MOVIMOT D inverter/geared motor combination from SEW-Eurodrive (16-Jul-2008)
SEW Eurodrive has expanded its MOVIMOT range of inverter/geared motor combinations by introducing new MOVIMOT D with continuous operating power up to 4kW.
SEW Eurodrive
27 Beverage Dr
Tullamarine VIC 3043
Tel: 03 9933 1000
Fax: 03 9933 1003
Supplier´s Website
Enquire now
Incorrect details?
27 Beverage Dr
Tullamarine VIC 3043
Tel: 03 9933 1000
Fax: 03 9933 1003
Supplier´s WebsiteEnquire now
Incorrect details?
SEW Eurodrive Products
Decentralized Drives and Controllers
24hr Emergency Support Service
Integrated Positioning and Sequence Control System
SEW - Eurodrive Motors and Gearmotors
SEW - Eurodrive Servo Technology and Frequency Inverters
SEW - Eurodrive Industrial Gear Units
SEW Eurodrive Information
SEW Eurodrive News
MOVIMOT D inverter/geared motor combination from SEW-Eurodrive (16-Jul-2008)
SEW Eurodrive has expanded its MOVIMOT range of inverter/geared motor combinations by introducing new MOVIMOT D with continuous operating power up to 4kW.
SEW Eurodrive introduces DUV10A vibration analysis sensor (7-Jul-2008)
SEW Eurodrive has introduced its new DUV10A vibration analysis sensor to assist in the prevention of unplanned gear-unit downtime.
SEW Eurodrive's inputs on revised Minimum Energy Performance Standards for three-phase induction motors (5-Jun-2008)
SEW Eurodrive explored the recent revision of Minimum Energy Performance Standards (MEPS), with respect to electric three-phase induction motors, at the National Manufacturing Week 2008 breakfast seminar.
SEW Eurodrive to exhibit total drive solutions at NMW 2008 (12-Mar-2008)
SEW Eurodrive, a drive solutions provider, will demonstrate its total solutions approach for the manufacturing industry at National Manufacturing Week 2008, which will be held at the Sydney Convention and Exhibition Centre, Darling Harbour, 27 to 30 May.
SEW-Eurodrive to unveil CMP servo series at National Manufacturing Week 2008 (6-Mar-2008)
The new Australia-assembled CMP servo series will be unveiled at SEW-Eurodrive’s stand at National Manufacturing Week 2008: stand No. 4806, Sydney Convention and Exhibition Centre, Darling Harbour, 27 to 30 May, 2008.
SEW-Eurodrive extends new modular motor series (4-Mar-2008)
SEW-Eurodrive leads the way in end-to-end drive system efficiency, with the imminent extension of its DR series to 45kW.
SEW-Eurodrive to launch Movitrac LTE version B inverter at NMW (29-Feb-2008)
At National Manufacturing Week in May 2008 SEW-Eurodrive, will launch the next evolution of the company’s Movitrac LTE series of frequency inverters - the Movitrac LTE version B.
Robin Hood wins SEW Victoria Cup (16-Jan-2008)
Robin Hood and driver Gavin Lang have taken out an important harness racing events in Australia, and the feature race of the SEW-Eurodrive Victoria Cup Carnival, the Victoria Cup.
SEW Eurodrive participates in SIRF Roundtables industry forum held in Melbourne (18-Dec-2007)
SIRF Rt, an initiative following on from the Strategic Industry Research Foundation industry group promotes the implementation of best practices throughout the manufacturing and process industries.
SEW celebrates its 25 years in Australia (7-Nov-2007)
Marking 25 successful years in Australia, leading drives solution group, SEW-Eurodrive, celebrated with over 500 guests at Melbourne’s Moonee Valley racecourse.
SEW-Eurodrive releases new series motion controllers (1-Oct-2007)
Drives solution group, SEW-Eurodrive, has released new MOVI-PLC advanced series of PLC/motion controllers--the DHE41B.
SEW bolsters industrial gear production capabilities (13-Aug-2007)
Leading drives solutions provider, SEW-Eurodrive, has announced plans to construct a new manufacturing facility alongside its global headquarters in Bruchsal, Germany.
