Pacific Sensor Technologies’ PAT-7021 water proof conductivity/TDS/salt/temperature pen tester measures conductivity, total dissolved solids, salt and temperature and eliminates the use of multiple instruments. Pacific Sensor Technologies’ PAT-7021 water proof conductivity/TDS/salt/temperature pen tester is suitable for the following industries:
- Chemical
- Semi-conductor
- Power generation
- Hospitals
- Textile
- Iron and steel
- Food and beverage
- Mining
- Electroplating
- Pulp and paper
- Petroleum and marine industries
Pacific Sensor Technologies’ PAT-7021 water proof conductivity/TDS/salt/temperature pen tester measures the level of electrical conductivity. Conductivity is used to determine the level of impurities in water supplies for domestic consumption and industrial use. Pacific Sensor Technologies’ PAT-7021 water proof conductivity/TDS/salt/temperature pen tester measures the level of Total dissolved solids (TDS) and takes measurement of Total Dissolved Solids (TDS) in mg/L, parts per million (ppm) or parts per thousand (ppt). The TDS concentration can be obtained by multiplying the conductivity value with a factor which is empirically determined.
Pacific Sensor Technologies’ PAT-7021 water proof conductivity/TDS/salt/temperature pen tester measures the level of salt. Salinity measurements are common in industries such as agriculture, aquaculture, hydroponics, food, pools and spas where it is necessary to monitor the salt level constantly. The values are usually read in parts per thousand (ppt) or % (1 ppt = 1 gram per litre). Pacific Sensor Technologies’ PAT-7021 water proof conductivity/TDS/salt/temperature pen tester has the following specifications:
- Microprocessor based for fast and accurate measurements
- Special viewing angle designed for waterproof housing IP 57 rated. It floats on water
- Large LCD displays conductivity or TDS, salinity, DO or FCL and temperature simultaneously
- Easy to calibrate by one keyboard
- Automatic Temperature Compensation (ATC) Manual Salinity (MSC) and Altitude (MAC) Compensation
- Multi-functions with data-hold, maximum/minimum and shows PTS after calibration
- Degrees are switchable
- Low battery and consumption indicator. Auto power shut off after 10 minutes of non use
- Easy to replace electrode module and the type of electrode would be recognised automatically and shown in display during insertion