Single chip, CMOS Bluetooth solution

Got a Question for RF Parts Australia?

The SiW3500 UltimateBlue IC.

SILICON Wave and RF Micro Devices, represented by RF Parts Australia , has introduced the SiW3500 UltimateBlue IC, a complete single-chip CMOS Bluetooth solution.

The SiW3500 helps speed time to market and implements new features found in Bluetooth specification version 1.2, including faster connecting times, Adaptive Frequency Hopping (AFH) for improved coexistence of Bluetooth with other 2.4GHz devices, and extended SCO for improved voice transmissions.

The integrated circuit combines a direct conversion radio modem with an ARM7TDMI processor core, Bluetooth baseband logic, and complete protocol software in ROM.

The SiW3500 chip is a complete platform that can execute additional upper layer protocol stack and application software functions, including additional complex audio processing algorithms such as noise cancellation without a separate DSP.

The SiW3500 UltimateBlue single-chip Bluetooth IC is compliant with Bluetooth specification version 1.2 mandatory and optional features including Adaptive Frequency Hopping (AFH), and extended SCO (eSCO).

The device features a direct conversion architecture with good receiver blocking performance optimised for RF hostile environments within mobile phones.

The on-chip 50Ω RF matching network requires no external matching component for direct connection to an antenna. On-chip ROM storage is also featured with dynamic software patch capability.

The SiW3500 supports all standard mobile phone reference clock frequencies.

The device also offers fast hardware-based Automatic Gain Control (AGC) circuit that dynamically adjusts the receiver for optimal performances.

The integrated 32-bit ARM7TDMI processor core enables an open software development platform facilitating the integration of upper layer stack and profiles.

Built-in UltimateBlue coexistence technology software reduces interference to 802.11 devices.

The temperature compensation circuit stabilises performance from -40°C to +85°C. An extended high temperature range to +105°C is available.

The device has a 96-pin 6mm x 6mm VFBGA package, and bumped die option.

20/11/2003 12:00 AM

Got a question about this product

More information about this product

Contact Details

Send to a friend

Contact RF Parts Australia

By sending this enquiry you will also be informed of other related opportunities.

First Name

Surname

* Your Name

So the supplier can address you personally

Phone

Will only be sent to the supplier, no one else

* Your Email

Will only be sent to the supplier, no one else

State

So you get the most relevant information

Personal Message

No Yes

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

* does not match

Send Enquiry

More products from RF Parts Australia

RF and Wireless Communication Solutions from RF Parts

Applications and markets include: Cellular Handset and Mobile Devices Wireless Infrastructure Broadband Transmission Broadband CPE ISM Band Transceivers WiFi and WiMAX Aerospace and Defence General ...

Enquire Now

News sign up

Additional RF Parts Australia News

VCO – L Band, low phase noise voltage-controlled oscillators from RF Parts Australia (26/11/2009)

Z-Communications releases 3 new Voltage-Controlled Oscillators for the L Band, now available through RF Parts Australia.

RFFC0085 out of band tuner from RF Parts (31/10/2009)

RF Parts introduces RFMD’s new frequency converter integrated circuit (IC), the RFFC0085.

GaN Power Doubler Hybrid Module from RF Parts (30/10/2009)

RFMD releases the industry's first "green" gallium nitride (GaN) based CATV amplifier modules. The D10040200PL1 and D10040230PL1 are designed for use as power doubler amplifiers in current and next ge

PIM - Passive Intermodulation Standards / References (18/09/2009)

RF Laboratories Australia Pty Ltd have released a range of PIM ( Passive Intermodulation )Standards / References.

Multi-Use GaAs distributed amplifiers die from RF Parts (30/07/2009)

RF Parts announces RFMD’s SDA family line of directly coupled (DC) GaAs microwave monolithic integrated circuit (MMIC) distributed driver amplifier die.

ZRO0837H1LF Voltage controlled oscillator available from RF Parts (29/07/2009)

Avaialble from RF Parts, the ZRO0837H1LF is a new voltage controlled oscillator (VCO) model in UHF-band released by Z Communications.

VCO: SMV1205C-LF Features Ultra Low Phase Noise, available from RF Parts (20/07/2009)

Z-Communications, represented by RF Parts Australia, announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model SMV1205C-LF in L-band.