SEW Eurodrive to introduce new X series industrial gear solution at Aimex 2007 (1-Aug-2007)
At Aimex 2007, leading drives solution group, SEW-Eurodrive will introduce the Australian mining industry to the company’s sophisticated new industrial gear solution--the SEW-Eurodrive X series.
SEW-Eurodrive launches IGX industrial gear range at AIMEX (24-Jul-2007)
SEW-Eurodrive will have the Australian launch of its X series (IGX) range of heavy industrial gears on Stand 1311 during AIMEX 2007 – Asia Pacific’s International Mining Exhibition, to be held at Sydney’s Olympic Park from September 4 to 7, 2007.
SEW-Eurodrive celebrates 25 years of engineering service (9-Jul-2007)
Throughout its 25-year Australian history, SEW-Eurodrive has been active in the wider community, with involvement in sport, cultural pursuits and charities.
SEW Eurodrive supporting the Eels in 2007 (7-Jun-2007)
Concentration shows as Parramatta Eels players, sponsored by SEW Eurodrive, watch the outcome during a tense moment in the NRL.
SEW-Eurodrive unveils DAS ASEPTIC AC induction motor series (17-May-2007)
SEW-Eurodrive, a drives solution group, has unveiled DAS ASEPTIC AC induction motor series to Australian industry.
SEW-Eurodrive represents Tasman Motorsport (30-Apr-2007)
SEW-Eurodrive, a leading, global designer and developer of mechanical power transmission systems and motor control electronics, is supporting Tasman Motorsport with a full-season car sponsorship in 2007.
SEW-Eurodrive to celebrate 25 years in Australia (5-Apr-2007)
SEW-Eurodrive will be celebrating 25 years in Australia, as well as showcasing its Australian-assembled MC Compact industrial gear unit on Stand 4606 during National Manufacturing Week 2007 at Melbourne Convention & Exhibition Centre, from May 22 to 25.
SEW-Eurodrive will be celebrating 25 years in Australia, as well as showcasing its Australian-assembled MC Compact industrial gear unit on Stand 4606 during National Manufacturing Week 2007 at Melbourne Convention & Exhibition Centre, from May 22 to 25.
SEW to unveil decentralised drive system at NMW (29-Mar-2007)
A new decentralised drive system that has been tailored for field installation will be unveiled by leading drives solution group, SEW-Eurodrive, at the National Manufacturing Week expo in May 2007.
SEW-Eurodrive to showcase advanced range of drive technologies at AUSPACK 2007 (14-Mar-2007)
At AUSPACK 2007, Australia’s packaging industry will have the opportunity to explore the future of mechanical power transmission and electronic drive control solutions at the SEW-Eurodrive Australia stand.
SEW-Eurodrive re-engineers its website (8-Dec-2006)
Leading drives solutions group, SEW-Eurodrive, has re-engineered its website, giving the pages a fresh design, clearer layout, and even faster and more efficient information retrieval.
SEW-Eurodrive unveils advanced version of MOVITRAC standard frequency inverter range (30-Nov-2006)
Global drive solutions group, SEW-Eurodrive, has unveiled a technologically advanced version of its renowned MOVITRAC standard frequency inverter range. Founded on the company’s popular MOVITRAC 07 series, the new MOVITRAC B series is available in nine separate frame sizes, and supports over 20 power ratings ranging from 0.25 kW to 132 kW.
General-purpose inverter/geared motor duo (18-Sep-2006)
SEW-Eurodrive will unveil its complete MOVITRAC LT family of general-purpose frequency inverters at the 2006 Manufacturing Technology InFocus exhibition in Melbourne next month.
SEW's electronics 'control continuum' (7-Sep-2006)
AUSTRALIA's most complete motor control electronics selection will be exhibited by global drive solutions group SEW-Eurodrive at this year's Manufacturing Technology InFocus exhibition in Melbourne.
SEW-Eurodrive to showcase products at BULKEX 2006 (1-Sep-2006)
At BULKEX 2006, global drives solutions provider SEW-Eurodrive will present visitors with a display of end-to-end drives solutions tailored for the bulk handling sector.
