Pilz diplays new PSENcode safety switch - compact and safe from manipulation

By Pilz Australia

Got a Question for Pilz Australia?

Frank Schrever with the Pilz display of safety switch products at NMW 2009

Ferret caught up with Frank Schrever from Pilz at National Manufacturing Week Melbourne 2009 to discuss some of their new range of Pilz products on display at the show.

Schrever was keen to point out that with the current economic climate, and with Manufacturing being the second largest employer in Australia, not only were shows like National Manufacturing Week instrumental to Manufacturing in Australia, but that Ferret, as Australia’s leading online destination for the Manufacturing and Industrial industries is integral to the industries' ongoing growth and success.

Pilz took the opportunity to display their new PSENcode safety switches at National Manufacturing Week 2009. The new non-contact, coded safety switches PSEN cs3.1, PSEN cs4.1 and PSEN cs4.2 from Pilz expand the PSENcode product range, adding a new version which is significantly smaller – but offers the same level of manipulation protection.

All the coded safety switch functions are incorporated within the smallest space – 37mm x 26.4mm x 18mm – offering every benefit for a more flexible installation plus series connections with PSENslock safety gate systems and other switches in the PSENcode product range. The installation concept corresponds to the new generation of non-contact, magnetic safety switches PSENmag.

Benefits include:

Highest level of manipulation protection in the smallest space
Connected via a plug connection or with cable
Flexible cable outlet, including connector, so there’s no need for an angled connector
Flexible mounting, both the sensor and the actuator support every conceivable mounting configuration
10mm operating distance
Series connection possible in combination with the PSENslock and PSENcode

29/05/2009 12:00 AM

Got a question about this product

More information about this product

Contact Details

Send to a friend

Contact Pilz Australia

By sending this enquiry you will also be informed of other related opportunities.

First Name

Surname

* Your Name

So the supplier can address you personally

Phone

Will only be sent to the supplier, no one else

* Your Email

Will only be sent to the supplier, no one else

State

So you get the most relevant information

Personal Message

No Yes

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

* does not match

Send Enquiry

More products from Pilz Australia

Pilz Operator Display Terminals and Text Displays

Pilz has a comprehensive range of graphics operator terminals with the ability to display complex plant and machine cycles as per your requirements. The PMI (Pilz Machine Interface) provides the ideal, complete solution ...

Enquire Now

Pilz Three Dimensional Control and Monitoring

This futuristic "eye" developed by Pilz and DaimlerChrysler promises to allow people to work next to robots and other automated machines without physical safety barriers. The innovative "SafetyEYE®" is a safety-related ...

Enquire Now

Pilz - A Safe Open Field Bus

SafetyBUS p is a multi-master system with a linear bus topology based on the established CAN bus system. It is the first open, safe bus system to have been approved by BG to category 4 in accordance with EN 954-1, EN 60204, ...

Enquire Now

Pilz Programmable Safety Systems PSS®

The Pilz PSS-range of programmable safety systems, or safety PLC's offers significant advantages in terms of configuration, approval and operation. Software blocks that have been approved and encrypted by BG or TÜV are ...

Enquire Now

Pilz Safety Relays

PILZ PNOZ safety relays are the most widely used safety relays in the world and have proven themselves millions of times over in rugged everyday industrial environments. PILZ PNOZx comprises a large range of compact, ...

Enquire Now

Pilz Safety Sensors, Safety Switches Control and Signalling

Safety switches for monitoring the position of movable guards and approved for safety-related applications in conjunction with almost all the evaluation devices from the PNOZ X safety relay range. Approved for safety-related ...

Enquire Now

News sign up

Additional Pilz Australia News

Pilz Australia's Automation Sytem PSS4000 for control and visualisation tasks

Pilz announces the release of PSS4000, an Automation System for multiple control tasks (20/10/2009)

Pilz announces the release of PSS4000 a new innovative Automation System for open loop control, motion control and visualisation tasks

PNOZmulti has an integrated display for showing information and diagnostics.