RFMD, represented by RF Parts Australia, introduce the SUF-5033 PHEMTMMIC AMPLIFIER (6/07/2009)

RFMD, represented by RF Parts Australia, introduce the SUF-5033 is a monolithically matched broadband high IP3 gain block covering 0.1GHz to 4.0GHz. This pHEMT FET-based amplifier uses a patented self

RFMD, represented by RF Parts Australia, introduce the SUF-8533 amplifier (3/07/2009)

RFMD, represented by RF Parts Australia, introduce the SUF-8533, a monolithically matched high IP3 broadband pHEMT MMIC amplifier covering DC to 12GHz. This pHEMT FET based amplifier uses a self-bias

RFMD, represented by RF Parts Australia, introduce the SUF-1033 amplifier (3/07/2009)

RFMD, represented by RF Parts Australia, introduce the SUF-1033 amplifier. This pHEMT based amplifier uses a patented selfbias network that operates from a single 5 V supply. It offers efficient casca

RF5501 3.3 V, Switch AND LNA Front End Solution (1/07/2009)

RFMD, represented by RF Parts Australia, introduce the RF5501, a front end solution for high-performance WLAN applications in the 2.4GHz to 2.5GHz ISM band.

RF5500 11B/G WLAN SP3T Switch (1/07/2009)

RFMD, represented by RF Parts Australia, introduce the RF5500, a SP3T switch that comes in a 2mm x 2mm x .5mm Pb-Free, 8-pin package.

RF5510 11B/G WLAN SP3T switch (1/07/2009)

RFMD, represented by RF Parts Australia, introduce the RF5510, a SP3T switch designed in a small 0.88mm x 0.80mm x 0.38mm FLIP CHIP die.

The RF5602 linear power amplifier by RF Parts

RFMD, represented by RF Parts Australia, introduce the RF5602, a linear power amplifier. (1/07/2009)

The linear power amplifier is manufactured on an advanced InGaP Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as the final RF amplifier in 802.11b/g/n access point tra

SUF-8533 cascadable pHEMT MMIC amplifiers available from RF Parts Australia (23/06/2009)

RFMD, represented by RF Parts Australia, have introduced SUF-8533, a monolithically matched high IP3 broadband pHEMT MMIC amplifier covering DC to 12GHz.This pHEMT FET based amplifier uses a self-bias

SUF-5033 cascadable pHEMT MMIC amplifiers available from RF Parts Australia (22/06/2009)

RFMD, represented by RF Parts Australia, have introduced SUF-5033, a monolithically matched broadband high IP3 amplifier with gain block covering 0.1GHz to 4.0GHz.This pHEMT FET-based amplifier uses a

RFMD SUF-1033 amplifiers available from RF Parts Australia (19/06/2009)

RFMD, represented by RF Parts Australia, have introduced the SUF-1033, a monolithically matched broadband high IP3 gain block covering DC to 20GHz. This pHEMT based amplifier uses a self-bias network

RF3023 Broadband Medium Power SPDT switches available from RF Parts Australia (18/06/2009)

RFMD, represented by RF Parts Australia, have introduced RF3023, a single-pole double-throw (SPDT) switch designed for general purpose switching applications which require low insertion loss and mediu

RF3021 SPDT switches available from RF Parts Australia (17/06/2009)

RFMD, represented by RF Parts Australia, have introduced the RF3021, a high isolation single-pole double-throw (SPDT) switch designed for general purpose switching applications requiring moderate inse

RFMD RF5602 linear power amplifiers available from RF Parts Australia (16/06/2009)

RFMD, represented by RF Parts Australia, have introduced the RF5602, which is a linear power amplifier IC designed for medium power applications. The device is based on an advanced InGaP Heterojunctio

RF3025 SPDT absorptive switches available from RF Parts Australia (15/06/2009)

RFMD, represented by RF Parts Australia, have introduced the RF3025, a high isolation single-pole double-throw (SPDT) absorptive switch designed for general purpose switching applications requiring mo

RF3024 SPDT switch for battery powered applications

RF3024 SPDT switches for battery powered applications available from RF Parts Australia (12/06/2009)

RFMD, represented by RF Parts Australia, have introduced RF3024, a single-pole double-throw (SPDT) switch, designed for general purpose switching applications which require low insertion loss, mode

OS10040320PW GaAs optical receiver module available from RF Parts (11/05/2009)

RFMD, represented by RF Parts Australia, have introduced the OS10040320PW, a hybrid high dynamic range optical receiver amplifier module operating from 40MHz to 1GHz.