At BULKEX 2006, global drives solutions provider SEW-Eurodrive will present visitors with a display of end-to-end drives solutions tailored for the bulk handling sector.
SEW-Eurodrive launches new assembly facility (1-Sep-2006)
Leading drives solution group, SEW-Eurodrive, has slashed gear unit turnaround times, with the establishment of a new assembly facility at its Australian headquarters in Melbourne.
SEW-Eurodrive plans to unveil MOVITRAC LT family of inverters (24-Aug-2006)
SEW-Eurodrive, a global drive solutions group, plans to unveil the complete MOVITRAC LT family of general-purpose frequency inverters at the 2006 Manufacturing Technology InFocus exhibition in Melbourne.
Andrew Jones races in the world’s toughest competition (21-Aug-2006)
Proudly sponsored by drives solutions group, SEW-Eurodrive, Team Tasman Motorsport's Andrew Jones races his Commodore VZ in the Fifth Round of the V8 Supercar Championships. Participating in one of the world's toughest touring car competitions, Supercar competitors reach top speeds of 300 km/h --demonstrating that SEW-Eurodrive is always in top gear.
Da Vinci’s ideas spring to life (17-Aug-2006)
SEW-Eurodrive is presenting The Da Vinci Machines: an exhibition of genius
SEW-Eurodrive is presenting The Da Vinci Machines: an exhibition of genius
High efficiency motors and controllers (9-Aug-2006)
SEW-Eurodrive will be exhibiting some new and innovative products on Stand 1713 during the Queensland Manufacturing Technology Exhibition (QMan), at the Brisbane Convention & Exhibition Centre, from October 17-19.
SEW-Eurodrive will be exhibiting some new and innovative products on Stand 1713 during the Queensland Manufacturing Technology Exhibition (QMan), at the Brisbane Convention & Exhibition Centre, from October 17-19.
End-to-end 'packaged drives' solutions (4-Aug-2006)
GLOBAL drives solutions provider SEW-Eurodrive will present BULKEX 2006 visitors with a display of end-to-end drives solutions tailored for the bulk handling sector. SEW-Eurodrive's so-called 'packaged drives' solution provides complete in-house engineered drives solutions.
GLOBAL drives solutions provider SEW-Eurodrive will present BULKEX 2006 visitors with a display of end-to-end drives solutions tailored for the bulk handling sector. SEW-Eurodrive's so-called 'packaged drives' solution provides complete in-house engineered drives solutions.
IP55-rated frequency inverter (26-Jul-2006)
SEW-Eurodrive has extended its MOVITRAC LT series of frequency inverters with the release of an IP55-rated MOVITRAC LT frequency inverter.
Heavily getting into gears (8-Jun-2006)
SEW-Eurodrive’s latest industrial gears range includes five series of helical and planetary gear units with drive products especially designed for heavy-duty applications with high transmitted loads.
SEW-Eurodrive’s latest industrial gears range includes five series of helical and planetary gear units with drive products especially designed for heavy-duty applications with high transmitted loads.
Electro-mechanical drivetrain launch at QME (7-Jun-2006)
A number of new electro-mechanical drivetrain products will be introduced by SEW-Eurodrive on stand 6071 - 9197 during the 2006 Queensland Mining & Engineering Exhibition (QME) from 25 to 27 July at the Mackay Showgrounds.
A number of new electro-mechanical drivetrain products will be introduced by SEW-Eurodrive on stand 6071 - 9197 during the 2006 Queensland Mining & Engineering Exhibition (QME) from 25 to 27 July at the Mackay Showgrounds.
Distributed networks bring control closer (6-Jun-2006)
The combination of small universal PLCs, coupled with advances in network communications, is allowing manufacturers to bring control and execution even closer to the machine.
The combination of small universal PLCs, coupled with advances in network communications, is allowing manufacturers to bring control and execution even closer to the machine.
Germany's SEW-Eurodrive celebrates 75 years (17-May-2006)
Drive engineering specialist SEW-Eurodrive this year celebrates the 75th anniversary of its founding in Germany, in 1931.
