- Each module of the ladder consists of two stiles, one rung and two retaining clips.
- Each stile measures 360mm long, 80mm wide and 32mm thick maximum dimension.
- The ladder width outside the stiles (uprights) is 435mm and it weighs approximately 5kg per lineal metre.
- The ladder has 30mm diameter rungs at 300mm centre
spacing and the width or foot space inside the stiles is 375mm.
- The ladder is assembled on site using the number of modules required to achieve any length requirement.
Benefits of the Modular Ladder System
- It is modular and can be transported over long distances more economically than fully assembled ladders.
- It does not have to be measured prior to order and can be made up to any length on site as required.
- The ladder packs can be transported in a lift or by crane and assembled at the top or at the foot of a structure.
- There is no maintenance required other than occasional cleaning with a pressure hose if desired.
- The modular ladder has excellent insulation properties so it can be used in applications where electrical cables are present.
- The FRN product is suitable for contact with drinking water.
- The fibre reinforced plastic materials used are UV tolerant and non-corrosive.
- Contractors and Water Authorities will have major benefits regarding OH&S issues, particularly weight. At approx. 5Kg per metre, the ladder is significantly lighter than steel or stainless steel.
Stair Safety Solutions
The Grating Company supply a range of nonslip stairs and antislip stair treads to facilitate Health and Safety in the workplace.
Tread covers and landing areas are also available.
All stock is manufactured from Isophthalic Polyester resin. This provides superior chemical resistance and provides numerous benefits to the workplace’s occupational health and safety.
Grating Company’s FRP (Fibreglass Reinforced Polyester) nonslip stair treads are available from in green, yellow or grey colours.
Our nonslip stairs are a standard 273mm wide and can be cut down to a required length.
Grating Company also manufactures special sizes in our machine shop. Special colours and nosings for nonslip stairs can also be made to order.
Benefits of FRP Anti-slip Stair Treads
- Corrosion resistant
- Non-slip surfaces
- Tailored to suit health and safety requirements
- Lighter than metals and easier to install
- Low maintenance requirements
- Non-conductivity prevents electrical hazards
- Impact resistant
- Flame retardant.
For more information about modular ladder systems, nonslip stairs and other antislip health and safety requirements, contact the Grating Company today!