Companies to exhibit products at AIMEX 2007

By Reed Exhibitions

Got a Question for Reed Exhibitions?

Exhibitors at AIMEX 2007, both large and small, are planning some major product releases at the exhibition. Here is a quick snapshot of just a few of them.

Akron Brass will be release a new range of manual, remote-controlled and PLC controlled water cannons and fire fighting nozzles.
Alcoa Fastening Systems will show a number of developments in its Huck fastener range
Ampcontrol will unveil a new Intrinsically Safe Ethernet Switch and Protocol Converter that has been developed as part of the CSIRO NEXSYS system
Australian Laboratory Services will display a new cost-effective oil analysis test package designed for industrial plants where a standard oil analysis may not be telling the full story
Australian Urethane Systems will exhibit the latest Polyeuro polyurea and polyurethane coatings for the mining industry, including Polyeuro, Eagle Shield, and Stainguard
CBM International will release its third-generation online conveyor belt monitoring systems, which incorporate the world’s first online high-resolution steel cord scanning, wear profile analysis and visual inspection systems
Cobra South Pacific will showcase a new range of Depreux solid woven conveyor belting and Goro belt fasteners
Concentric Asia Pacific will launch its Virtools virtual reality software system
Danfoss Australia will display its new VLT family of AC drives, which range in capacity from 0.18kw to 1.2MW
Dixon (Asia Pacific) will release its new quick disconnect coupling range
Furukawa will release a new range of hammer rock drills
GijimaAst will release two new software products, mineMarkup and EPS Viz
GPSat Systems Australia will show the latest GPS receiver technology from NovAtel
Hedweld Engineering will launch its new ATACH project for safely handling all driveline components, from tyre to hub and strut
Hyundai Australia will launch its new R800LC 7A 80t excavator
Jaws Buckets & Attachments will display information about its new large dump body manufacturing facility, which is designed for the largest mining trucks currently made
Lewis Pulleys will display the new Birn VTP ventilated turbo pulley
Marathon Tyres will launch a puncture-resistant rubber tyre lining, and a new range of rims and wheels
Mine Site Technologies (NSW) will show a number of new technologies, including its ImPact underground digital communication network, ICCL cap lamp with radio and 802.11b RFID tag, and Proximity Detection System
Mining haulage system manufacturer Powertrans will release its own-design prime mover tractor unit for its unique mine haulage systems
Minova Australia will display a new range of resin capsules aimed at significantly improving the installation quality of resin bolts
Modular Mining Systems will release its latest advances in mining technology, including new modules for the ProVision NextGen GPS-guided fleet management software, and DISPATCH NextGen mine management software
MTU Detroit Diesel Australia will display the new 90-litre 2800kW (3500hp) 20V4000 twin-turbocharged diesel engine–the new horsepower leader of the V4000 range
New like Steel cutable rockbolts that combine the high torque installation strength of steel with the flexibility and safety of traditional cutable bolts will be displayed by Applied Research of Australia
New FMC 2000 Series conveyor idler rolls, which exceed CEMA load ratings, will be unveiled by FMC technology
PANDUIT will display its updated stainless steel strapping system
RUD Chains will display new tyre-protection chain, lifting and bulk materials handling products
Sealed Air Australia will demonstrate its new Instapak packaging foam solutions
SEW-Eurodrive will launch the X series (IGX) range of heavy industrial gears
SIR Meccanica will display its new patented portable in-line boring/overlay welding machine tools for restoring worn pivot points to their original dimensions
Spitwater will launch its new Brute hot water pressure cleaner
The latest BROKK radio controlled demolition robot will be shown by Kiwi Operation Downunder–the new robot is better able to work in hot conditions, and has improved hydraulics and greater strength, compared to previous models
The new Tru-Kleen oil sampler designed to take a live oil sample safely and cleanly, will be displayed by Bard Engineering
Victron Energy BV will introduce to Australia its power solutions for stand-alone, standby and back-up power systems
WEG Australia will release its new range of permanent magnet synchronous inverter motors, a new roller table motor and a new range of generators.

More information is available at Reed Exhibition .

20/08/2007 12:00 AM

Got a question about this product

More information about this product

Contact Details

Send to a friend

Contact Reed Exhibitions

By sending this enquiry you will also be informed of other related opportunities.

* First Name

Surname

Phone

* Your Email

State

Message

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

Get new security code

* does not match

Send Enquiry

Other products like this one

Medical and Industrial Power Supplies from Benbro Electronics

Benbro Electronics are specialists in the design and creation of both Medically Approved and Industrial Regulated DC Power Supplies. Benbro Electronics also engineer and stock specialty battery chargers designed for ...

Enquire Now

Mining Communications from TR

There's no doubt effective communications plays a major role in mining and tunnelling operations. Miner safety. Site security. Communicating underground. Navigating in unclear conditions. Blocked radio signals. Tracking ...

Enquire Now

DC-DC Converters from Benbro Electronics

Specialising in the design and manufacture of DC-DC converters, Benbro Electronics have developed, and stock, a wide a range of range of DC converters specifically designed for high reliability applications. Communication ...

Enquire Now

Skid Steer Loaders from Caterpillar

The Cat Skid Steer Loader and range of Cat Work Tools deliver jobsite versatility and efficiency to meet all customers needs.Differentiating FeaturesThe Cat Skid Steer Loaders deliver exceptional performance, versatility, ...

Enquire Now

Hydraulic Hose Crimping and Cutting Machines from Sheetmetal Machinery Australia

The Best in Hose Working Technology The range of Hydraulic hose crimping and cutting machines were the first products manufactured by the company Lillbacka Powerco Oy under the trade name Finn-Power and are now available ...

Enquire Now

News sign up

The Bumper Nozzle from Technical projects

New Bumper Nozzle from Technical Projects (29/10/2009)

Technical Projects releases the Bumper Nozzle, a new nozzle built for comfort, practicality and a lifetime of heavy duty action.

The 10mA, 6kA RCBO is available in Australia through CrispTech (28/10/2009)

Following on from the introduction of the MACK Electrical MRR series of 6kA RCBO’s, CrispTech announce the release of a 10mA version.

AR Modular RF introduces ‘Mini Footprint’ 50-Watt Auto-Tuning Booster Amplifier (26/10/2009)

AR Modular RF has introduced a new portable, lightweight, fully automatic band-switching RF booster amplifier for single or multi-band VHF/UHF tactical radio equipment.

Integrated remote control and security systems from CrispTech (23/10/2009)

A European-based engineering company recently received the complicated project of implementing an integrated control and security system for the Electric Metropolitan Light Railway in Bergamo.

Communication solutions for portable and maritime mobile transceivers from Caelera (9/10/2009)

The new CMX885 Marine VHF baseband processor is designed to meet the global requirements of low cost, highly integrated marine VHF transceivers.

RSS Feed

News sign up

Sections

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.

Companies to exhibit products at AIMEX 2007

Other products like this one

Related Articles

Sections