DrexelbrookCote-Shield circuitry ensures detection irrespective of conductive coatings or product build-up on the sensor.
Drexelbrook Clear Line 506-7100 in-line fluid detector is available from Measurement Solutions . It has the following benefits:
- Easy to install
- Mounts directly into existing pipelines between two standard 150-lb. flat-faced flanges
- Simple operation
The Drexelbrook’s Clear Line 506-7100 in-line fluid detector is factory calibrated and does not need field adjustments, even with variations in product temperature, density or conductivity. It does not require maintenance.
The Drexelbrook’s Clear Line 506-7100 in-line fluid detector is suitable for low level/interface detection. The Drexelbrook Clear Line 506-7100 in-line fluid detector is suitable for empty pipe and tank applications in pharmaceutical, chemical and food processing facilities.
It monitors the presence or absence of fluids in a pipe to assure that the tank is empty. It can also be used for interface detection to accurately determine when material changes from one phase to another. This is especially useful in processes involving materials separation.
The Drexelbrook Clear Line 506-7100 in-line fluid detector is suitable for shear-sensitive products. The sanitary, crevice-free design of Drexelbrook’s Clear Line 506-7100 in-line fluid detector can eliminate cracks or crevices and the ultra-smooth surface is suitable for shear-sensitive products.
The Drexelbrook Clear Line 506-7100 in-line fluid detector is easily mounted between flat-faced flanges and does not interfere with product flow.
It does not require recalibration. Each Drexelbrook Clear Line 506-7100 in-line fluid detector is factory-calibrated to provide reliable, repeatable performance irrespective of changes in process fluids and coatings, or variations in temperature, conductivity and density. It works without recalibration on processes where fluids can vary from organics to caustics.The Drexelbrook Clear Line 506-7100 in-line fluid detector is available with a NEMA 4 housing. Relay contacts (5A DPDT) can be used to switch optional alarm lights and provide contact closure for other functions.