DVC-4112 270 Mb/s SDI to Composite Converter and DA is a high performance SDI 270 Mbit/s serial digital video to analogue composite/component converter and distribution amplifier.
The DVC-4112 270 Mb/s SDI to Composite Converter and DA is designed to regenerate a link and provide a broadcast quality analogue composite or component signal.
The serial receiver section automatically equalises and re-clocks the input serial video signal and the cable driver section retransmits the regenerated serial video.
This configuration allows both an extension of the link and a jitter performance advantage over non re-clocking regenerators.
The DVC-4112 270 Mb/s SDI to Composite Converter and DA is primarily intended to operate in mixed (digital and analogue) environments allowing existing analogue monitoring equipment to be utilised without the need to purchase more expensive digital equipment.
The DVC-4112270 Mb/s SDI to Composite Converter and DA provides component outputs for many requirements: RGB, YPbPr and S-VHS (Luma + Chroma).
Three composite outputs are always available plus a choice of one of the remaining component formats.
Full 10 bit video processing and 10-bit digital to analogue converters are used in order to assure a high quality analogue signal suitable for broadcast and production monitoring applications.
Simple Network Management Protocol (SNMP) monitoring is possible with the DVC-4112 270 Mb/s SDI to Composite Converter and DA if mounted in IRT Electronics ’ 4000 series frame fitted with SNMP capability.
- Broadcast quality, full 10-bit video conversion
- 4 Equalised, regenerated and re-clocked repeater outputs
- 3 Composite analogue outputs with high quality 10 bit D to A
- Component (RGB, YPbPr) or S-Video (Y/C) output
- PAL or NTSC operation with auto or manual switching
- SDI input loss and decoded video indicators on front panel