Run-On-Timers from Fantech

By Fantech

Got a Question for Fantech?

The VZ6 4 pin plug

In many applications it is desirable that a fan continues to run for a period after it is switched off for maximum efficiency. Some examples are below:

In a bathroom, where a shower generates steam, it is useful to run the fan for a period after the shower is turned off, as this produces two desirable outcomes. The first outcome is that the room is fully purged of steam, minimising condensation and ensuring that internal finishes are not prematurely damaged. The second is when the timer eventually turns off the fan, the air inside the ducting and surrounding the fan’s motor will be dry, preventing mould build up and corrosion in the ducting.

Fantech ’s comprehensive range of run-on-timers includes:

VZ Model: The VZ24C and VZ6 feature run-ons of 24 and 6 minutes respectively and can be mounted into the motor “J” box or switch board.

VZ-TS Model: A direct wired unit that replaces the need for a power point or wiring junction box. This unit is adjustable from 2 to 10 minutes.

VZM Model: This model is designed to be used with a duct exhaust system controlled by up to three switches, for example the toilet, bathroom and laundry. Adjustments from 0 to 28 minutes are available.

VZ-PL Model: A plug in, quick and easy to install run-on timer that is fixed at 6 minutes. Supplied standard with a 900mm extension lead and pre-wired 4 pin plug that ensures an additional active is provided to power the fan after the standard switch is turned off.

VA-VZ Model: Incorporates a run-on of 6 minutes and speed control function that adjusts the fan speed between 100% and 30%. This unit is also fitted with a 900mm extension lead and pre-wired 4 pin plug which makes it easy to install.

Power Sense Module

It is easy to turn on the clothes dryer and forget to turn on the exhaust fan. To help overcome this problem, Fantech have introduced the VC-ISNSE power sense module which automatically turns on the fan by sensing when the clothes dryer is in operation, whilst avoiding excess power consumption if the fan is left on when it is not needed.

The VZ-ISNSE Power Sense Module can be used with a run on timer, which will purge the room of any moisture after the dryer is switched off.

10/02/2009

Got a question about this product

More information about this product

Contact Details

Send to a friend

Contact Fantech

By sending this enquiry you will also be informed of other related opportunities.

First Name

Surname

* Your Name

So the company can address you personally

* Your Email

So the company can contact you

Phone

So the company can contact you

State

So you receive the most relevant information

Add Your Message

Yes No

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

* does not match

Send Enquiry

More products from Fantech

Energy Efficient Exhaust Fans from Fantech

News sign up

Fantech News

Energy recovery products now available through Fantech (22/12/2009)

Air Design is pleased to announce the release of the Modutherm Energy Recovery (ER) product range.

Fantech now distributes Vacon drives (21/12/2009)

Fantech has announced that it can now provide the high quality Vacon range of drives throughout Australasia.

New Minitube duct-mounted axial fans now easier to install (2/09/2009)

Almost three decades after its introduction, the Minitube series of duct-mounted axial fans has been updated.

Energy efficient QuietflowDCV inline fan range (2/09/2009)

The Fantech QuietflowDCV inline fan range is a new concept that uses sensors to automatically control the amount of ventilation according to the occupancy of a room.

Fantech QuietflowDCV inline fan range (7/08/2009)

The Fantech QuietflowDCV inline fan range is a new concept that uses sensors to automatically control the amount of ventilation according to the occupancy of a room.

Vogue ceiling/wall mounted fan series from Fantech (24/04/2009)

Fantech’s Vogue series of ceiling/wall mounted fans has been redesigned with a new modern look and easy to use features. The current Vogue series is attractive and functional.

Fantech’s Jetstream and Mixvent series of fans offer ventilation solutions in limited spaces (9/02/2009)

The challenge of creating comfortable living spaces in apartments is made easier with a new package from Fantech. Fantech have created a complete apartment ventilation system that requires little head room.

Fantech appoint Anthony Lamaro as Sales Manager for Victoria (6/02/2009)

After two years at Fantech, Anthony Lamaro has been promoted to Sales Manger for Victoria. Anthony has a Bachelor of Communications and has worked in sales for an electronic component company before c

Apartment ventilation systems available from Fantech (4/02/2009)

Fantech have designed a complete apartment ventilation system that requires little head room, and creates comfortable living space in apartments. As the primary component of the system, the fan needs to be slimline without ...

Fantech Melbourne move to new premises (3/12/2008)

According to John Tan, Fantech Finance Director, Fantech moved to a new home of over 10,000 square metres at 42- 62 Pound Road West, Dandenong South, just off the South Gippsland Highway and between the Monash freeway and ...

JetVent Airmover available from Fantech (6/10/2008)

Fantech offer a new range of Jet Vent airmover, latest development in ventilation solutions. The JetVent airmover works in large enclosed areas where the cross-flow of air provides welcome relief for those at work or play.

Fantech appoint Chris Ogilvy as their new Managing Director (30/09/2008)

Chris Ogilvy is the Managing Director of Fantech and the Elta Group Asia Pacific. The Elta Group consists of 11 independent companies in three continents, providing quality fans and related ventilation equipment to the global ...

Fantech opens office in Darwin and moves operations to South Dandenong (18/08/2008)

With a vision to form a company that would become one of Australia’s leading fan suppliers, Glen Harris set up office in his home in Ringwood Victoria with Jack Pirie with a small working capital of $600.00. They named the ...

