Nepean Group design special purpose machines

Following are machines designed by Nepean Group for their clients:

BTR Automotive:

• Pinion nut torque machine - To tighten the nut for diff pinion and checking/setting the preload on the pinion bearing
• Hydrostat torque tester - To check the torque of hydrostat
• Dual ram axle press - To press bearing and retainer and monitor the pressing loads
• Carousel wash - To wash the diff carrier and its components
• Tunnel wash - To wash the carrier pallets

TRW Austrailia:

• Station-1 - To assemble main parts of power steering assembly
• Station-2 - To assemble the sleeve valve assembly in the power steering
• Station-3 - To assemble bearings and seals in power steering body
• Rack Mill & Drill - Multi Axes CNC machine to mill and drill the power steering rack

South Corp:

• Heater body press - For punching and pressing holes in a heater body

SC Johnson:

• Air freshners sleeving machine - For packaging of air freshners

Nepean Meco Conveyors:

• Tube cutter - For chipless cutting of conveyor rollers to required length
• Tube borer - For boring the ends of conveyor rollers
• Tube welder - To weld the bearing housings in the conveyor tubes
• Cartridge machine - To assemble bearings and seals and filling grease in conveyor roller housings

TriStar Steering & Suspension:

• Multihead drilling machine - For drilling holes at different angles in power steering sleeve

Spicer Axle Australia:

• Pinion Measure & Press - For calibration and measurement of pinion/bearing and press
• Dana Automotive Group Australia:
• Tone wheel press & gauging machine - To assemble tone wheel and check run out
• Axle Press (servo driven) - To press bearing and retainer and monitor the pressing loads with auto feed of retainers
• Electric toe grinder - To debur the toe of crown gear

Nepean Plastic:

• Seal assembly machine - To assemble seals and fill grease in seal assembly