Drive engineering specialist SEW-Eurodrive this year celebrates the 75th anniversary of its founding in Germany, in 1931.
PLC/motion controller series (3-May-2006)
AT National Manufacturing Week 2006, SEW-Eurodrive will unveil the first release of its new PLC/motion controller series--the MOVI-PLC. Provided in an expanding range of form-factors and performance classes, MOVI-PLC permits entirely new levels of control system decentralisation.
Mixing with the best (19-Feb-2006)
Innovative gear unit solutions form the backbone of a customised gearbox capable of absorbing the high bending and axial forces that occur in agitator/aerator applications. *Ben Lazzaro writes for FOOD magazine
Innovative gear unit solutions form the backbone of a customised gearbox capable of absorbing the high bending and axial forces that occur in agitator/aerator applications. *Ben Lazzaro writes for FOOD magazine
Motor efficiency highly rated (8-Feb-2006)
2006 represents a new age of motor efficiency for Australia, with the latest regulations set to benefit the environment and end-users alike.
2006 represents a new age of motor efficiency for Australia, with the latest regulations set to benefit the environment and end-users alike.
Double winner at Victoria Cup (18-Jan-2006)
The Victoria Cup Carnival, one of Australia’s most important harness racing events, recently proved a double win for drives technology group SEW-Eurodrive.
The Victoria Cup Carnival, one of Australia’s most important harness racing events, recently proved a double win for drives technology group SEW-Eurodrive.
TorqLOC range extended (21-Nov-2005)
SEW Eurodrive has extended its popular TorqLOC keyless hollow shaft drive mounting system. Originally available for gear sizes of 37 to 97, the TorqLOC range now accommodates parallel shaft helical and helical-bevel gear sizes up to 107. This allows the mounting system to be used for applications with output torque requirements of up to 8000Nm.
Clever drives for clever docking (16-Nov-2005)
Automation engineering group CIES revolutionises the design of aircraft heavy maintenance docking systems through the use of intelligent drives from SEW-Eurodrive.
Automation engineering group CIES revolutionises the design of aircraft heavy maintenance docking systems through the use of intelligent drives from SEW-Eurodrive.
14 Industrial Ethernet solutions under the spotlight (10-Oct-2005)
The market has become inundated with new comms solutions, all based on Ethernet. Here’s a comparative study that makes sense of them all.
The market has become inundated with new comms solutions, all based on Ethernet. Here’s a comparative study that makes sense of them all.
Clever drives for clever docking (12-Sep-2005)
A BOEING 767 has a typical wing span of 52m, a tail height of 17m, an overall length of 61m, and is composed of more than three million parts. During heavy maintenance periods the aircraft spends several weeks stationed in a hangar, while up to 75 technicians scurry around like ants on an anthill, performing a series of safety checks and inspections.
A BOEING 767 has a typical wing span of 52m, a tail height of 17m, an overall length of 61m, and is composed of more than three million parts. During heavy maintenance periods the aircraft spends several weeks stationed in a hangar, while up to 75 technicians scurry around like ants on an anthill, performing a series of safety checks and inspections.
Gearbox mixes it with the best (5-Sep-2005)
Innovative gear unit solutions form the backbone of a customised gearbox that can absorb the high bending and axial forces in agitator applications.
Innovative gear unit solutions form the backbone of a customised gearbox that can absorb the high bending and axial forces in agitator applications.
Packaged drives at Mining & Energy 2005 (26-Aug-2005)
THE Mining and Energy Exhibition 2005 will provide a venue for a display of end-to-end drives solutions tailored to applications in the mining and energy sectors, by global drives solution provider, SEW-Eurodrive. The packaged drive solutions are products of the company's complete in-house engineering capabilities.
Low cost frequency inverters at Automate (1-Aug-2005)
AN ultra-compact and low-cost series of frequency inverter will be exhibited by global drive solutions group, SEW-Eurodrive, at September's Automate exhibition in Sydney. The MOVITRAC LT is ideal for low-power variable-speed applications such as fans, pumps, machine tools and conveyors.