D10040300GTH GaAs power doubler amplifier module available from RF Parts Australia (8/05/2009)

RFMD, represented by RF Parts Australia, have introduced the D10040300GTH hybrid power doubler amplifier module with high output capability.

Z-Communications CRO2562A-LF VCO model available from RF Parts Australia (23/04/2009)

Z-Communications, represented by RF Parts Australia, have announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model, CRO2562A-LF, in S-band. The CRO2562A-LF VCO operates at 2500 to 2625 MHz with a tuning voltage ...

Z-Communications CRO2781A-LF VCO available from RF Parts Australia (22/04/2009)

Z-Communications have announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO2781A-LF in S-band. The CRO2781A-LF VCO, available from RF Parts Australia, operates at 2780 MHz with

Z-Communications VCO model CRO1220A-LF available from RF Parts Australia (21/04/2009)

Z-Communications, represented by RF Parts Australia, have announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO1220A-LF in L-band.

SFS1685A-LF 1685MHz fixed frequency synthesiser available from RF Parts Australia (20/04/2009)

Z-Communications, represented by RF Parts Australia, announce a new RoHS compliant fixed frequency synthesizer model SFS1685A-LF in L-band. The SFS1685A-LF is a single frequency synthesiser that operates at 1685MHz.

RF2059 wideband frequency conversion chip available from RF Parts Australia (9/04/2009)

RFMD, represented by RF Parts Australia, have introduced the RF2059, a low power, high performance, wideband RF frequency conversion chip with integrated local oscillator (LO) generation and a pair of RF mixers.

Z-Communications VCO model ZRO1560A1LF available from RF Parts Australia (16/03/2009)

Z-Communications, represented by RF Parts Australia, announce a new RoHS compliant VCO (Voltage-Controlled Oscillator) model ZRO1560A1LF in L-band. The ZRO1560A1LF operates at 1560 MHz with a tuning v

Z-Communications VCO model CRO0410A-LF with 390MHz to 430 MHz tuning range available from R F Parts Australia (13/03/2009)

Z-Communications, represented by RF Parts Australia, have released the new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO0410A-LF in UHF band. The VCO model CRO0410A-LF operates from 390

HMIC PIN diode SPDT 20 Watt switches for higher power applications available from RF Parts (2/03/2009)

M/A-Com, represented by RF Parts in Australia, have introduced the new 20 Watt broadband HMIC PIN diode SPDT Switch for WiMAX, LTE and other high linearity/power applications.

ML5830 ASK/FSK transmitters available from RF Parts Australia (11/02/2009)

The ML5830 is a single chip, fully integrated Amplitude Shift Keyed (ASK) and Frequency Shift Keyed (FSK) transmitter developed for a variety of applications operating in the 5.790GHz to 5.840GHz band. ML5830 ASK/FSK transmitters ...

SPF-5344Z with two-stage pHEMT MMIC amplifier available from RF Parts Australia (27/01/2009)

The SPF-5344Z, available from RF Parts Australia, is a high-performance two-stage pHEMT MMIC low noise amplifier (LNA) designed for use from 0.8 to 4 GHz. This LNA provides low noise figure and high linearity in a gain block ...

VOC ZRO1751B1LF with typical phase noise feature available from RF Parts Australia (26/01/2009)

Z-Communications, represented by RF Parts Australia, have announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model ZRO1751B1LF in L- band. The VOC ZRO1751B1LF operates from 1748-1753 MHz with a tuning voltage ...

RoHS compliant VCO ZRO0833A1LF available from RF Parts Australia (23/01/2009)

Z-Communications, represented by RF Parts Australia, have announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model ZRO0833A1LF in UHF band. The VOC ZRO0833A1LF operates from 826-841 MHz with a tuning voltage ...

RoHS compliant VCO V230ME04-LF with ultra low phase noise feature available from RF Parts Australia (22/01/2009)

Z-Communications, represented by RF Parts Australia, have announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model V230ME04-LF in VHF band. The VOC V230ME04-LF operates from 226-233 MHz with a tuning voltage ...

