Available from Gamma Solutions , the AP-134 and AP-135 indoor 802.11n wireless access points maximise performance for mobile devices in extremely high density Wi-Fi environments and ensure strong threat protection using integrated MACSec security.
These multifunctional wireless access points deliver wire-like performance at data rates up to 450 Mbps per radio. Taking advantage of 802.11n technology, the AP-134 and AP-135 employ three spatial streams to deliver 50% more throughput and support 50% more mobile devices in high density Wi-Fi environments compared to previous generation access points.
The AP-134 wireless access point features two 3x3 MIMO dual-band 2.4-GHz/5-GHz radios with external antenna interfaces, while the AP-135 wireless access point features the same radios with internal antennas.
MACSec authentication and encryption on Ethernet ports enable secure access point deployment by interoperating with the MACSec capability on Aruba Mobility Access Switches and other wiring closet devices.
The AP-134 and AP-135 wireless access points both feature dual 10/100/1000BASE-T Ethernet interfaces and operate from standard 802.3af and 802.3at power-over-Ethernet (PoE) sources. The secondary Ethernet interface (active only when supplying 802.3at PoE or DC power to the access point) enables secure authorised backhaul for wired network-attached devices.
Working with Aruba’s line of centralised Mobility Controllers, the AP-134 and AP-135 wireless access points deliver secure, high speed network services that move users to a “wireless where possible, wired where necessary” network access model. The network can then be rightsized by eliminating unused Ethernet switch ports and thereby reducing operating costs.
The key to ensuring wire like performance and reliability from these access points is Aruba’s unique Adaptive Radio Management and spectrum analysis capabilities, which manage the 2.4-GHz and 5-GHz radio bands to deliver maximum client performance while mitigating any RF interference.
The multifunction AP-134 and AP-135 wireless access points can be configured through the Mobility Controller to provide WLAN access with part-time air monitoring for wireless IPS and spectrum analysis. They can also be configured as dedicated air monitors within the campus WLAN, or can be remotely located.
They are also able to provide wireless mesh networking for high performance network backhaul where wired cabling is not available.
Both wireless access points are built to provide years of trouble free operation and are backed by a limited lifetime warranty.