Home > Beading and flanging machines

Beading and flanging machines

Supplier News
article image

Advanced Sheetmetal Technologies has introduced to Australia and New Zealand, a range of beading and flanging machines that will suit the high output requirements of many industries, particularly suppliers of pipe, ducting and panels to the roofing and air-conditioning sectors.

The Prinzing range of machines is supplied in several groups of models, and can perform a variety of functions including beating, flanging, seaming and crimping.

Models, SM50, S. M. and 63, SME50, SME63:

This group of machines has a modern construction with shafts in precision bearings, and allows a quick set-up and positive adjustment of the upper shaft.

Allowing a quick adjustment of the backplate on the lower roll pipe, each of these machines and its base can be dismantled for transportation easily, and the machine is simple to operate with speed control and foot pedal.

Accessories include nine standard pairs of rolls, hardened and ground, (V2, V4 and V6 wiring rolls, S6 beating rolls, BC flanging rolls, F6 necking rolls, BB flanging rolls, SK5 box beading rolls, E20 crimping rolls), a storage holder for rolls, key for mounting rolls, a large backplate, which is parted and hardened, a machine stand, connection cable, variable adjustable speed with control for slow speed, right/left direction control, and packing.

Models SME 80, SMP 100, SME 125:

These vertical beading machines can be designed, sized and operated according to user requirements. Possibilities range from manual roller setting to motorised roll in setting, with operation by push button colour foot switch or touchscreen.

These machines are of welded steel construction and have a cylindrical unloading of the under shaft. Drive of the rollers is operated by a double foot switch for clockwise and anti clockwise running.

Shafts are hardened and ground. Easy axial adjustment of the lower roller is performed by hand wheel. Feed for the upper roller is also performed by hand wheel. Control is included in a separately fitted control cubicle.

Special accessories are also available:

A parallel feed of the upper roller can be performed with working shaft mounted in roller bearings. An infinitely variable motor is controlled by foot switch, speed limiter and hand reversing switch for clockwise and anticlockwise running.

Hydraulic feed of the upper roll is by time control program, semi-automatic, by means of simple foot switch and hand reversing switch. Motorised feed of the upper roller is done with distance measurement.

Pneumatic feed of the upper roller is available with end stop. It is also possible to obtain a fully automatic control with program memory and operation by touchscreen.

Also available are a pipe holding device, tensioning strap, hardened shape rollers, hand-operated central lubrication and divided stop.

Models SMP 160, SME 200:

These vertical crimping machines have a program that runs fully automatically. The machines are operated by touchscreen and foot switch. The feed roller can be accurately position by the motorised setting by means of an impulse generator. These machines can also be supplied with hydraulic roller feed and semi-automatic operation.

Design features include a parallel feed of the upper roller with working shaft mounted roller bearings, a welded steel construction, cylindrical unloading of the under shaft, and drive of the rollers by double foot switch for clockwise and anticlockwise performance.

Shafts are hardened and ground, easy axial adjustment of the lower roller is made by hand wheel, and feed for the upper roller is also by handwheel. A separately fitted control cubicle is available.

Standard accessories include a hydraulic feed for the upper roller with fast and creep speed, hardened stop and screwed on plate, stable underframe (electrical safety control), connection voltage 400 V/50 Hz/3, a two storage gearbox, brake motor, and roller a key.

Newsletter sign-up

The latest products and news delivered to your inbox