Pallet Dispensers: Air and Hydraulic from King Materials Handling

Got a Question about this product?

Pallet Handling Equipment

Air and Hydraulic Pallet Dispensers

Air and Hydraulic Pallet Dispensers
Loaded from the front with a hand or powered pallet truck or forklift, the pallet dispenser dispenses a single pallet onto the floor or a powered conveyor. The pallets can also be dispensed to the rear, left or right.

The shipping bar shown at the front top of the blue pallet dispenser is used to lift and locate the dispenser. It is stored at the rear when not required.

One pallet dispenser model comes with a separate air compressor. The compressor is also built into a sound deadening cabinet.

Two of these 25 pallet units were installed in a newly opened DC.

Pallet Dispenser Features

Pallet dispensers are available in 15, 20 and 25 pallet models
Simple lever or two button operation
Pallet dispensers are available in shop air, inbuilt 240 V compressor or hydraulic power pack operation
15 pallet base unit houses all control, lift and lower functions
A 5 or 10 pallet chute is added to increase the storage capacity
Chutes are shipped in knockdown form inside the base unit, in order to reduce freight costs
The pallet dispenser base unit can be shipped in a standard container
Pallets that differ in size from the Australian standard can also be catered for

Got a question about this product

More information about this product

Contact Details

Contact King Materials Handling

By sending this enquiry you will also be informed of other related opportunities.

First Name

Surname

* Your Name

So the supplier can address you personally

Phone

Will only be sent to the supplier, no one else

* Your Email

Will only be sent to the supplier, no one else

State

So you get the most relevant information

Personal Message

No Yes

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

* does not match

Send Enquiry

News sign up

King Materials Handling News

Multi-purpose drum trolleys available from King Materials Handling (17/03/2009)

King Materials Handling offer the King multi purpose drum trolley. It is light and safe to use. The King multi purpose drum trolley is zinc plated, has a double torsion sprung axle and is a four wheeled, two angled, four ...

Highlite lifters available from King Materials Handling (16/03/2009)

The Highlite lifter, available from King Materials Handling, has a lightweight frame constructed of aluminium alloy. This lightweight stacker (60Kg with forks and legs attached) is suitable for tradesmen to carry in their ...

Hoist jibs for wall and floor mounts available from King Materials Handling (13/03/2009)

Hoist jibs for wall mounts, available from King Materials Handling, clamps to a 50mm diameter pole. The pole can be either standard scaffold, or a length of pole can be attached to two brackets, which can be screwed to a ...

Onboard forklift truck weighing systems available from King Materials Handling (12/03/2009)

The onboard forklift truck weighing system, available from King Materials Handling, is a low cost reliable weighing system for forklift trucks, which fit directly into users’ existing hydraulic hose system, with load weights ...

Quickstak automatic loaders/unloaders available from King Materials Handling (11/03/2009)

Quickstak, available from King Materials Handling, is used as a materials handling solution for moving or lifting or unloading different materials. The Quickstak automatic loader/unloader can be manoe

Dumpmaster bin tippers for wheelie bins and dump bins available from King Materials Handling (11/03/2009)

Dumpmaster bin tippers offer portable, quick, efficient disposal of waste from wheelie bins to dump bins. There are various versions available for 660 and 1100 litre wheelie bins. The Dumpmaster bin t

Pallet/ load inverters available from King Materials Handling (11/03/2009)

Pallet or load inverters, available from King Materials Handling, rotate a load to 180 degrees in order to swap a wooden or in-house pallet for a plastic/stainless/aluminium pallet and vice versa. Pallet or load inverters ...

Telemetry load sensor shackles available from King Materials Handling (10/03/2009)

The telemetry load sensor shackles, available from King Materials Handling, can obtain exact weights on any load. The users simply need to place the shackle onto any hook, then hang the load from the shackle pin and the ...

Electric chain and wire rope hoists available from King Materials Handling (10/03/2009)

King Materials Handling have a range of hoisting equipment from chain hoists, clamps, slings, hooks to magnets. Electric chain hoists are available in a variety of single and three phases. The capacities of these chain hoists ...

Genie automatic load lifters available from King Materials Handling (9/03/2009)

The Genie automatic load lifter, available from King Materials Handling, has a 91kg capacity, a deck size of 360mm deep x 430 mm wide with a low height of 50mm. The Genie load lifters maximum lift height is 1700mm. The lift ...

Multi-purpose drum trolley from king materials handling (11/10/2007)

The multi-purpose drum trolley from king materials handling is shown loading a 200 litre (55 gallon) drum on to a standard pallet 150mm (6”) high.

Features of king’s multi-purpose drum trolley (11/10/2007)

The king materials handling’s multi-purpose drum trolley solves drum handling problems.

Stainless steel safety cage (23/05/2006)

KING Materials Handling can now supply a safety cage in 304 stainless steel for food, pharmaceutical, and chemical industries, or simply for outdoor use. Based on the current design, where the handles are inboard, the gate ...

Stainless steel safety cage (4/05/2006)

KING Materials Handling can now supply a Safety Cage in 304 stainless steel for food, pharmaceutical and chemical industries, or simply for outdoor use. Based on the current successful design where the handles are inboard, ...

No cables or electrics are needed to work the King-Air pallet.

King-Air pallet dispenser (20/09/2005)

KING Materials Handling has introduced the King-Air pallet dispenser - an easy to use, simple in design and function and tough enough to withstand any wayward forklift. Two models are on offer - 12 pallet or 18 pallet. The ...

Fifty per cent above capacity rotation testing.

Non-hydraulic pallet inverter (11/02/2005)

KING Materials Handling has released the King pallet inverter. It has no hydraulic oil to leak from seals or joints, no burst hoses, no hydraulic power pack, no variations in clamping pressure, no hoses to kink and vibrate ...

Multi-purpose drum trolley redesigned (8/08/2002)

THE King multi-purpose drum trolley has been redesigned, following a change from modular to a one-piece frame system. Originally designed so it could be shipped in parts, it was found that by redesigning, the whole frame ...

RSS Feed

News sign up |

Collapse King Materials Handling News

Sections

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.