P Thomas Electronics
17 Windsor Street
Richmond NSW 2753
Tel: 02 4578 9611
Fax: 02 4578 9622

Supplier´s Website
Enquire now

Incorrect details?

close

Enquire NowVisit Website

Contact Details

New programmable sequencer for dust collectors

IN reverse jet pulse dust collectors, the ST10AC sequencer is designed to operate the pilot valves.

Available from P Thomas Electronics , it directly replaces the well-known PT10 timer. There are new features added to control the dust collector.

This low cost controller is easily programmed and all input and output functions are indicated by LEDs.

Features include:

* Code protection

* 10 outputs (up to 50 outputs with EXT.board)

* Incremental or arbitrary sequence to energise pilot valves

* On time: 10ms to 990ms

* Off time: 1s to 999s

* Off time 2: 1s to 999s

* Clean up: up to 255 cycles

Inputs include:

* Aux. input

* Fast cycle for faster cleaning

* D.P. switch (diff. pressure) interrupt

* D.P. switch (diff. pressure) full cycle

* Input voltage: 110 to 240VAC (other voltages are available)

Outputs include:

* Plug in output terminals to pilot solenoid valves

* Relay alarm (output) to indicate operational function of controller or running feedback

* Output voltage: 110 to 240VAC (other voltages are available)

All input and output connections are made by plug-in terminals to save time and avoid wrong wiring at the maintenance level. Enclosure is available on request.

The ST10AC dimensions are 250mm long, 150mm wide and 70mm high.

P Thomas Electronics News

Abrasive Blasting Control systems from P Thomas Electronics (24-Jan-2008)
P Thomas Electronics has built comprehensive Abrasive Blasting Control systems using microprocessor technology to sequentially start and stop various plant components in a predetermined way.

Programmable timers for dust collectors (9-Dec-2005)
P Thomas Electronics design and manufacture a large range of electronic programmable timers for industries requiring air filtration and dust collection. They provide electronic adjustable or programmable timer products for dust collection systems.

Dust collection control systems (8-Dec-2005)
P Thomas Electronics designs and manufactures a range of dust collection control systems. There are two main types: A multi-valve pulsing unit for Reverse Jet dust collectors; A shaker timer control unit.

RSS Feed

Related Articles

Gold Series cartridge dust and fume collectors available from Camfil Farr Australia (1-Dec-2008)
The Gold Series cartridge dust and fume collector available from Camfil Farr Australia may be used for a wide range of pollution control and product recovery applications. The Gold Series cartridge dust and fume collector features Gold Cone in the center of the cartridge, which cleans by pulse waves that emanate outward from this inner cone.

Sweed Model 300 strap chopper for POG recycling available from Australian Warehouse Solutions (27-Nov-2008)
The Sweed Model 300 strap chopper from Australian Warehouse Solutions is a tough, economical chopper that is ideal for point of generation (POG) recycling. POG recycling increases worker safety and reduces handling of strap.

DC-Micromotor Type 0615 and Planetary Gearhead Type 06/1 available from Erntec (25-Nov-2008)
The ironless DC-Micromotor, Type 0615 measures 6mm in diametre, 15mm in length and weighs 2g. It is available from Erntec. The DC-Micromotors are available in nominal voltages of 1.5, 3 and 4.5VDC, with no-load speeds of 19,900 rpm, stall torque of 0,23mNm and output power of 0.12watt.

The MCBSTM32E Evaluation Board and Starter Kit from Embedded Logic Solutions (24-Nov-2008)
Keil extends its support for ARM Cortex-M3 processor-based devices with the introduction of the MCBSTM32E Evaluation Board and Starter Kit.

The Fromm A380 for strapping applications available from Australian Warehouse Solutions (20-Nov-2008)
The Fromm A380 from Australian Warehouse Solutions (AWS) is a high performance steel strapping tool for demanding strapping applications in the wood, steel and metal industries. The A380 steel strapping tool is built tough to outlast the harsh conditions of continuous or shift operations.