VCO SMV5815A-LF with 2nd harmonic suppression feature available from RF Parts Australia (21/01/2009)

Z-Communications, represented by RF Parts Australia, have announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model SMV5815A-LF in C-band. The VOC SMV5815A-LF operates from 5790-5840 MHz with a tuning voltage ...

SMV1132A-LF voltage-controlled oscillator

New RoHS compliant VCO SMV1132A-LF from RF Parts Australia (20/01/2009)

Z-Communications, represented by RF Parts Australia, have announced a new RoHS compliant VCO (voltage-controlled oscillator) model SMV1132A-LF in L-band. The SMV1132A-LF operates from 1112-1152MHz with a tuning voltage range ...

New VCO CRO5100Z with better 2nd harmonic suppression available from RF Parts Australia (19/01/2009)

Z-Communications, represented by RF Parts Australia, have announced a new VCO (voltage-controlled oscillator) model CRO5100Z in C-band. The CRO5100Z operates from 5090-5110MHz with a tuning voltage range of 0.5-4.5VDC.

RoHS compliant VCO CRO2450B-LF available from RF Parts Australia (16/01/2009)

Z-Communications, represented by RF Parts Australia, have announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO2450B-LF in S-band. The CRO2450B-LF operates from 2445 to 2455MHz with a tuning voltage ...

TBC series of 2 stage noise filters available from RF Parts Australia (16/09/2008)

Cosel, represented by RF Parts Australia, have introduced the new TBC series of 2 stage noise filters available in current range of 50, 100 and 150(A).

TAC series of three phase noise filters from RF Parts Australia (15/09/2008)

Cosel, represented by RF Parts Australia, have introduced the TAC series of three phase, (1 stage) noise filters now available in higher current range of 50, 100 and 150(A).

Thermally enhanced gallium nitride devices available from RF Parts Australia (10/09/2008)

RFHIC, represented by RF Parts Australia, have announced the release of thermally enhanced gallium nitride devices such as RT233, RT240 and RT243 for applications from DC to 6 GHz.

DSB700 series DC/DC ‘Brick Type’ Power Supply from RF Parts Australia (4/09/2008)

Cosel, represented by RF Parts Australia, have introduced the DSB700 series DC/DC ‘Brick Type’ Power Supply with single output of 696 - 700 watts, input voltages of DC 200 - 400 volts and in voltage/amp ranges of 24, 28 ...

CLV1570B-LF Voltage-Controlled Oscillator from RF Parts Australia (8/07/2008)

Z Communications, represented by RF Parts Australia, has released RoHS compliant VCO (Voltage-Controlled Oscillator) model CLV1570B-LF in L-band.

CLV1370A-LF voltage controlled oscillator in L-band

Voltage controlled oscillator in L-band from RF Parts Australia (7/07/2008)

Z Communications, represented by RF Parts Australia, has introduced CLV1370A-LF, its new lead free, RoHS compliant voltage controlled oscillator in L-band.

Downconverter available from RF Parts Australia (3/07/2008)

RFMD, represented by RF Parts Australia, has released S510075-33Z, a new downconverter designed to be used as an out-of-band tuner for use in CATV set-top box and digital cableready TV applications.

Variable Data Rate FSK Transceiver ML5805

Single chip FSK Transceiver ML5805 from RF Parts Australia (25/06/2008)

RF Micro Devices (RFMD), represented by RF Parts Australia, has released a single chip fully integrated frequency shift keyed (FSK) transceiver, ML5805, which is developed for a variety of applications operating in the 5.725GHz ...

Low Passive Intermodulation adaptors from RF Parts Australia (12/06/2008)

RF Laboratories’ Low Passive Intermodulation adaptors, available from RF Parts Australia, are a cost effective solution for the telecommunications and other markets.

M/A-Com’s low noise amplifiers available from RF Parts Australia (29/04/2008)

M/A-Com, represented by RF Parts Australia, has introduced a family of ultra low noise amplifiers (LNA).

CLV1596A-LF voltage controlled oscillator available from RF Parts Australia (21/03/2008)

Z Communications, represented by RF Parts Australia, has introduced the lead free, RoHS compliant oscillator (CLV1596A-LF) in L-band (1507-1685MHz) featuring ultra low phase noise performance of -100dBc/Hz at10kHz offset.