PNOZmulti Configurator for PNOZmulti Mini & Co. (17/09/2009)

Pilz has expanded its range of hardware, but at the same time made sure that every automation function can be configured universally and uniformly with just one software package.

Metal lathes - can they be made safe? (19/08/2009)

Metal lathes spin at high speed – some at more than 6,000 rpm – and the item being fabricated can throw off hot, sharp pieces of metal.

Concepts for secure safety gate monitoring- The right sensor for every requirement (6/08/2009)

Increasing automation in mechanical engineering means that the demands on machine safety are also rising. Aspects of process safety, availability and cost-effectiveness must all be reconciled. Safety

Seize control of safety and productivity (18/06/2009)

It is about time the people responsible for machine safety and operation – engineers, electricians and integrators – quite literally took control.

PSS4000 automation suite with SafetyNET p devices available from Pilz Australia (3/06/2009)

With the all new PSS4000, Pilz Australia have launched a solution for all machine automation control and safety functions including motion control, diagnostics and visualisation. The primary aim of PS

PSS4000 automation systems available from Pilz Australia (2/06/2009)

PSS4000 automation system, available from Pilz Australia, is suitable for machine control and safety technology functions, including motion control, diagnostics and visualisation. The PSS4000 automati

Pilz Australia launch PSS4000 automation system and PAS4000 software suite (4/05/2009)

Pilz Australia safe automation have launched the PSS4000 automation system and PAS4000 software suite that provide a new way to design, programme and implement automation.

PSSuniversal modular I/O and control platforms available from Pilz Australia (21/04/2009)

PSSuniversal, available from Pilz Australia, is a decentralised, modular I/O and control platform that is economical for standard control functions and/or safety-related functions in mid-range and high-end automation projects. ...

Sandvik Mining and Construction and Pilz Australia develop PSS control systems for mining (16/04/2009)

A control system is normally found inside a control cabinet, where it is protected from all types of environmental influences. Control systems can also be installed on mobile machinery, where they may

Multifunctional PNOZsigma range of safety relays available from Pilz Australia (24/03/2009)

Pilz Australia will publish an easy-to-use checklist to help companies migrate from PNOZ classic safety relays to new slimline PNOZsigma models. Pilz Australia have developed the PNOZ X range, the PNOZelog range and the ...

Pilz Australia discuss importance of safety systems for increased productivity (19/03/2009)

According to Pilz Australia, safety measures that are worked into the design of the manufacturing plant boost productivity. The best safety systems make work easy and lines efficient at every stage from project planning ...

Machinery safety control systems from Pilz Australia (3/03/2009)

The maintenance engineers should beware of trying to save money by buying cheaper safety-related products. Pilz Australia discuss safety-related issues on using cheaper safety devices.

Servo amplifier PMCprotego DS with safety functions available from Pilz Australia (19/02/2009)

In the servo amplifier PMCprotego DS, from Pilz Australia, motion is monitored precisely where it arises. This means that reaction times are reduced considerably, which is a key factor for safety on h

PNOZsigma safety relays available from Pilz Australia (27/01/2009)

The PNOZsigma units/safety relays, available from Pilz Australia, save space and wiring costs, and reduce stockholdings.

The the PNOZmulti Configurator software package

PNOZmulti Configurator software package with user-centred enhancements available from Pilz Australia (20/01/2009)

Pilz, represented by Pilz Australia, are releasing version 6.0.0 of their Configurator tool for the PNOZmulti modular safety controller, with numerous enhancements and new features.

Plant Assessment services available from Pilz Australia (17/12/2008)

To help manufacturing companies prevent accidents and remain within the law, Pilz Australia offer a Plant Assessment service. Plant Assessments are conducted by Pilz consultants who possess a detailed knowledge of machinery ...

Pilz Australia launch fourth-generation PMI operator interfaces (8/12/2008)

Pilz Australia are launching the fourth-generation family of PMI operator interfaces that deliver better performance at favourable prices.

