THE ET series of lift link load cells from Applied Measurements Limited (UK), represented by Hylec Controls , has been specifically developed for the measurement of cable tension and under hook crane/lifting gear weighing.
Load cell data is transmitted to the display by telemetry making interconnecting cables obsolete.
Maximum transmission distance is 200m with load ranges between 1 and 500 tonne. Accuracy is less than 0.20%.
The weight and overall height of the ET series is much lower than that offered by other manufacturers, thus reducing the headroom required for the installed system. The ET is sealed to IP67.
The operator has only 3 front panel tactile switches on/off, hold and tare.
Both link and instrument include automatic power down, when not in use, to conserve battery life and are addressable enabling up to 255 units to be used on one installation.
Each ET telemetry lift link system is supplied in a rugged carrying case with calibration certificate, full supporting documentation and a 3-year warranty.