V804ME18-LF voltage controlled oscillator from RF Parts Australia (20/03/2008)

Z Communications, represented by RF Parts Australia, has released V804ME18-LF, a lead free, RoHS compliant Voltage Controlled Oscillator (VCO) in S-band 2299-2477MHz for WiMAX and mobile communications applications.

V800ME17-LF voltage controlled oscillator available from RF Parts Australia (19/03/2008)

Z Communications, represented by RF Parts Australia, has unveiled lead free, RoHS compliant Voltage Controlled Oscillator (VCO) V800ME17-LF in S-band 2417-2596MHz.

RF Parts Australia presents V630ME41-LF voltage controlled oscillator (18/03/2008)

Z Communications, represented by RF Parts Australia, has introduced V630ME41-LF, the lead free, RoHS compliant Voltage Controlled Oscillator (VCO) in S-band 2154-2332MHz.

V610ME10-LF voltage controlled oscillator from RF Parts Australia (17/03/2008)

Z Communications, represented by RF Parts Australia, has released V610ME10-LF, an ideal lead free, RoHS compliant Voltage Controlled Oscillator (VCO) in S-band 2008-2186MHz.

CRO2935B-LF voltage controlled oscillator available from RF Parts Australia (14/03/2008)

Z-Communications, represented by RF Parts Australia, has unveiled RoHS compliant, coaxial resonator oscillator CRO2935B-LF in S band (2850-3020MHz) featuring ultra low phase noise performance of -109dBc/Hz at10kHz offset.

Heterojunction Bipolar transistor power amplifier from RF Parts Australia (13/03/2008)

RF Micro Devices, represented by RF Parts Australia, has released SPA-1526Z, a 2W, high linearity, single-stage, class A, Heterojunction Bipolar transistor (HBT) power amplifier.

RF Parts Australia offers CLV0910B-LF voltage controlled oscillator (13/03/2008)

Z-Communications, represented by RF Parts Australia, has introduced CLV0910B-LF, the lead free, RoHS compliant oscillator in UHF-band (890-930MHz).

HBT power amplifier from RF Parts Australia (12/03/2008)

RF Micro Devices, represented by RF Parts Australia, has released SPA-1426Z, a 1W, high linearity, single-stage, class A, Heterojunction Bipolar transistor (HBT) power amplifier.

New 40GHz termination P/N 4801-7001-02 from RF Parts Australia (6/03/2008)

XMA Corp, represented by RF Parts Australia, has announced its new 40GHz termination P/N 4801-7001-02.

New attenuator series from RF Parts Australia (5/03/2008)

XMA Corp, represented by RF Parts Australia, has announced the new 40GHz attenuator series 4882-6140-XX.

RF Parts Australia announces RF Micro Devices acquisition of Sirenza Microdevices (25/02/2008)

RF Parts Australia, as the official Australian/New Zealand distributor/ representative, has announced that RF Micro Devices has acquired Sirenza Microdevices.

Dual-band GSM/GPRS transmit module from RF Parts Australia (22/02/2008)

RF Micro Devices, represented by RF Parts Australia, has introduced RF4180 PowerStar dual-band GSM/GPRS transmit module.

Location solutions for GPS applications from RF Parts Australia (21/02/2008)

RF Micro Devices, represented by RF Parts Australia, has introduced RF8000 series of location solutions for global positioning system (GPS) applications.

Low noise amplifier available from RF Parts (18/02/2008)

M/A-Com, represented by RF Parts in Australia and New Zealand, has introduced the MAAM-007095-A3GVSA, a low noise amplifier, two-stage variable gain amplifier that is ideal for military and space radar, tactical communications ...

New power amplifier module from RF Parts Australia (14/01/2008)

RFMD, represented by RF Parts in Australia and New Zealand, has released the new RF3161, a high-power, high-efficiency power amplifier module with integrated power control that provides over 50 dB of control range.

New balanced low noise amplifier available from RF Parts (16/10/2007)

RF Parts has introduced the new balanced LNA-BL series from RFHIC covering frequency ranges of 800-1000MHz, 1900-2200MHz and 2200-2600MHz.

RF Parts launches a new toll free number (15/10/2007)

RF Parts Australia has launched a new toll free number.

