SI36 Orange PE Light Duty Protection Tape from Qualtape Australia has a hightack adhesive which will allow sticking to a combination of smooth and complex surfaces (e.g. window frames, sills, gutters, balustrades).
This light duty Protection task is not intended to be used as masking tape for edge delineation, but rather used for quick coverage of areas to be protected from render splatter. It can also be used for sticking to glazing and other surfaces needing protection.
Rendering or re-rendering of older buildings is an ideal application this product where there may be a larger amount of fixtures and fittings already in situ that need protection from splatter damage (e.g. security alarms, signs, fuse boxes, fire safety equipment).
Some important requirements for the application of this Light duty Protection Tape are:
- The greater the applying pressure, the better the adhesive will wet-out on the underlying substrate.
- Surfaces should be clean, dry and free from surface contaminants such as dust, oil and grease. Smoother surfaces mean easier application of tape.
- Pressure sensitive tapes should, ideally, be applied between 15º and 30º C. Problems may be encountered during periods of extremely high humidity or where close to the Dew Point and condensation is present.