PSENslock interlocks from Pilz Australia (14/10/2008)

Pilz Australia are introducing an innovative interlock with a non-contact transponder for the switching function, and an electromagnet to hold the gate closed.

Safety card for servo amplifiers launched by Pilz Australia (13/10/2008)

Pilz Australia are launching a safety card for the servo amplifiers PMCprotego D, so that safety is integrated directly into the drive.

Decentralised I/O system PSSuniversal from Pilz (19/08/2008)

Pilz have now developed the decentralised I/O system PSSuniversal for connection to Profinet and Profinet safe. So now Profinet users can also take advantage of the system's benefits.

SafetyEYE safe camera system controlled the infeed area on a car door production line

Pilz Australia’s SafetyEYE safe camera system monitors KUKA's RoboTeam (11/07/2008)

KUKA's TecDays 2008 were held in Augsburg at the beginning of April and featured solutions, technologies and innovations for automation and production plants. In the demonstration, SafetyEYE, from Pilz Australia, monitored, ...

PMD s10 electronic monitoring relays from Pilz Australia (7/07/2008)

The new generation of PMDsigma electronic monitoring relays from Pilz Australia monitors values such as voltage, current, temperature or phase sequence.

Pilz Australia unveils new PNOZ safety relay PNOZmulti (3/06/2008)

Pilz Australia has introduced a new PNOZ safety relay called, PNOZmulti. The PNOZmulti can be used to monitor analogue input signals safely, such as current or voltage.

Pilz Australia unveils 3D safe vision system (2/06/2008)

There are two types of safe vision system available from Pilz Australia, namely, safe cameras (such as PSENvip) for press brake monitoring and safe 3D vision systems (such as SafetyEYE) for area monitoring.

Pilz Australia launches camera-based protection and measuring system PSENvip (30/05/2008)

When installed on the upper die of the press brake, PSENvip detects any foreign body in the protected field between the transmitter and receiver which may be up to 10m apart.

Pilz Australia unveils two modules for slimline PNOZsigma relays (30/05/2008)

When a PNOZ s7.1 is used either as a standalone unit or with a PNOZsigma base unit, further expansion is possible by connecting a maximum of ten PNOZ s7.2 modules, each having four normally-open safety contacts and one normally-closed ...

Pilz assists in ESPE certification (12/03/2008)

Companies using light curtains to safeguard machinery often do not appreciate the implications of the regulatory requirement for inspections.

Functional safety systems available from Pilz (11/03/2008)

Ron Bell explains functional safety and looks ahead to the revision of the IEC 61508 standard that is due for publication in 2010.

Risk assessment and CE marking services from Pilz Consulting (14/12/2007)

Pilz Consulting offers risk assessment and CE marking services.

PNOZmulti safety system from Pilz (13/12/2007)

The PNOZmulti safety system from Pilz has been specifically tailored for use with presses, regulating standard control functions and monitoring safety functions such as E-STOP, safety gate or two-hand controls.

Pilz Australia to launch PSENvip press brake solution (12/12/2007)

The new, camera-based protection and measuring system PSENvip to be launched by Pilz Australia uses an innovative optical system, parallel vision to monitor the whole bending process, enabling the operator to work more productively ...

PSSuniversal available from Pilz Australia (11/12/2007)

With the PSSuniversal, safety-related and/or standard control functions are performed decentrally at field level.

Pilz on EMC compliance for automation (10/12/2007)

A common problem encountered in modern automation is insufficient consideration given to EMC.

Pilz discusses safety requirements for packaging machines (7/12/2007)

The question, how much safety does a machine actually need, is easy to answer: The protection of man and machine must be guaranteed, as must the ability to design production processes individually.

Pilz Australia on emergency stop devices (6/12/2007)

There are a number of emergency stop devices that may be used on plant or machinery, the preferred form of device being a mushroom-type pushbutton, operable by palm.

