The Humidisorb Moisture and Corrosion Control Packets supplied by JT Day Pty Ltd offer excellent protection against damage from relative humidity and corrosion for any enclosure or piece of equipment that is operating, in transit, or in storage.
The contents of each packet do not affect or damage non-metal material and can withstand maximum temperatures of 176°F (80°C) and contact with bulk liquid water without impacting on their effectiveness.
The self-adhesive mounting tape on all packets allow for easy installation into any enclosure.
The Humidisorb moisture and corrosion control packers are filled with a self-regenerating desiccant that can absorb and release enormous quantities of moisture from surrounding air without becoming saturated.
When first placed in service, a packet of granules will begin rapid absorption of moisture before coming to equilibrium with the relative humidity (RH) of surrounding air. This will usually take several weeks to occur, even in very humid environments.
Humidisorb packets are ideal in typical electrical/electronic enclosures. Most of the corrosion and stray electrical currents that occur in enclosures result from daily RH spikes. Humidisorb packets are designed to control the spikes by maintaining a constant, low level of humidity in an enclosure over long periods of time.
These packets can be used in the following applications:
- Electronic and mechanical enclosures
- Transmitter housings
- Equipment cases
- Field mounted equipment
- Stored equipment
- Goods during shipment
- Moisture sensitive products
- Paper goods