- WLS-9211 (4-channel, 14 S/s, 24-bit, ±80 mV thermocouple input)
- WLS-9215 (4-channel, 100 kS/s/ch, 16-bit, ±10 V analog input)
- WLS-9219 (4-channel, 100 S/s/ch, 24-bit, ±60 V, ±25 mA universal input)
- WLS-9234 (4-channel, 51.2 kS/s/ch, 24-bit, ±5 V IEPE input)
- WLS-9237 (4-channel, 50 kS/s/ch, 24-bit, ±25 mV/V bridge and strain input)
NI Ethernet Data Acquisition
- Use widespread Ethernet network infrastructure for remote measurements
- Stream data on each measurement channel at more than 50 kS/s with 24 bits of resolution
- Simplify remote monitoring with NI LabVIEW and direct sensor connectivity
- Seamlessly integrate distributed measurements into existing systems
- Save setup and development time with NI-DAQmx measurement services software
Modules Available
- ENET-9211 (4-channel, 14 S/s, 24-bit, ±80 mV thermocouple input)
- ENET-9215 (4-channel, 100 kS/s/ch, 16-bit, ±10 V analog input)
- ENET-9219 (4-channel, 100 S/s/ch, 24-bit, ±60 V, ±25 mA universal input)
- ENET-9234 (4-channel, 51.2 kS/s/ch, 24-bit, ±5 V IEPE input)
- ENET-9237 (4-channel, 50 kS/s/ch, 24-bit, ±25 mV/V bridge and strain input)
National Instruments Wi-Fi data acquisition (DAQ) devices combine IEEE 802.11 wireless or Ethernet communication, direct sensor connectivity, and the flexibility of NI LabVIEW software for remote monitoring of electrical, physical, mechanical, and acoustical signals.
With built in signal conditioning and the highest commercially available network security, NI Wi-Fi DAQ devices stream data in real time for easy to use, high performance remote measurements.
For more information on our W-Fi and Ethernet Data Acquisition products, please visit our website.