PAT-7200 water proof pH/mV/conductivity/TDS/Salt/Temp pen tester will measure liquid’s acidity and alkalinity, potential of hydrogen commonly known as pH. pH is one of the most common parameter measured and tested in a variety of industries ranging from water and wastewater treatment, mining and mineral processing, environmental monitoring, chemical production, agriculture research and chemical production, life sciences research, biochemical and pharmaceutical research, electronics production to food processing.
Pacific Sensor Technologies , PAT-7200 water proof pen tester measures conductivity, total dissolved solids, salt and temperature taking away the need and expense to have multiple instruments. Pacific Sensor Technologies, PAT-7200 water proof pen tester is suited to the following industries: chemical, semi-conductor, power generation, hospitals, textile, iron and steel, food and beverage, mining, electroplating, pulp and paper, petroleum and marine industries.
Pacific Sensor Technologies, PAT-7200 water proof pen tester measures the level of electrical conductivity. Conductivity is used widely to determine the level of impurities in water supplies for domestic consumption as well as industrial use Pacific Sensor Technologies, PAT-7200 water proof pen tester measures the level of total dissolved solids (TDS) measurement of total dissolved solids (TDS) in mg/L, parts per million (ppm) or parts per thousand (ppt).
The TDS concentration can be obtained by multiplying the conductivity value with a factor, which is empirically determined Pacific Sensor Technologies, PAT-7200 Water proof pen tester measures the level of salt, salinity measurements are common in industries like agriculture, aquaculture, hydroponics, food, pools and spas where it is necessary to monitor the salt level constantly. The values are usually read in parts per thousand (ppt) or % (1 ppt = 1 gram per liter). Pacific Sensor Technologies, PAT-7200 Water proof pH/mV/conductivity/TDS/Salt/Temp pen tester has the following specifications
Special viewing angle designed of waterproof housing IP 57 rated. It floats on water
large LCD display conductivity or TDS or salinity and temperature simultaneously
simple to calibrate by one keyboard and automatic temperature compensation (ATC), manual salinity(MSC) and altitude(MAC) compensation multi-functions with data-hold, max/min and shows PTS after calibration.
Degree Celsius/Fahrenheit are switchable low battery consumption indicators. Auto power shut off after 10 minutes of non use easy to replace electrode module and the type of electrode would be recognised automatically and shown in display during insertion supplied as a complete kit with tester, electrodes, lanyard, solutions, calibration certificate and hard carry case.