Preventing the needless New Year death toll with safety during shutdowns (5/12/2007)

Death seems almost inevitable in the first few days of the New Year. WorkSafe Victoria statistics show at least one Victorian has died at work in the first week of January for the last five years.

Pilz Australia outlines different types of reset (5/12/2007)

When reading through documentation for safety monitoring devices, there are three different types of reset that may come up.

Pilz Australia on wiring switches in series (4/12/2007)

The question often asked of Pilz is can E-STOP’s or gate switches be wired in series to a safety control system? or words to that effect.

New version measuring system available from Pilz (30/11/2007)

The new, camera-based protection and measuring system PSENvip from Pilz uses an innovative optical system to monitor the whole bending process.

Pilz introduces SafetyEYE, a machine safety system (18/06/2007)

Pilz has introduced SafetyEYE, a machine safety system which has a high speed, dual CPU, image analysis computer and safety PLC fed images by three cameras analyses the area around hazardous machinery, responding whenever ...

Pilz and DaimlerChrysler unveils sight for robots (4/05/2007)

With SafetyEYE that was unveiled by Pilz and DaimlerChrysler, robots can see you coming and respond either slowing or stopping altogether while you pass by safely.

Safeguards at Australia's nuclear reactor world's best (27/10/2006)

No other Australian safety system faces the intense scrutiny focused on the country's nuclear reactor and, arguably, no Australian workplace takes safety more seriously. So, when the world's brilliant scientists use a new ...

Multi-functional compact safety relays (9/10/2006)

THE PNOZsigma range of compact safety relays from Pilz Safe Automation are multi-functional, have improved diagnostics, are easier to expand, and benefit from improved switching capacity. Included in the line-up is what ...

Fast diagnostics from safety controller (9/10/2006)

MACHINE operators and maintenance staff can benefit from better access to diagnostic data by connecting a Pilz PMI m107 machine interface directly to the PNOZmulti or the Programmable Safety System (PSS).

Pilz introduces new PNOZmulti modular safety controller (3/10/2006)

Even on its own, the Pilz PNOZmulti modular safety controller offers a good level of diagnostics via the front-panel LEDs and the facility for connecting a laptop PC via the PNOZmulti's serial port.

Announcing a new range of compact safety relays (28/09/2006)

The all-new PNOZsigma range of compact safety relays from Pilz Australia are multi-functional, have improved diagnostics, are easier to expand and benefit from improved switching capacity. Included in the line-up is what ...

Pilz safety system monitors wine paths (14/07/2006)

A silicone pig sweeps through the lines at Wolf Blass, entering a 'key station' where winery staff must choose one of 119 paths with all the precision of an air traffic controller. When it comes to safety, nothing has been ...

Pig tamed (10/07/2006)

Safety system monitors 119 wine paths at Wolf Blass.

New safety and control technology (7/07/2006)

NEW analogue I/O modules for the Pilz PSSuniversal decentralised control platform allow the transfer of process signals to suit burner management technology or sectors such as the process industry. Pilz says the PSSuniversal ...

Analogue modules for decentralised I/O platform (27/06/2006)

NEW analogue I/O modules for the Pilz PSSuniversal decentralised control platform allow the transfer of process signals to suit sectors such as the semiconductor industry or burner management technology. Pilz says the PSSuniversal ...

PNOZmulti now communicates via Ethernet.

Expansion modules for Pilz safety system (5/06/2006)

EXPANSION modules for data transfer via Ethernet are now available for the multifunctional safety system, PNOZmulti, which manages both standard control functions and safety functions economically.

PACE Zenith Awards 2006 (11/05/2006)

Metal Products Manufacturing Category - Finalists

Innovations that reduce electronic safety costs (3/04/2006)

PILZ Safe Automation will release two new products designed to substantially reduce the wiring requirements in electronic safety systems at National Manufacturing Week 2006, to be held at Sydney's Darling Harbour from May ...

