Home > HDA-4510 video reclocking distribution amplifier available from IRT Electronics

HDA-4510 video reclocking distribution amplifier available from IRT Electronics

Supplier News
article image HDA-4510 video reclocking distribution amplifier

HDA-4510 1.485 Gb/s serial digital video reclocking distribution amplifier provides the user with a single standard module to cover a wide range of distribution and monitoring functions for High Definition (HD) digital signals.

As well as accepting an HD signal, the HDA-4510 1.485 Gb/s serial digital video reclocking distribution amplifier will also accept Standard Definition (SD) rates such as SDI. ASI is also possible, however as three of the six outputs are inverted only the non-inverted output ports are suitable for ASI.

Serial digital signals suffer severe deterioration over relatively short cable distances. This is especially so with the HD high data rate. The HDA-4510 provides a means of extending the working distances that can be achieved by equalising and re-transmitting the data mid route.

The HDA-4510 1.485 Gb/s serial digital video reclocking distribution amplifier will automatically reclock either a 1.485 Gb/s HD signal or a lower rate SD signal and automatically adjust the output driver slew rate to suit.

Front panel LEDs on the HDA-4510 1.485 Gb/s serial digital video reclocking distribution amplifier indicate when an input signal is present and also whether it is either an HD or SD type of signal.

A relay alarm output, with a selectable N/O or N/C switch to ground contact, is available for indication of loss of input signal or loss of power.

An optional SNMP (Simple Network Management Protocol) plug in module is available for remote monitoring when used in conjunction with IRT’s 4000 series frame fitted with SNMP capability for the HDA-4510 1.485 Gb/s serial digital video reclocking distribution amplifier.

The HDA-4510 1.485 Gb/s serial digital video reclocking distribution amplifier is designed to fit IRT’s 4000 series frame for use with IRT Electronics ’ SNMP system as well as being suitable with IRT’s Standard 1000 and 3000 series Eurocard frames and may be used alongside any other of IRT’s analogue or digital Eurocards.

Features:

  • Automatic selection of either High Definition or Standard Definition digital signals
  • 6 reclocked outputs
  • Automatic input equalisation
  • Locked signal presence LED and external relay alarm contact
  • Optional plug-in SNMP monitoring module

Newsletter sign-up

The latest products and news delivered to your inbox