Home > Maxon RE motors from Maxon Motor Australia drive hybrid robots

Maxon RE motors from Maxon Motor Australia drive hybrid robots

Supplier News

Chico Mendes, the latest environmental robot, is designed and built by Petrobras, a Brazilian energy firm. Standing 1.20 meters tall, with four agile legs and outstanding analytical skills, the robot is perfectly equipped to cope with life in the Amazon rain forest. Chico Mendes can be used in the most inhospitable surroundings. The hybrid robot wheels use Maxon RE motors from Maxon Motor Australia .

In developing Chico Mendes, particular attention was paid to make the hybrid robot adapt to the rainforest landscape, minimize any damage to the nature it is supposed to be protecting. Such specifications posed a particularly difficult challenge in drive technology terms.

Chico Mendes has to battle through mud, water and swamps with the help of electric microdrives. This involves eight of maxon motor’s DC motors with a long service life and deliver a high performance in a tiny space. Apart from the above characteristics, their low energy consumption is another important reason why maxon DC motors were chosen for the Piatam project. The environmental robots are driven by solar power in an initial phase. With an efficiency of over 90%, maxon’s motors are ideallysuited to this type of application.

Maxon RE 40 motors feature in all four of the robot’s wheels. The wheels are made of fiber glass and measure 66 centimetres in diameter. Another four maxon RE 35 motors are housed in the adaptive suspension, and automatically adapt to conditions depending on the terrain and water conditions in the rain forest. Two planetary gearheads, measuring 42 and 52 millimeter across, provide the requisite torque for the vehicle which is 1.5 meters long, 2.2 meters wide and 1.2 meters high.

The environmental robot's high dynamism requires dynamic electronics to control the DC motors. All operating DC motors are controlled using maxon motor's digital positioning controller EPOS 70/10. EPOS stands for “easy-to-use positioning system”. All EPOS controllers can be networked according to CANopen standards. The drives are programmed according to IEC 61131-3 standard using a simple software tool with graphic user interface.

Newsletter sign-up

The latest products and news delivered to your inbox