INDUSTRIAL ducting specialist Eximo has available a range of valves that can be implemented in virtually any ducting configuration across most industries.
These units can be implemented with any of Eximo's metal ducting products and includes the following types:
60° branch type diverter valves
Manually operated, they are also available with pneumatic or electric operation as optional accessories.
These diverters can be adjusted to 45° operation simply by fitting a Speedlock 15° bend to the left inlet and one outlet.
Overall length ranges from 210mm to 475mm and housing thickness from 1.5mm to 2mm.
60° Trouser Type diverter valves
Eximo's 60° Trouser Type diverter valves are made from pressed steel plate, are painted, and have 2mm steel plate damper and brass bearings.
Ranging in inside diameter size of 100mm to 300mm, they range in length from 145mm through to 325mm and weigh from 2kg to 18.3kg.
Manually operated, these units are available with pneumatic or electric operation as options. They can be adjusted to 45° operation by fitting a Speedlock 15° bend to the inlet and one outlet.
Made from 0.9mm galvanised steel with double plate temper, Eximo throttle valves can be fitted with electrical pneumatic operation.
Supplied with inside diameter sizes ranging from 80mm to 500mm, these units are manually operated with continuously variable opening settings and 96% maximum closure.
Overall length ranges from 125mm through to 515mm, weight ranges from 0.65kg to 8.2kg, and gate thickness is 1.8mm.
General purpose rotary valves
These are made from pressed 3mm steel plate, are painted in high-gloss enamel, and are supplied with six rotor blades and rubber vanes.
Available in sizes from 250mm to 2000mm, these units run on a three phase geared motor and direct couple shaft with flanged bearing. Capacity at 20rpm, 50% full pockets ranges from 10m3/h to 83m3/h, and 6cfm to 49cfm.
High throughput rotary valves
Eximo's high throughput rotary valves are made from pressed 3mm steel plate and painted in high-gloss enamel with eight rotor blades and rubber vanes.
Operating in a direct couple greater shaft with flanged bearing, unit sizes range from 500mm to 1000mm and weigh from 140kg to 260kg. Capacity at 16 rpm, 50% full pockets is from 60m3/h to 120m3/h and 35 cfm to 71cfm.
High-pressure rotary valves
These units have a cast-iron casing and end plates painted in high-gloss enamel, with six armed mild steel rotor and nylon or vulkolan vanes.
Operating a direct couple rotor shaft with flanged bearing, the high-pressure rotary valves are available in sizes from 250mm to 350mm.
Using a stainless steel rotor, weight ranges from 120kg to 145kg and the product has capacity at 32rpm, 70% full pockets from 8.75m3/h to 27.75m3/h.