Streamlined safety network (24/03/2006)

PILZ Safe Automation claims another world-first in its modular remote I/O safety system, the PSSuniversal. Eliminating the need for parallel operations and dedicated safety remote modules, PSSuniversal streamlines networking ...

Remote I/O safety system, PSSuniversal dovetails standard and safety control.

Safety networking savings and simplicity (22/03/2006)

TÜV approves Pilz for 61508 management (10/01/2006)

PILZ Safe Automation has won approval by European certification organisation TÜV for its management of key electrical safety system standard, IEC 61508. Awarded in November, the TÜV certification accredits Pilz's safety ...

TÜV approves Pilz for 61508 management (14/12/2005)

Pilz Safe Automation wins approval by TÜV for its management of electrical safety system standard, IEC 61508.

Press brake safety takes a leap forward (23/09/2005)

The evolution of the press brake from hydraulic to fully electric operation will make one of the metalworking industry's most useful yet most dangerous machines easier to safeguard. Frank Schrever* reports.

Software tool aids diagnostics and troubleshooting (14/09/2005)

PILZ Automation Technology is launching a new version of the PNOZmulti software for service operations. Compared with the fully featured Configurator, it is substantially cheaper to purchase a software licence for the new ...

Safety investment pays dividends (26/08/2005)

In just 14 months, the maker of Australian icon Blu Tack has invested between $1m and $1.5m on safety improvements at its Melbourne operations. Already, Bostik can see results. Marian MacDonald reports for Safety First.

A healthy approach pays profits (15/08/2005)

There are many ways in which paying attention to health and safety can pay dividends.

Ten safety switches can be connected in a series.

Non-contact coded safety switch (18/07/2005)

PILZ has released the PSENcode non-contact coded safety switch for safety gate monitoring. It satisfies Category 4 of AS4024.1 and the definite assignment of a switch and its counterpart makes it almost impossible to defeat ...

Entry is only allowed once an area is safe as indicated by a safety timer or safe standstill detector.

Mechanical safety switches (14/03/2005)

PILZ Safe Automation has released AS 4024.1 Category 4 mechanical safety switches that, when used with Pilz control systems, can prevent access until an area is safe. The PSENmech switches are also easy to install, connecting ...

Specialised safety at new Darwin fuel terminal (16/02/2005)

With up to 113 million litres of highly flammable fuels on site, the new Darwin Industry Fuel Terminal’s operators selected a highly specified Pilz Programmable Safety System to oversee a very basic yet critical device: ...

Just one of many new Pilz Safe Automation products for 2005.

Machine, automation safety one-stop shop (2/02/2005)

LEADING machinery and automation safety specialist, Pilz Safe Automation, will release at least six products at Safety In Action and Materials & Manual Handling from 21-23 March.

Why everyone's talking about safety (10/12/2004)

OCCUPATIONAL health and safety (OHS) seems to be on the lips of every engineer around the world today, and for good reason - the sheer number of work related deaths is still shocking, at an estimated 2,256,335 workers a ...

Laws, standards and approvals -- exploring the compliance jungle (9/12/2004)

When a machine is said to be ‘approved’ or meets a particular design standard, sometimes the claim is misleading or irrelevant, but may actually hint at a legal necessity. Sorting through the maze of compliance systems can ...

Productivity enhanced safety system (6/12/2004)

ONLY a safety system that enhances a line's productivity is truly safe, according to Pilz Safe Automation managing director Frank Schrever. In fact, says Frank, the best safety systems make work easier at every stage, from ...

Can control standard functions like driving pumps or fans.

System monitors safety systems and control functions (3/11/2004)

PILZ’ PNOZmulti safety system can now be used to control standard functions like driving pumps or fans.

Emergency stop pushbuttons (3/11/2004)

PILZ has released the PITestop range of emergency stop pushbuttons. A safety contact block prevents contact elements being released without detection

Diagnostic device finds faults (3/11/2004)

PILZ has released a diagnostic device that provides instructions on how to rectify faults as they are identified. This allows faults located using a Pilz programmable safety system (PSS) to be solved quickly.

