The ASM 1002 Helium leak detection workstation can find leaks as small as 1x10-9 mbar.l/s. Leak tests can be performed in as little as 4 seconds (single or batch testing) with a standard test chamber (81cc) and without nitrogen purge.
The powerful pumping package evacuates the test chamber and allows the unit to perform the leak tests fast and accurately.
The ASM 1002 Helium leak detection workstation is automated - as soon as the test chamber is closed, the cycle automatically starts.
When the test is finished, the ASM 1002 Helium leak detection workstation displays a pass/fail result, removing any operator interpretation.
In the instance of a good part (pass/green light), the test chamber will vent back to atmosphere and will open automatically, optimising the operator time.
For a leaking part, the fail/red light will be activated. The test chamber then remains under vacuum and requests the operator’s intervention to vent it back to atmosphere through a button. This removes any misinterpretation from the operator and guarantees the capture of all leaking parts.
The software keeps the unit in test mode for the length of time needed to allow the operator to perform the leak test. The standard test chamber can be easily removed and any custom fixture or test chamber can then be installed to perform testing of varying test objects.
The ASM 1002 Helium leak detection workstation is ergonomic allowing the operator to sit comfortably while leak testing parts. This removes the usual burden of standing in front of a leak detector for hours.