Packaging machine OEM converts from pneumatics to servo controllers (11-Jul-2005)
MELBOURNE engineering group, Scope Machinery, specialises in the design and manufacture of ‘contact heat’ thermoforming machines which use heat and compressed air to produce moulded plastic packaging ‘trays’.
MELBOURNE engineering group, Scope Machinery, specialises in the design and manufacture of ‘contact heat’ thermoforming machines which use heat and compressed air to produce moulded plastic packaging ‘trays’.
Driving towards decentralised intelligence (20-Jun-2005)
Decentralised motor control architectures are set to cause a stir in the minerals processing sector.
Decentralised motor control architectures are set to cause a stir in the minerals processing sector.
Extended bearing distance gears for mixing applications (15-Jun-2005)
SEW-Eurodrive has extended the MC Compact series of helical and helical-bevel gear units for mixer and agitator applications. The units have an extended bearing distance (EBD), providing customised gear units capable of absorbing the high bending moments and axial forces that occur in agitator applications.
More scope to improve (9-Jun-2005)
Smart thinking enables Scope Machinery to push thermoforming machine throughput and accuracy up a couple of notches when it comes to servo control systems.
Smart thinking enables Scope Machinery to push thermoforming machine throughput and accuracy up a couple of notches when it comes to servo control systems.
Safety stops: a drive feature, not an extra (18-May-2005)
Latest generation drive technologies with integrated safety stop functionality offer a viable alternative to the traditional hardwired safety stop designs.
Latest generation drive technologies with integrated safety stop functionality offer a viable alternative to the traditional hardwired safety stop designs.
SEW begins local assembly of servo motor packages (16-May-2005)
SEW-Eurodrive has begun full assembly of its three-phase permanent-magnet CM servo motors at its Melbourne headquarters.
SEW-Eurodrive has begun full assembly of its three-phase permanent-magnet CM servo motors at its Melbourne headquarters.
New motors made locally (13-Apr-2005)
A new family of locally-assembled servo motors, the three-phase permanent-magnet CM servo series, will be unveiled by SEW-Eurodrive at National Manufacturing Week 2005.
A new family of locally-assembled servo motors, the three-phase permanent-magnet CM servo series, will be unveiled by SEW-Eurodrive at National Manufacturing Week 2005.
Minimal-backlash servo gear units (9-Mar-2005)
A NEW generation of minimal-backlash servo gear units will be showcased by drive solutions provider SEW-Eurodrive at National Manufacturing Week in May. The re-engineered 'PSF' series of planetary gear units and new 'BSF' series of helical-bevel gear units offer superior torque handling for a given model size.
Three-phase locally-assembled servo motors (9-Mar-2005)
A NEW family of locally-assembled servo motors will be unveiled by SEW-Eurodrive at this year's National Manufacturing Week. The three-phase permanent-magnet CM servo series is now fully assembled in Australia, ensuring SEW-Eurodrive can provide fast turnaround on complete servo packages.
Geared motors and gear units (9-Feb-2005)
SEW-EURODRIVE is a global market leader of design and development of mechanical power transmission systems, and motor control electronics. It is exhibiting at the Adelaide Manufacturing and Technology Trade Show from the 16th to the 17th of March.
SEW-EURODRIVE is a global market leader of design and development of mechanical power transmission systems, and motor control electronics. It is exhibiting at the Adelaide Manufacturing and Technology Trade Show from the 16th to the 17th of March.
Victoria Cup a winner for SEW (3-Feb-2005)
SEW-Eurodrive personnel were doubly rewarded by the SEW-Eurodrive Victoria Cup harness race at Melbourne's Moonee Valley on December 18 last year.
Low-cost frequency inverter (24-Jan-2005)
SEW-Eurodrive has released the Movitrac LT frequency inverter, suitable for low-power variable-speed applications such as fans, pumps, machine tools and conveyors.
Electronic product catalogue (20-Jan-2005)
SEW-Eurodrive, has released an updated version of its interactive electronic product catalogue, EKAT. The PC application has been revised to include the latest SEW-Eurodrive technologies and additional geared motor product information.