Connects to DeviceNet, Interbus, CANopen and CC-Link as well as Profibus-DP.

Safety system that connects to standard fieldbus systems. (14/10/2004)

PILZ Safe Automation has released the PNOZmulti safety system that connects to standard fieldbus systems.

Safety systems and relays (3/09/2004)

SAFE automation control specialist, Pilz (Stand 2003) will demonstrate live, at QMAN, the resources needed to achieve safe machines.

Two interfaces for open bus system (14/05/2004)

PILZ has released two interfaces for the safe open bus system, SafetyBUS p.

Coded safety gate switches (12/05/2004)

PILZ has released a non-contact coded safety switch, PSENcode. It satisfies category 4 of AS4024.1. A fully coded version of the switch is also available for particularly demanding safety applications.

Efficiency makes safety work best (11/05/2004)

Only a safety system that enhances a line’s productivity is truly safe, according to Pilz Safe Automation.

Evolving needs of automation users addressed (11/05/2004)

Pilz Automation recently provided an update on its new products and strategies at its main German headquarters.

Fault finding made easy (27/04/2004)

THE diagnostic power of the PNOZmulti safety controller is now accessible using a PMIopen touch screen, with the release of a new PNOZ driver by Pilz Safe Automation. Written by InduSoft, the PNOZ driver enables users to ...

Speedy maintenance with standstill monitoring (27/04/2004)

SPEED and standstill monitoring on any scale can be managed easily with new equipment from Pilz. The safety specialist's new speed and standstill devices can monitor two axes independently under the direction of a PNOZmulti ...

Safety controller communications module (27/04/2004)

IT’S now easier to link the operation of a machine to the output of its safety devices, with the new mc3p communications module for the PNOZmulti safety controller. The software-configurable PNOZmulti can be linked to a ...

Safety system approved to IEC 61508 SIL 3 (19/04/2004)

PSS programmable safety system and modules used with a SafetyBUS p safety fieldbus network have received approval for applications up to SIL (safety integrity level) 3.

Safety relays and systems (12/02/2004)

PILZ will display its range of safety resources at the Safety in Action exhibition in Melbourne. The company will show its professional development, training, safe control circuit designs and safety control products.

Electronic two-hand safety control (22/07/2003)

THE world's first electronic two-hand control device for type IIIC in accordance with EN 574 is available from Pilz Australia. EN574, the European standard for machine safety relating to two hand control stations, defines ...

Safety relays with three outputs (6/05/2003)

TWO new compact Category 4 safety relays from Pilz offer three safe outputs and an auxiliary, making more of small spaces and simplifying the wiring of safety systems. The flexible Pilz PNOZ X2.7P and the PNOZ X2.8P safety ...

Category 4 compatible e-stop (29/04/2003)

A NEW emergency stop button, or E-stop, released by Pilz, combines several features for maximum safety at the operator level, making it suitable for Category 4 applications, and compliant with the occupational health and ...

PSEN safety switch -- protected against defeat.

New safety switch from Pilz (4/04/2003)

A NEW non-contact safety switch from Pilz with an 8mm switching distance is easier to install, copes with bouncing gates and meets international safety standards. The Pilz PSEN 2.2 non-contact safety switch is well protected ...

Pilz PNOZmulti safety relay voted winner of the Automation Award.

Safety relay wins automation award (17/01/2003)

VISITORS to the SPS/IPC/DRIVES fair in Nuremberg voted the new Pilz PNOZmulti safety relay the winner of the coveted Automation Award. The Pilz PNOZmulti was the most popular of ten products nominated for the award sponsored ...

Configuration of safety systems is as easy as

No programming with new safety relay (5/12/2002)

ANYONE can configure complex safety systems with just a mouse, using the soon to be released Pilz PNOZmulti safety relay. The new relay features a windows-style PC interface that allows users to simply "drag and drop" different ...