Fantech launches JetVent Mixed Flow series ventilation solution (28/07/2008)

The Fantech Impulse JetVent range, from Fantech, has now been extended to incorporate the growing need for a more general solution to car park ventilation. In addition to the current range of JetVent Axial and Centrifugal ...

Fantech Plus Heat Transfer kit available from Fantech (23/07/2008)

The Fantech Plus Heat Transfer kit, available from Fantech, takes the air from the heated room and efficiently distributes it to one, two or three other rooms increasing the comfort level in the entire home.

Fantech develops Ezifit range of ventilators (17/07/2008)

Fantech has developed and tested a comprehensive range of ventilators called Ezifit. Fantech’s National Account Manager, Glenn Morgan, says “As the product name implies the Ezifit range is very simple to install as it removes ...

Kerry Dumicich - Fantech Engineering Manager, Stuart Pirie - Engineer Wood & Grieve Engineers, Julie Saunders - Engineer Wood & Grieve Engineers and Peter Cotterell Fantech Major Contract / Project Co-Ord

Fantech organises 3 day ventilation-training programme (19/06/2008)

Fantech is offering a practical 3 day ventilation-training programme structured to appeal to engineers working for consultants and contractors.

Fantech releases Fans By Fantech catalogue (17/06/2008)

Fantech has officially unwrapped its new version of the highly informative Fans By Fantech catalogue.

Impulse car park ventilation from Fantech (6/03/2007)

Impulse ventilation has been used in Europe for more than 10 years and while being effective offers substantial savings in power consumption and installation costs.

Fantech releases FlatPack Low Profile Duct System (5/03/2007)

The release of the FlatPack Low Profile duct rounds-off a range of products and systems by Fantech that are specifically and ideally suited to applications where ceiling space is restricted.

3-speed fan for sub-floor ventilation (20/03/2006)

FOLLOWING the success of the Ezifit range of thru-wall and thru-roof fans, Fantech has introduced the next generation Ezifit EIE150 In-Wall fan. It is ideal for residential and light commercial applications such as sub-floor ...

Fits into tight positions such as between ceiling joists.

25.4cm ceiling grille (15/12/2004)

FANTECH has released the RiteVent, a 25.4cm ceiling grille that is designed to fit into tight positions such as between ceiling joists. It uses ducted fans, such as Fantech's Ezifit Thru-Roof, Thru-Wall and in-line fans.

Exhaust fans (25/10/2004)

FANTECH has released the Ezifit range of exhaust fans. They are quick and easy to install and include a choice of Thru Roof and Thru Wall models.

Window or wall mounted fan (10/06/2003)

LOW noise, superior airflow, and competitive pricing are features of the new Fantech Plus range of HCM window/wall mounted fans. The HCM fans come in three sizes - 150, 180, and 225mm diameter - and feature a compact, low-profile ...

Fantech’s rectangular fire damper -- a round version is available, too.

Intumescent fire dampers (25/09/2002)

FANTECH has released a wide range of Intumescent Fire Dampers manufactured by Lorient. The damper design has moved forward from the traditional mechanical technique, where the heat from a fire causes a fuseable link to break ...

Flameproof fans for hazardous environments (5/09/2002)

FANTECH has designed a new range of compact flameproof fans specifically developed to meet the needs of small ventilation applications in hazardous or explosive environments. The range consists of three versions for different ...

Duct-mounted ventilation fan (5/09/2002)

FANTECH has released a new fan to complement its range of small diameter in-line duct-mounted fans. The new VentMaster is aimed at duct mounted applications where relatively higher system pressures are involved. These include ...

Anti-static fan impeller blades (6/06/2002)

STATIC electricity can easily be dismissed as a novel, harmless phenomenon. But in some fan applications its impact can be disastrous.

Window and wall fan weather protection (9/05/2002)

FANTECH has developed a specially designed weather cap for its Stylvent window and wall fans. The new cap is designed to provide added weather protection where a fan is window or wall-mounted in highly exposed environments ...

RSS Feed

News sign up |

Collapse Fantech News

News sign up

Circuit board refurbishment includes the addition of up to date technology

Electronic circuit board refurbishment service offered by Eltiv Australia Electronic Engineering (17/03/2010)

Eltiv Australia Electronic Engineering offer circuit board refurbishment that provides a cost effective solution to replacement.

Active Air Keeps Sizzling Australian Open Cool as Ice (17/03/2010)

Active Air Rentals supplies different kinds of cooling devices such as air conditioners, coolers and fans that help in making the event successful.

ODU SPC single power connectors from Clarke & Severn Electronics are economical and rugged (11/03/2010)

The ODU SPC single power connector product series, available from Clarke & Severn Electronics, are used for applications in regenerative energies, industrial systems and switching stations.

HF Amplifiers from ASD Technology (11/03/2010)

ASD Technology introduces the AMP-1200 and AMP-3100 Series HF Amplifiers which are extremely wide Dynamic Range devices designed for the pre-amplification of HF signals directly from antennas.

Matsu Chilling Systems for iCeutica (9/03/2010)

Summit Matsu Chillers were able to provide iCeutica with a reliable, economical air – cooled chiller system.

RSS Feed

News sign up

Sections

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.

Run-On-Timers from Fantech

More products from Fantech

Fantech News

Related Articles

Sections