Sealtek pipe repair solutions available from Global Pumps can be used to fix pipe leakages in three simple steps.
Sealtek pipe repair solutions offer a clear advantage by stopping leakages while the fluid is still flowing through the pipes. Sealtek eliminates the need to stop the plant to repair the leaking pipes.
Sealtek pipe repair products including Sealtek T600 Compound and T500 Bandage can be used for sealing pipes carrying high pressure, high temperature and even corrosive fluids.
Process for fixing pipe leakages using Sealtek T600 Compound:
Prepare the surface
Leaking pipe surfaces must be thoroughly cleaned by removing all oil and grease particles, rust, loose materials and existing coatings, followed by roughening the surface using a grinder, abrasive tool or file.
Mix Sealtek T600
Sealtek T600 is available in the form of a stick, a small part of which must be removed, twisted and kneaded till a uniform colour is obtained without any streaks. The mixed Sealtek T600 should be used within 6 minutes at 20ºC, with the time further reducing at higher temperatures.
Apply Sealtek T600
The prepared Sealant T600 mix can be applied on the cracks or other defective surfaces of the pipes to stop the leakage after making sure the prepared surface is completely dry.
While applying Sealtek T600, the flow through the pipe should be stopped till the product is cured. After a setting time of 30 minutes, the pipes are ready for use.
Sealtek pipe repair products are stocked in Australia and ready for immediate delivery by Global Pumps.