Chemical Injection Quills and Diffusers
H2O Rx's chemical injection quills and diffusers are manufactured by Saf-T-Flo for water and wastewater chemical feed systems, engineered for safety and reliability for each application. These high quality injectors are perfect for injecting a chemical solution into a pressurised water main or process piping system. Options include: retractable or non-retractable, a wide range of materials & sizes for pressures up to 103 Bar and to ensure all chemical compatibilities and BSP, NPT & flanged connections.
Chemical Injection Equipment
- Chemical Injectors, Quills and Lances
- Chemical Diffusers, Sparges and Bell Mouth Diffusers
- Chemical Injection Nozzles
- Sampling Probes
- BSP, NPT and Flanged Injectors
- Retractable and Non-Retractable Injectors
- Injection Assemblies
- Aqua Ammonia Injection Assembly
- Sodium Hypochlorite Assembly
- Engineering and Custom Fabrication
Chemical Injection Quills and Diffusers Applications
- Chemical Feed Systems
- Chlorination
- Dechlorination
- Open Channels
- Pump Stations
- Wastewater Treatment
- Water Storage
- Water Treatment
Chemical Injection Quills and Diffusers Specifications and Features
- Retractable Chemical Injection Quills to 10 Bar
- Retractable Chemical Injection Quills to 17 Bar
- All PVC Retractable Chemical Injection Quills to 10 Bar
- Non-Retractable Injections Quills to 103 Bar
- Retractable and Non-retractable Sampling probes
- Standard Injector tube sizes: 1/4" (DN 8), 3/8" (DN 10), 1/2" (DN 15), 3/4" (DN 20), 1" (DN 25), 1-1/2 " (DN 40), 2" (DN 50), 2-1/2" (DN 65)
- Injector Tube Material: PVC, CPVC, Alloy 20, Alloy C-276 (Hastelloy © ), Stainless Steel, PVDF (Kynar © ), Titanium Grade 2
- Injector Solution Tube Length: All lengths available for 1/3 - 1/2 diameter of main. Note: Material and pressure can restrict tube length
- Injector Solution Tube Tip Configurations: Standard, 45 Degree Bevel, Diffuser Holes, SAF-T-SEAL (EPDM or Viton) for anti-clogging
- Main Connection sizes: 1/2" (DN 15), 3/4" (DN 20), 1" (DN 25), 1-1/4" (DN 32), 1-1/2" (DN 40), 2" (Dn 50), 2-1/2" (DN 65), 3" (DN 80)
- Main Connections: BSP, NPT, Flanged
- Options include: Quick release coupling, check valves, Shut off valves, flexible hose assemblies
- Retractable feature including stainless steel limit chains and restraint hooks allow operators to safely remove and insert the injection quill while under pressure
- Depending on main pressure no shut down of the water main or process piping system is required for the retractable injectors