Programmable workplace safety systems (28/11/2002)

PILZ Australia is expanding its commitment to workplace safety with the launch of a new range of Programmable Safety Systems (PSS). Utilising new technology, the PSS is designed to improve operator safety by automatically ...

Pilz decentralised module -- suitable for Category 4 rated plant.

Category 4 safety made faster, simpler (19/11/2002)

SAFETY systems controlling large, complex machinery are now faster, simpler to implement and more cost effective. The Pilz PSS SB DI8OZ4 decentralised I/O module is suitable for Category 4 rated plant with several functions ...

No programming with new safety relay (1/11/2002)

WITH just a mouse, anyone can configure complex safety systems using the soon to be released Pilz PNOZmulti. The new Pilz PNOZmulti safety relay features a windows-style PC interface that allows users to simply "drag and ...

The PNOZelog safety relay covers all safety applications.

Electronic, wear-free safety engineering (8/10/2002)

WHEN the first PNOZ emergency stop safety relay was introduced on the market in 1987, it could not be foreseen that in a short space of time it would develop into an industry standard and its name become a synonym for safety ...

Multi-functional configurable safety relay (11/09/2002)

PILZ now offers a new solution which enables safe, economical control of plant and machinery. The new PNOZmulti is an economical solution for safety applications of medium complexity.

The new PMUT X1P muting controller from Pilz offers greater availability and safety through its integral ability to switch muting lamps automatically.

Light curtain muting controller (16/04/2002)

THE PMUT X1P muting controller from Pilz can be used with all types of light curtain muting sensors such as light barriers, proximity switches, inductive sensors and mechanical switches, irrespective of their make. A separate ...

Safe non-contact sensors for processors (12/04/2002)

Pilz Australia will present a new range of safe automation technologies at the National Manufacturing Week and at Automate trade exhibitions this year.

The Pilz PSS-programnmable safety system and SafetyBus p.

Automation safety on display (11/04/2002)

PILZ Australia will be showcasing a range of leading-edge safe automation technologies at two forthcoming exhibitions -- National Manufacturing Week (May 28-31, Sydney) and at Automate (Oct 15-18, Melbourne).

Safe way to switch heavy loads (16/01/2002)

PILZ has introduced PNOZpower, a new modular product family of safety relays with high breaking capacity. It consists of the basic PNOZ p1p unit for monitoring emergency stops, safety gates and light curtains in line with ...

Machinery risk assessment calculator (2/10/2001)

PILZ Australia, with Fortress Systems, has produced a simple pocket sized risk assessment calculator that makes it easy for assessment teams to determine the risk category of hazardous machinery and for engineers to then ...

RSS Feed

News sign up |

Collapse Additional Pilz Australia News

News sign up

Micrel G-PON Burst Mode Laser Driver with Limiting Amplifier (27/11/2009)

Micrel, represented in Australia by Soanar, has introduced the SY88236L/AL 2.5Gbps Laser Drivers with Integrated Limiting Amplifier.

Barden Hybrid can seaming roll bearings available from CGB Precision Products (27/11/2009)

Barden hybrid ceramic bearings demonstrate enhanced performance and reliability in this environment by combining the material properties of advanced corrosion resistant steels with those of ceramic balls.

Jokab Safety Relay RT9 from Products For Industry (27/11/2009)

Products for Industry install and distribute Jokab Safety Relay RT9. Safety Relay RT9 is a compact universal safety relay which can supervise both safety devices and the internal safety of machinery.

Modern automation technology reduces packaging costs (26/11/2009)

A further reduction of costs for plastic packaging by lowering packaging densities is hardly possible anymore.

P5 series pushbutton switch from Aerospace Defence Products (26/11/2009)

The rugged P5 series is an alternate action push "On", push "Off" push button switch with contoured dome styling.

RSS Feed

News sign up

Sections

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.

Pilz diplays new PSENcode safety switch - compact and safe from manipulation

More products from Pilz Australia

Additional Pilz Australia News

Related Articles

Sections