Metromatics presents GE Fanuc Embedded Systems’ CT11, CP11 and CR11 6U CompactPCI CPU boards with integrated dual core Intel processing technology. These versions are available with the Core2 Duo processor, the Core Duo processor and the Celeron M processor.
The 6U CompactPCI SBCs offer Core2 Duo processor features:
· Choice of Intel Core Duo or Intel Core2 Duo processor
· Dual gigabit ethernet PICMG 2.16 channels, up to 4 GBytes memory
· Rugged CR11 option available
The new family supports both 32- and 64-bit processor architecture, and is designed to meet the exacting requirements of commercial, telecommunications and military/aerospace organisations, with specific applicability to simulation/training and test/measurement. All three are designed to operate in a temperature range of -40°C to +75°C (depending on configured options), with the CR11 being optionally available as a rugged version with stiffener bars and wedge locks or in conduction-cooled form. All three boards are PICMG 2.1 compliant for hot swap capability.
The CR11 rugged single board computer provides a unique feature set, including 4 GBytes of soldered DDR2 SDRAM with enhanced ECC for increased reliability; two 10/100/1000 BaseT gigabit ethernet ports; flash drive or local UDMA100 2.5” hard disk; two SATA channels with RAID 0/1 capability; high performance 2D and 3D graphics acceleration with 32 MBytes memory and front/rear VGA and rear DVI-I up to 1,280 x 1,024 resolution; audio capability; two PMC sites (a PCIExpress XMC interface is available on request in place of one of the PMC sites); two serial ports; and four USB 2.0 ports. The CR11 also features four independent on-board PCI buses. It is RoHS compliant, and supported operating systems are Windows, Linux and VxWorks. Integrity is available on request.
Intel’s IPMI (Intelligent Platform Management) Interface is supported on the CT11, which otherwise provides the same functionality as the CR11, but for non-rugged applications.
The CP11 delivers the same feature set as the CT11, but is a dual slot version, allowing for two PMC slots as well as on board hard disk/CompactFlash working in parallel, together with all possible front I/O functions.