Traction Guard is a highly effective DIY non slip product suitable for use on vinyl, polished wood, epoxy, rubber, and linoleum.
Slippery floors are a result of two factors - the inherent slip resistance of the surface and secondly, foreign materials on the surface.
Traction Guard has detergents/surfactants that effectively break down and suspend soils which will remove the potential cause of many slippery floors.
Traction Guard also contains special additives which increase the coefficient of friction beyond the level normally inherent in the existing floor surface creating a non-slip surface which is safe for pedestrians.
Traction Guard has been used extensively in commercial kitchens, hospitals, nursing homes, factories, fast food outlets and has had a great reception.
Many of these businesses have replaced their cleaners with Traction Guard and rely on it to provide a slip resistance better than what they had previously.
Traction Guard has been designed to replace daily cleaning products it both cleans and provides a non-slip finish.
Because it contains cleaning agents, Traction Guard can be used in place of normal cleaning products. Traction Guard is a highly effective degreaser/cleaner and is sold in 1 gallon jugs and is mixed with water.
Traction Guard product is mixed with water and is mopped on and the first application would be applied at a ratio of 8:1 (water to chemical) Further applications would be applied at a ratio of 16:1.
Traction Guard is cost effective and works out at about 1/2 cent per square metre.
Traction Guard non-slip treatment can be purchased from authorised Grip Guard operators who, using an ASM slip meter, can demonstrate the increase in slip resistance that is achieved by the Traction Guard.
Floor surfaces are required, by law, to reach minimum standards of slip resistance.
Meeting these requirements is now easier. Grip Guard Non Slip has an anti-slip solution for every floor surface.