New Power Amplifier module available from Australian Distributor RF Parts (28/08/2007)

RFW7735H20-28 is a wide band Power Amplifier module with operating frequency from 450MHz to 770MHz.

New DC/DC converter series available from Australian Distributor RF Parts (24/08/2007)

Cosel has introduced a new DC/DC converter series, the low profile SFLS10 / 15 / 30. The new DC/DC converter series is suitable for computer and communications equipment where the input source required is 48Vdc.

RF Parts distributes high performance E-pHEMT GaAs FET from RFHIC (23/08/2007)

RF Parts are the Australian Distributor for the new AE308 from RFHIC, a high performance E-pHEMT GaAs FET with a broad frequency range.

RF Parts Australian Distributor for new jammer amplifiers (23/08/2007)

RF Parts are the Australian distributor for the new RF Core jammer amplifiers in the 100 watt RCA series, covering frequencies 1805-1880MHz, 1930-990MHz, 2110-2170 MHz and 2400-2500 MHz.

RF386X series low noise amplifier available from RF Parts Australia (31/07/2007)

RFMD’s family of gallium arsenide (GaAs) pseudomorphic high electron mobility transistor (pHEMT) low-noise amplifiers (LNAs), the RF386X, offer capabilities from 700MHz to 3800MHz and provide the ideal combination of low ...

RF393X GaN wide-band power amplifier available from RF Parts Australia (30/07/2007)

RFMD introduces the RF393X family of 48V gallium nitride (GaN) power transistors.

New RFMD RF3822 broadband power amplifier available from RF Parts Australia (27/07/2007)

RFMD’s new power integrated circuit (PowerIC) broadband power amplifier (PA) operates over a wide range of microwave frequencies, making it ideal for multiple band and broadband applications.

P02S series 2 way Power Splitters available from RF Parts Australia (26/07/2007)

Temwell is a leading expert in the RF Field specialising in the design and manufacture of RF helical band pass filters, duplexers, power splitters and CATV combiners.

18GHz attenuator and termination from RF Parts Australia (23/07/2007)

XMA Corporation has introduced its low power, DFARS compliant, 18GHz attenuator and termination.

AE608 Amplifier from RF Parts Australia (20/07/2007)

AE608 is a Low Noise, High Linearity Amplifier of GaAs E-pHEMT basis with a low cost SOT-143 package.

AE608 E-pHEMT amplifier from RF Parts Australia (20/07/2007)

The AE608 E-pHEMT amplifier from RF Parts Australia is a low noise, high linearity amplifier of GaAs E-pHEMT basis with a low cost SOT-143 package.

New series cavity Triplexer available from RF Parts Australia (3/07/2007)

Microlab/FXR, a wholly owned subsidiary of Wireless Telecom Group, has released new cavity Triplexer to the line of Diplexers and Triplexers designed to meet the needs of the wireless market.

RFHIC components and subassemblies available from RF parts Australia (3/07/2007)

RFHIC is a manufacturer of components and subassemblies primarily for the RF and CATV markets and Microwave wireless.

New 4 way power divider available from RF Parts Australia (2/07/2007)

Microlab/FXR, a wholly owned subsidiary of Wireless Telecom Group has released new 4 way power divider for the broad band of 350 to 6,000 MHz.

New series high power attenuators available from RF Parts Australia (29/06/2007)

Microlab/FXR, a wholly owned subsidiary of Wireless Telecom Group., has released two new high power attenuators.

New series RF Hybrid component available from RF Parts Australia (28/06/2007)

RFHIC has launched their new series of RF Hybrid component, PLL Synthesiser with VCO and divider type (TCXO, ROM options).

New CE series power amplifiers available from RF Parts Australia (27/06/2007)

RFHIC introduces new CE series of 1 watt power amplifiers for PCS, IMT, Wibro and Wimax applications.

Wide range of Coaxial Attenuators available from RF Parts Australia (27/06/2007)

Microlab/FXR, a wholly owned subsidiary of Wireless Telecom Group has released a new range of Coaxial Attenuators.

New Diplexer available from RF Parts Australia (26/06/2007)

Microlab/FXR, a wholly owned subsidiary of Wireless Telecom Group, has released a low cost Diplexer, to separate or combine all the cellular wireless frequency bands from the WiMAX and WiFi bands above 3 GHz.

