Accusolids is a system designed for measuring the suspended solids concentration in waste water or process liquids.
Accusolids measures solids using a multiple-beam photometer probe. The solids measurement is calculated from a combination of the results from different paths, compensating for both ambient light and temperature. Accusolids is available from Accurate Detection.
The submersible Accusolids probe has a 1 1/4” mounting thread, 2½” tri-clover and a 10m cable (can be extended to 90m).
Accusolids is suitable for open water, drains, pits and vessels. Accusolids is thermal shock proof and rated at 0- 100°C continuous.
The display can be calibrated to any range or units, including: % concentration, turbidity units, g/L, etc.
The 4-20mA output can be set to any scale over the full range. The two relay outputs can be independent configured as alarms, fault warnings, or as a cleaning mechanism timer. It has an IP65 Surface mount or DIN Rail Mounting Enclosure.
The Accusolids has a 32 character LCD display allowing all options to be accessed in a user-friendly manner.
Calibration can be performed with 3 button presses on any sample at any time. The optional RS485 digital communications support MODBUS output and configuration.