Home > Drexelbrook VeriGap ultrasonic gap switches available from Measurement Solutions

Drexelbrook VeriGap ultrasonic gap switches available from Measurement Solutions

Supplier News
article image VeriGap ultrasonic gap switch

The Drexelbrook VeriGAP ultrasonic gap switch, available from Measurement Solutions , is the only safe gap switch available for high level alarming or indication. With most low-level fail-safe devices, either an absence of material or a component failure will indicate a low level alarm. With most high level fail-safe devices, the presence of material will only trigger an alarm if the system is functioning properly. A component failure, such as separation of the crystals, will cause the device to indicate an absence of material. This will result in a normal condition, even if the tank is over filling.

The Drexelbrook VeriGAP ultrasonic gap switch overcomes the problems inherent in generic gap switches by testing the entire system (crystals, crystal bonding, electronics and relay) on demand, eliminating the possibility of a spill.

The Drexelbrook VeriGAP Ultrasonic gap switch requires no calibration. This eliminates the potential for error or spills during installation and setup.

The Drexelbrook VeriGAP ultrasonic gap switch is suitable for high and low point level measurements in liquids. It is not affected by variations in viscosity, density, pressure, temperature, or electrical properties.

Newsletter sign-up

The latest products and news delivered to your inbox