Microlab/FXR distribution agreement signed (21/09/2006)

RF Parts Australia recently signed a distribution agreement for Microlab/FXR covering their Wireless Group range of products.

Feed through filters (18/09/2006)

RF Laboratories (represented by RF Parts Australia) have released their feed through filter product range. Both solder mount and metric bushing mount are available.

Distribution agreement for RFHIC (8/09/2006)

RFHIC is a manufacturer of components and subassemblies primarily for the RF, microwave and CATV markets. A full range of components of include low noise, driver, wideband, CATV and power amplifiers, PLL synthesizers, up/down ...

High linearity power amplifier solution (10/08/2006)

RF Micro Devices (RFMD) has commenced mass production shipments of its RF3159 linear EDGE power amplifier (PA) to Samsung Electronics for use in at least 15 EDGE-enabled handsets. The RF3159 is a high linearity quad-band ...

Suitable for land-based microwave communications.

Semi rigid coaxial cable (6/09/2005)

RF Laboratories, represented by RF Parts Australia Pty Ltd, has released its semi rigid coaxial cable range. This range is available in tin plated or silver plated, covering impedances from 10W through to 100W in sizes from ...

HBT driver power amplifiers (9/08/2005)

RF Micro Devices, represented in Australia by RF Parts, has released the RF3800 series of GaAs HBT driver power amplifiers. These are rugged, cost-effective, multi-band platform devices suitable for base station infrastructure ...

Bluetooth/GPS solution (9/08/2005)

RF Micro Devices, represented in Australia by RF Parts, have launched a converged Bluetooth/GPS solution, the RF8900. This device permits anyone with a Bluetooth-enabled mobile phone or PDA to receive location-based services.

Output voltage options between 1.5V and 15V, up to 4.5A.

Surface mount and through hole dc-dc converters (2/08/2005)

COSEL, represented in Australia by RF Parts, has released the SFS-15 range of surface mount and through hole dc-dc converters with a 24V input.

Industry-standard lead-free, thermally enhanced, plastic SOIC-8 packages.

RF amplifiers (1/08/2005)

RF Micro Devices, represented in Australia by RF Parts, has developed a series of RF amplifiers for cellular base stations and other applications.

Output current is 100mA and a 1.0µF small capacitor is available.

Low drop out voltage regulator (29/07/2005)

NEW Japan Radio, represented in Australia by RF Parts, has released the NJM2831 low drop out regulator with on/off control.

Typical CW performance is 20dB gain and 35% drain efficiency at 2W (26V, 960MHz).

LDMOS field effect transistor (29/07/2005)

M/A-Com, represented in Australia by RF Parts, has released the MAPLST0810-002PP 2W, unmatched LDMOS field effect transistor, designed for use in GSM/EDGE applications.

Radio frequency linear driver amplifier (28/07/2005)

M/A-COM, represented by RF Parts, has released the PA2001 and PA2003 1 Watt and 2 Watt driver amplifiers for commercial base station and repeater infrastructure applications. They have a lower noise figure than traditional ...

Low power consumption, small size and a low total bill of materials cost.

Bluetooth module for mobile phones (28/07/2005)

RF Micro Devices, represented in Australia by RF Parts, has released an integrated SiW4000 Bluetooth system-on-chip (SoC) that provides faster data throughput, low power consumption, small size and a low total bill of materials ...

Built-in over-current, over-voltage and low-voltage circuits as well as a remote on/off alarm.

Dc–dc converters with synchronous rectifier circuit (27/07/2005)

COSEL, represented in Australia by RF Parts has added an input voltage range of 24V (18V – 36V) to its range of SFS-30 surface mount and through hole dc-dc converters.

Provided with an explanation of the AEC part numbering system.

High-Q, high-frequency capacitor kits (27/07/2005)

AMERICAN Electronic Ceramics, represented in Australia by RF Parts, offers six high-Q MLCC designer sample kits in either general purpose (GP) or ultra high frequency (UHF) NPO dielectrics.

Available in SOP, TSOP and TFBGA packages and lead free packages.

16M NOR Flash in .18mm technology (8/07/2005)

AMIC Technology, represented in Australia by RF Parts, has released the A29L160A, a 16M (1Mx16 / 2Mx8) NOR Flash with an operating voltage range from 2.7V to 3.6V, in 0.18mm technology.

