Gorman-Rupp’s Auto-Start sewage pumping stations, available from Hydro Innovations , are pre-engineered units available with Super T Series, Ultra V Series and VS pumps with an extensive selection of motors, controls, piping and accessories. Gorman-Rupp has many standard designs of pumping stations for new installations, or custom designs can be provided for existing installations with minimum hookup time. Auto-Start sewage pumping stations are available with 2", 3", 4", 6", 8" or 10" pumps, depending on pump model. For consistently heavy flows, a third or fourth pump may be added. Flows on the sewage pumping stations are available to 3400 GPM on single pump operation. For high head/low flow, they offer standard staged designs.
These base mounted auto-start sewage pumping stations use a liquid level control which automatically converts to 12 volt DC and drives the pump with a standby engine providing normal pumping service during power failures. When power resumes, AC motor operation is automatically restored. It meets all standby requirements and uses a variety of fuels. The Auto-Start sewage pumping stations are a space-saving, modular combination of pump, electric motor and engine, all coupled to the same drive, eliminating the need for an expensive engine/generator set.