Polex Environmental Engineering now offer a comprehensive range of modular reverse pulse cartridge filter dust collectors. The modular reverse pulse cartridge filter dust collectors share the same modular design as the bag filter series except that cartridge filters are used in place of the bag filters. The cartridges are considerably shorter than bag filters but with increased filter area which allows the overall height of the dust collector to be reduced for projects where there are height constraints.
Modular reverse pulse cartridge filter dust collectors are fabricated from folded galvanised sheet metal panels and supported by heavy duty box section steel. The support structure is hot dip galvanised for durability and long lasting corrosion protection.
The dust collector modules are made up of cartridge filters with a total of either 80 m2 to 112 m² filter area per module depending on the type of filter media used. The dust collector modules are connected using common panels, which both minimises the number of different components required and makes assembly very simple. Similarly, the support structure, screw feeder and airtank are modular and can be easily extended according to airflow requirements.
Various inlet configurations are available depending on the type of dust being filtered. The provision for explosion panels on the modular reverse pulse cartridge filter dust collectors is incorporated into the design of the panels and can be fitted at any time.