Madison Technologies introduces the new ioLogik W5340 Active GPRS I/O from Moxa.
The ioLogik W5340 incorporates several powerful functions such as power saving, data logging, active alarm message with real-time stamp including SMS, SNMP Trap, TCP, and email, making it highly suitable for GPRS remote monitoring and alarm systems.
The ioLogik W5340 Active GPRS I/O comes with 4 AIs, 8 DIOs and 2 relay outputs and is Moxa’s first Active Ethernet I/O that uses GPRS communication technology.
Allowing for a wider coverage area, the ioLogik W5340 is ideal for hard-to-wire locations in remote monitoring and alarm applications such as unmanned site monitoring, riverside monitoring and pipeline monitoring.
Creating a remote monitoring and alarm system in GPRS dynamic IP environments is easy with the ioLogik W5340 Active GPRS I/O and Moxa’s Active OPC Server.
Remote ioLogik W5340 units will automatically establish communications with an Active OPC Server using a fixed IP. The Active OPC Server will then receive and register the ioLogik W5340’s IP address, and also receive and record tag updates.
The ioLogik W5340 Active GPRS I/O can be easily integrated with any SCADA system as it supports Moxa’s powerful Active OPC Server.
In addition to supporting the standard OPC protocol, Moxa’s Active OPC Server with non-polling architecture also offers active communications between Moxa’s ioLogik series of Active GPRS I/O products and HMI/SCADA systems with instant I/O status.
Key features of the ioLogik W5340 Active GPRS I/O:
- GPRS, Ethernet LAN, RS-232/422/485 supported
- Smart Active GPRS connection
- Low power consumption
- Active messaging with real-time stamp
- Data logging with SD card