National Instruments has released PXI source measure unit (SMU) and high density PXI switches.
These products further enhance the PXI platform for use in precision DC applications, such as semiconductor parametric tests and electronic device and component validation.
Engineers can use these modules together to precisely characterise voltage and current parameters on high pin-count devices, with the advantages of smaller size and lower cost compared to traditional approaches.
The NI PXI-4130 power SMU is a programmable, flexible, high-power 3U PXI module suited for precision DC applications.
The NI PXI-4130 power SMU features a single isolated SMU channel with a four-quadrant ±20 V output that incorporates remote four-wire sense. This channel can source up to 40W in quadrants I and III and sink up to 10W in quadrants II and IV.
The PXI-4130 SMU has an additional power supply channel for voltage and current source and readback, combining an SMU with a power supply on a single PXI module.
With five available current ranges offering measurement resolution down to 1 nA, the PXI-4130 SMU is a precise and accurate instrument suited for test and design validation applications that require programmatic sourcing and sweeping of voltages and currents.
“It has been interesting to see new innovations in analog and FPGA-based architectures result in exceptional performance in a drastically smaller size,” said Ken Reindel, director of measurement technology for National Instruments.
“The NI PXI-4130 power SMU represents an excellent mixture of precision, power and compact size that enables engineers to apply the benefits of PXI to new applications.”
The NI PXI-2535 and PXI-2536 high-density modules offer 544 crosspoints, a huge matrix density available for a single 3U PXI slot.
The PXI-2535 is configured as a 4x136 one-wire matrix and the NI PXI-2536 is configured as an 8x68 one-wire matrix.
The switch modules are built on field effect transistor (FET) technology, which offers new benefits including long mechanical lifetime, several simultaneous connections and switching speeds as high as 50,000 crosspoints per second.
These features make the switches a cost-effective solution for routing low-power DC signals when validating and testing mass-produced devices such as semiconductor chips. Engineers can use the new switches with NI Switch Executive switch management software for simple configuration and code reuse.
The SMU and high-density switches complement the numerous PXI instruments that engineers can use for semiconductor device validation including high-speed digital devices, mixed signal instruments and RF equipment.
When combined in a PXI system, these instruments can create a highly flexible solution for both structural and functional semiconductor validation as well as general electronic component characterization.
These products also work with NI TestStand test management software, the NI LabVIEW graphical development environment, NI SignalExpress, NI LabWindows/CVI and NI Measurement Studio.