Home > JetNet 3010G/3010GT industrial Gigabit unmanaged switches released

JetNet 3010G/3010GT industrial Gigabit unmanaged switches released

Supplier News
article image JetNet 3010G/3010GT

For copper-wired Ethernet networks needing Gigabit switching performance, fulfilling networking high throughput demanding, the Korenix releases an innovative industrial Gigabit flagship switch series, JetNet 5010G industrial Gigabit managed switch, 7-port 10/100 Fast Ethernet plus three combo Gigabit slots, and JetNet 3010G/3010GT industrial Gigabit unmanaged switches. These solutions suit the ideal for a higher bandwidth media networking environment, and to begin a gradual migration to Gigabit speeds for industrial automation.

Three Gigabit combo ports

The JetNet 5010G/3010G equips three combo Gigabit slots, three small form factor plug-in SFPs (mini-GBICs slots to accommodate 1000BASE-SX, 1000BASE-LX or 100BASE-FX connectivity) that can connect to fiber cabling as uplink for flexible Gigabit Ethernet backbone, the other two ports as Gigabit Fiber Redundant Ring. The fiber SFP modular with various ranges of fiber transceivers are greatly fulfilled the tailor made industrial applications. The three RJ-45 Gigabit copper ports are also available for connections to Gigabit devices. The switch will automatically detect the Gigabit cable connections priority for each Gigabit slot.

Robust mechanical design

The special fan-less mechanical design adapts the thermodynamic technique to ventilate heat generated from Gigabit Ethernet modular efficiently. The form factor with nicely inward curvature on the sides driving air flow through the enclosure, it helps carry the rising heat toward the top ventilation holes to let the chimney-effect flows become effective. Using aluminium extrusion case with industrial arts quality, light weight, rigid assembly, good thermal conductivity, fin-type by extending heat dissipation surface assures units can be operated under harsh industrial environment.

Superb management features

It is critical for industrial applications that network remains non-stop. JetNet 5010G supports Rapid Super Ring technology providing network redundancy with fast failover time. JetNet 5010G also provides users with many advanced management features. JetNet 5010G can be configured smartly by SNMP or console CLI or web browser. Network administrators can define event notification to be sent via E-mail, SNMP trap, system log or relay output. To optimise network traffic, network administrators can segment ports into different VLANs, or filter multicast traffic by IGMP Snooping.

Major features of industrial Gigabit managed switch JetNet 5010G

  • 7 10/100 Base TX and 3 Gigabit RJ-45/SFP combo, (10/100/1000 Base-TX, 1000BASE-SX, 1000BASE-LX, or 100BASE-FX)
  • 7.4Gbps wire-speed forwarding rate
  • Supports Rapid Super Ring (recovery time <30ms)
  • Supports dual homing II to enable RSTP over Rapid Super Ring protocol
  • 8K MAC address auto learning
  • Up to 6 static trunk/ 802.3ad LACP
  • Supports VLAN/ QoS/ IGMP snooping/ rate control/ online multi-port mirroring
  • Supports CISCO Like CLI , web management
  • Supports SNMP/RMON network management
  • Secured management by HTTPS and SSH
  • Event notification by E-mail, SNMP trap, syslog
  • Digital input and relay output
  • Redundant DC power inputs
  • Rigid aluminium case complies with IP30
  • 2KV port to port isolation
  • DIN-rail/wall-mounting/desktop installation

Major features of industrial Gigabit unmanaged switch JetNet 3010G

  • 7 10/100 Base TX and 3 Gigabit RJ-45/SFP combo, (10/100/1000 Base-TX, 1000BASE-SX, or 1000BASE-LX)
  • 7.4Gbps wire-speed forwarding rate
  • Auto speed sensing 10/100 Mbps connectivity on RJ-45 ports and 10/100/1000 Mbps on Gigabit copper ports
  • Auto MDI/MDIX on RJ-45 ports
  • Plug-and-play installation
  • Redundant DC power inputs
  • Rigid aluminium case complies with IP30
  • 2KV port to port isolation
  • DIN-rail/wall-mounting/desktop installation

Newsletter sign-up

The latest products and news delivered to your inbox