Home > Rydell offers Ammeraal Beltech conveyor belts for the particle board industry

Rydell offers Ammeraal Beltech conveyor belts for the particle board industry

Supplier News
article image Infeed Belt
logo
02 98317300

Contact supplier

Your Email * indicates mandatory fields.
image

Rydell Industrial (Belting) Co  in conjunction with Ammeraal Beltech has available all the different conveyor belts used in the particle board industry.
 
Modern high performance wood processing machines produce large volumes of particle board, MDF, HDF, OSB and plywood.
 
Leading OEMs and end users often choose Ammeraal Beltech belting solutions for reliable and safe processing and as the exclusive Australian agent for Ammeraal Beltech, Rydell are pleased to be able to offer these belts to the Australian particle board industry.
 

De-airing belt for the Particle Board Production

 
The effectiveness of the Ammeraal Beltech de-airing belt is already proven on many installations worldwide. The operation is based on a balanced air-permeability, the highest conductivity and a smooth non-stick cover.
 
De-airing belts are made from high quality polyester monofilament. Carefully selected carbon yarns woven in a maze structure assure the best electrostatic discharge and prevent particle build up.
 
Main features:

  • Highly flexible
  • Excellent tracking properties
  • Balance air permeability
  • Good abrasion and chemical resistant
  • Easy to clean surface
  • Resistant against high pressure and good distribution of compression
  • Highly antistatic due to carbon maze
Benefits:
  • No particle build-up as a result of electrostatic discharge
  • High production safety
  • High quality production
  • ATEX approved

Pre-Press belt for Particle Board Production
 
Ammeraal Beltech Ropanyl pre-press belts are made of aramide fabric with a highly qualified cover surface to provide maximum compressing and reliable distribution of compression.
 
Main features:
  • High force/elongation value
  • Good abrasion resistance and homogenous belt surface
  • Excellent antistatic properties, no build-up of electronic charge
  • Very good chemical resistant
  • Resistant against high pressure, good distribution of compression
  • Strong splice made with unique Maestro equipment
Benefits:
  • Excellent belt performance
  • High production safety
  • Maintenance free
  • High quality production
  • Long belt life
  • ATEX approved

Forming belt for Particle Board Production
 
The effectiveness of Ammeraal Beltech forming, transfer and accelerator belts is already proven on many installations worldwide. The operation is based on high flexibility and combined with transversal stability and meets all requirements of the forming process.
 
Ropanyl forming belts are made of high quality fabric with a thin PU coating to provide reliable processing of wood fibres and chips.
 
Main features:
  • Longitudinally flexible, suitable for transfers with small diameter pulleys
  • Dimensionally stable, excellent tracking properties and perfectly flat
  • Very good antistatic properties, no material accumulation due to build-up of electronic charge
  • Good abrasion and chemical resistant
  • Easy to clean cover surface
  • High force/elongation value, suitable for high loads and long conveyors, no re-tensioning required
  • Strong splice made with unique Maestro equipment
Benefits:
  • Good belt performance due to the belt construction and flatness
  • Maintenance free
  • Long belt life
  • ATEX approved

Infeed belt for Particle Board Production
 
Ammeraal Beltech has an infeed belt for conti-presses based on the Ziplink concept: the quickest splice method ever allows you to install a seamless belt without disassembling your machine, resulting in major increase of your production time and cost saving.
 
Ammeraal Beltech infeed belts are made of a high quality polyester monofilament with a Silam silicone impregnation. The special design allows the belt to operate on small pulleys and knife edges.
 
Main features:
  • Longitudinally flexible, suitable for small diameter transfer and knife edge
  • Dimensionally stable; excellent tracking properties and perfectly flat
  • Low friction bottom-side
  • Resistant against high temperatures
  • Seamless
Benefits:
  • Quick installation or repair, shortest production downtime
  • Smooth, economical operation, less energy consumption
  • Long belt service life
  • ATEX approved

Newsletter sign-up

The latest products and news delivered to your inbox