Drive operator panels (18-Jan-2005)
SEW-Eurodrive has released the DOP series of drive operator panels. The panels provide a visual link between machine and operator. Its five units offer combined operational control and status monitoring, and are suitable for motor control electronics and control networks.
Cranes with intelligent drive inverters (22-Oct-2004)
JDN MONOCRANE’s range of single and double-girder cranes uses SEW-Eurodrive’s intelligent drive inverter technology and geared motors.
JDN MONOCRANE’s range of single and double-girder cranes uses SEW-Eurodrive’s intelligent drive inverter technology and geared motors.
Low-cost frequency inverter (17-Sep-2004)
SEW-Eurodrive is launching a compact and low-cost series of frequency inverters.
Low-cost frequency inverter (13-Aug-2004)
A NEW ultra-compact and low-cost series of frequency inverter will be launched by global drive solutions group, SEW-Eurodrive, at October’s Automate exhibition in Melbourne.
New drive operator panel family (6-Aug-2004)
THE latest addition to the portfolio of sophisticated drives solutions from SEW-Eurodrive is a new family of drive operator panels, known as the DOP series. To be launched at Melbourne's Automate exhibition in October this year, the new DOP series provides the critical visual link between machine and operator.
Complete Movidrive 'B' series unveiled (6-Aug-2004)
THE complete series of the Movidrive 'B' application inverter, from drives solutions provider SEW-Eurodrive, will be unveiled to visitors at the Automate exhibition in early October this year. Comprising seven sizes in all, the Movidrive 'B' offers OEMs an application inverter of optimal versatility.
Extended power for MOVITRAC inverters (24-Mar-2004)
DRIVE solutions group SEW-Eurodrive has extended the power range of its MOVITRAC 07 standard frequency inverter series to 45 kilowatts (kW). To be unveiled at National Manufacturing Week 2004, the enhanced series brings, compact and affordable drive control technology to more powerful applications.
Frequency inverter software (12-Mar-2004)
SEW-Eurodrive has released the latest version of its complimentary frequency inverter configuration and programming software, Movitools.
Application inverters (12-Mar-2004)
SEW Eurodrive has released the Movidrive B series of application inverters. It combines versatility, processing power and cost-efficiency.
Free programming software tool (3-Feb-2004)
SEW-Eurodrive has launched the latest version of its complimentary frequency inverter configuration and programming software, Movitools. Movitools provides a user-friendly PC-based interface for the start-up, commissioning, maintenance, and programming of SEW-Eurodrive's frequency inverter products.
Packaged drives at Bulkex 2004 (6-Jan-2004)
SEW-Eurodrive will present a display of end-to-end drives solutions tailored for the bulk handling sector at Bulkex 2004, the national bulk materials handling exhibition. SEW-Eurodrive’s ‘packaged drives’ provide complete in-house engineered drives solutions for conveyors, feeders and transfer blowers.
New series of application inverters (12-Dec-2003)
SEW-EURODRIVE has announced the release of a new series of MOVIDRIVE application inverter. The new MOVIDRIVE “B” offers Australian manufacturers and OEMs an application inverter of optimal versatility, processing power and cost-efficiency.
Cast-copper induction motor drives (4-Nov-2003)
SEW-EURODRIVE, has released Australias first range of compact high-efficiency induction motors based on advanced cast-copper rotor technology.
Industrial helical and planetary gear units (3-Nov-2003)
SEW-EURODRIVE has announced the expansion of its product range to include industrial gears.
Corrosion resistant hollow shaft mounting (3-Nov-2003)
THE TorqLOC keyless hollow shaft mounting system, from SEW-EURODRIVE, offers manufacturers operating in wet and wash down environments a good solution for coupling drive systems to their machinery.
Collapse | RSS Feed 
SEW Eurodrive Products & Services
- Servo Control
- Application Inverters
- Brakes
- Motors
- Programmable Logic Controllers
- Micro-controller Plcs
- Stainless Steels
SEW Eurodrive Brands
- Compact
- Movidrive
- Movidyn
- Movimot
- Movi-Switch
- Movitrac
- SEW-Eurodrive
- Varimot