The Rambor rib drill, available from Integrity Pumps and Engineering , is suitable for coal, stone and concrete. It has the following features:
- Finger tip water control
- Impact resistant polymer casing
- Custom designed chuck
- Optional wet or dry drilling
- Finger tip air control
- Energy saving air motor
- Low velocity exhaust
- Reduced noise emission
The dimensions of the Rambor rib drill are: height 240mm x width 550mm x depth 240mm weighing from 10kg to 13.5kg depending on the product purchased. The water supply of the Rambor rib drill varies from 100 to 175 psi with the flow rate of 20 l/min and has an air hose size of 25mm.
The Rambor rib drill features an energy efficient steel gear air motor, delivering 68Nm of torque without the kick back from vane motors. Exhaust air velocity is totally dissipated within 300mm of the Rambor rib drill. This overcomes the problems associated with the air exhaust by increasing the exhaust discharge area, eliminating dust problems and safeguarding the operator against any injuries that may occur. The polymer casing doubles as a silencer cover by reducing noise levels.