The Drexelbrook CM6 cut monitor, available from Measurement Solutions , is built upon Drexelbrook’s expertise in RF Admittance that allows the electronics to ignore paraffin buildup on the pipe and probe. When maintenance does become necessary, users can simply pull the probe, wipe down and re-insert. There is no need to take apart spool pieces and tie-off large pipelines. The Drexelbrook CM6 cut monitor can be configured for any size NPT or flanged mounting and can be installed in any pipe diameter.
All Drexelbrook CM6 products come from the factory pre-calibrated and require only one point calibration trim. Field calibration can be done from anywhere along the two-wire loop with Drexelbrook HART software, or calibrate through local display/keypad without the need for laptop or handheld communicators.
Drexelbrook Perm-A-Seal sensing element does not require epoxy coatings that wear out and require expensive servicing. There are no gaskets that require servicing and the sensing element will not wear in well fluids that include large amounts of sand.
The Drexelbrook CM6 cut monitor comes factory pre-calibrated to one of 11 pre-set ranges.
The patented Cote-Shield is designed into the Drexelbrook CM6 series and enables the instrument to ignore a pre-determined length of the sensing element. The ability to ignore a pre-determined length allows the sensing element to extend into the fluid beyond the nozzle mounting, and possible pipe elbows, which can affect the measurement. The Cote-Shield puts the sensing area of the insertion probe directly into the process stream and guarantees a more representative sample of the emulsion.
The Drexelbrook CM6 cut monitor is used for the following applications:
- B.S. and W
- Automatic Well Testing (AWT)
- Separation Vessels
- Truck Unloading
- Lease Automatic Custody Transfer (LACT)
- Pipeline Slug Detection
- Pump Protection
- Dielectric Analysis
- Machinery Lube Oil Monitoring