High-density, low-cost read only memory storage.

128M MaskROM in 0.2mm technology (7/07/2005)

AMIC Technology, represented in Australia by RF Parts, has released the A23L3616 3V, 8M x 16 bit or 16M x 8 bit MaskROM in 0.2mm technology.

Integrated power detector for WCDMA handsets.

Linear power amplifier module (1/03/2005)

RF Micro Devices, represented by RF Parts Australia, has released the RF5198 high-power, high-efficiency linear power amplifier (PA) module for WCDMA handset applications. By incorporating a power detector on-chip it significantly ...

30% smaller than previous PowerStar modules.

Power amplifier modules (17/02/2005)

RF Micro Devices, represented by RF Parts Australia, has released two new PowerStar power amplifier (PA) modules. They measure 6mm x 6mm x 1.4mm, 30% smaller than previous PowerStar modules. They reduce complexity and streamline ...

RF Micro Devices expands shipments of Polaris Total Radio (16/12/2004)

RF Micro Devices, represented by RF Parts Australia, has announced volume production shipments of its Polaris 2 Total Radio GSM/GPRS/EDGE transceiver solution to Motorola for use in the recently introduced V551 and V547 ...

Single-chip Bluetooth component (30/09/2004)

RF Micro Devices has announced that Air2U is using its SiW3000 UltimateBlue single-chip Bluetooth component in its USB adapter.

RF Micro ships one billion power amps (31/08/2004)

RF Micro Devices has been recognised by industry analysts as the number one supplier of power amplifiers for mobiles. According to a May 2004 research report the company’s estimated market share is 41.6 percent.

RF Micro ships one billion power amps (4/08/2004)

Linear power amplifier modules for CDMA applications.

Linear power amplifier modules (22/04/2004)

RF Micro Devices has released linear power amplifier (PA) modules for CDMA applications, including 3V IS-95/CDMA 2000 1X handheld digital cellular equipment and spread-spectrum systems.

Linear power amplifier modules (19/04/2004)

RF Micro Devices has released a family of linear power amplifier (PA) modules for CDMA applications. They are available from RF Parts. The RF3163, RF3164 and RF3165 PA modules are manufactured with a gallium arsenide heterojunction ...

Transceiver solution for 802.11g applications (14/10/2003)

RF Micro Devices (RFMD) has announced the availability of its new wireless local area network (WLAN) transceiver solution for 802.11g applications. The 802.11g transceiver solution enables long battery life, superior range, ...

RSS Feed

News sign up |

Collapse Additional RF Parts Australia News

News sign up

The Australian Trellis Door Company installs expanding steel trellis doors at King Street Wharf, Darling Harbour (26/11/2009)

The Australian Trellis Door Company supplies and installs economical, expanding steel trellis doors and barriers to secure most commercial, retail, industrial and domestic applications.

Fixed and mobile trellis doors from ATDC

The Australian Trellis Door Company offers a range of steel trellis doors as an economic solution for securing shopping centre shop-fronts, kiosks and food court expanses. (18/11/2009)

The Australian Trellis Door Company offers both mobile trackless trellis barriers and fixed trellis door systems (with top track and optional bottom track).

mobile trackless trellis system from ATDC

Barriers from The Australian Trellis Door Company used for occupational health and safety (16/11/2009)

The Australian Trellis Door Company (ATDC) offers a range of steel trellis doors and barriers which are proving popular in solving many Occupational Health and Safety issues in manufacturing and construction environments.

Mobile trackless trellis barriers from The Australian Trellis Door Company

Barrier solutions to open air smoking provisions from The Australian Trellis Door Company (12/11/2009)

Venue operators have been putting significant effort and expense into improving their gardens and outdoor areas to accommodate the smokers. One relatively inexpensive product used by some of these venue operators to assist ...

Temperature Sensing in the Copper Industry (28/10/2009)

Correct temperature sensing strategies improve reliability, can help avoid costly repairs and save energy to reduce harmful CO2 emissions.

RSS Feed

News sign up

Sections

Mobile

Phones

Temperature Ranges

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.

Single chip, CMOS Bluetooth solution

More products from RF Parts Australia

Additional RF Parts Australia News

Related Articles

Sections