Product Showcase


PCA - Plant Control and Automation
PO Box 121
Hornsby NSW 2077
Tel: 02 9482 3733
Fax: 02 9476 6822

Supplier´s Website
Enquire now

Incorrect details?

close

Enquire NowVisit Website

The Incremental Encoder Simulator


Product/Service Name

The Incremental Encoder Simulator from PCA - Plant Control and Automation



Incremental Encoder Simulator

The Incremental Encoder Simulator is designed to simulate the function of most types of incremental encoders.

The user can control the exact number of square wave signals applied to the device’s output. This allows the engineer to control the input pulses generated down to just one pulse, so the user can monitor in slow motion the operation of a control system.

Access to the instrument is through a standard nine pin D type plug, whereby the user simply connects the simulator to the terminals or plug of their control system.

The instrument’s power is taken from the control system. It will operate on any voltage from 5V to 30V100mA DC.

Control panel features include:

• LCD display panel with 2 x 16 character, 5.5mm x 3mm

• RPM: displays the speed of the output encoder - this is determined by the time taken for each "shaft" rotation

• MODE: this states the current mode of operation for the programming switches in the panel

• PPR: displays the number of pulses for one rotation of the simulated shaft encoder that has been programmed into the instrument or it displays the number of increment pulses between each zero pulse

• Count progress: this is used when in MAN mode so that the user can see the number of signals that have been transmitted to the output

• Frequency: displays the frequency of the output signals

Operator programming buttons consist of:

• Mode selection: the red LED at the top of each column shows the function, which is applied to the four programming buttons on the left side of the operator control panel. The two select buttons below this function change the selection from one mode to the next.

• PPR mode: to set up the pulses of the encoder to be simulated. The results of the following setting process are shown in the PPR display: Start - resets the PPR display to 2 and allows the new selection process to begin; Select - increments the right digit under the PPR display by 1 each time the button is pressed.

Click here for more information about this product

Contact PCA - Plant Control and Automation

Name:
Company Name:
Contact Number:
Email Address:
Your State:
Your Message:

Please uncheck this box if you don't want to receive the latest product updates in Ferret Daily Product News, Ferret's daily eNewsletter.

does not match
 
Your contact details will be passed onto this company ( see our Privacy Policy )
More News

PCA - Plant Control and Automation News


Incremental Encoder Simulator Incremental Encoder Simulator (20-Jul-2006)
THE Incremental Encoder Simulator is designed to simulate the function of most types of incremental encoders. Available from PCA- Plant Control and Automation P/L, this instrument allows the engineer to fully test a control system that uses a rotary or linear shaft encoder, without the need for any mechanical movement.

Features two encoder inputs. Position Counter and Differential Counter with two encoder inputs (3-May-2006)
PCA – Plant Control and Automation has released a high speed Position Counter and Differential Counter with two encoder inputs. Features include: electronic counter for high-end applications and choice of 6-decade display.

Universal 8-channel splitter for incremental encoder signals Universal 8-channel splitter for incremental encoder signals (1-May-2006)
THE GV 470 has been designed to distribute the impulse signals of an incremental encoder or measuring system to up to eight target units. Available from PCA – Plant Control and Automation, the encoder input is switch-selectable for operation with either standard RS422 signals or with HTL (24V) signals.

Trouble-free splitting of one encoder signal to several target units. Impulse amplifiers, impulse distributors and encoder-splitters (3-Feb-2006)
MKS, represented in Australia by Plant Control and Automation (PCA), has released a series of units designed for amplification, distribution, and splitting of incremental encoder signals.

The TX720 provides CANopen and serial RS232/485 interfaces for communication with a number of target devices. Fieldbus modules and gateways for PROFIBUS and CANBUS (2-Feb-2006)
MKS, represented in Australia by Plant Control Automation (PCA), has released a range of fieldbus modules and gateways suited to PROFIBUS and CANBUS.

News Sign up View all  |  RSS Feed

Explore Similar Sections
[ View all ]
Ferret Newsletter
Be the first to know about new products and developments. Sign up for Ferret's daily newsletter.

About Ferretmore
  • Contains over 8,000 manufacturing and industrial directory topics
  • 250 new products are listed each week
  • Supplies companies on average with 3000 leads and 100,000 website referrals each month

Add My Business
More Products
Industrial Control Modules - Encoder Interface And Measurement

Industrial Control Modules - Encoder Interface And Measurement

The MKS range of modules provided a connivent method of interfacing a wide range of process information.with analogue inputs. for position, event, summing ...

Incremental Shaft Encoders - Australian assembled.

Incremental Shaft Encoders - Australian assembled.

Encoders are used in most modern machinery. We assemble most incremental encoders sold in Australia but, in addition, we have many other styles with ...

Angle Measuring Systems - Inclinometers from PCA Plant Control and Automation

Angle Measuring Systems - Inclinometers from PCA Plant Control and Automation

Mobile Equipment Earthmoving Machinery Cranes and Hoists Drilling Equipment  Inclinometers are a valuable device for measuring the angle of equipment ...

Access over 2000 Manufacturing and Operations jobs online!