Home > Ruland shaft collars

Ruland shaft collars

Supplier News
article image Ruland shaft collars hold tight face tolerance.

SHAFT collars are widely used components in the power transmission industry. They function as mechanical stops, clamps often used on split hubs, bearing faces and as a means for locating components on a variety of equipment including motors, gearboxes, linear actuators, packaging equipment, printing presses, medical devices, and measuring instruments.

Available through Naismith Engineering , shaft collars from Ruland are single point faced to ensure a high level of face to bore perpendicularity. The result is face runout of TIR <.05mm on standard collars with even tighter tolerance on bearing locknuts and special designs.

A precise shaft collar face to bore relationship is important for many applications. It ensures that components are both properly positioned and not tilted on the shaft.

Collar face perpendicularity also ensures even pressure on interfaced components. Uneven pressure can result in premature failure of components such as bearings.

When shaft collars are subject to shock loads, precise facing reduces the likelihood that the position of the collar will be shifted. A circular groove indicates the precision face on Ruland shaft collars.

The collars should be installed so that the groove is on the side that will receive shock loads or is against components needing precise positioning or even pressure.

Ruland offers shaft collars in aluminium, black oxide carbon steel and stainless steel, as well as engineered plastic collars. One and two-piece clamp-style designs are available with bore sizes from 3mm to 80mm in the metric series and from 1/8" to 6" in the inch series.

Clamp-style shaft collars do not mar the shaft like traditional set-screw types. Clamp-style collars also have higher holding power because they wrap around the shaft when tightened thus applying compressive stress nearly uniformly on the circumference of the shaft.

Two-piece clamp-style collars have an additional advantage since they can be installed on the shaft without removing other components. Ruland uses forged socket hardware in all its shaft collars, which allows for higher screw torque and increased holding power.

Shaft collars are part of Ruland's complete product line which also includes rigid couplings with precision honed bores and five types of zero-backlash motion control couplings: beam couplings, bellows couplings, oldham couplings, miniature disc couplings and curved jaw couplings.

Newsletter sign-up

The latest products and news delivered to your inbox