Motion controllers for brush and brushless DC-Motors from Erntec
Motion controllers for brush and brushless DC-Motors
The compact FAULHABER motion
controllers, available from
Erntec, are now more efficient and can be optionally operated through a RS232 or CAN interface.
The configuration of the electronics is based on a digital signal processor (DSP), which enables a high performance as well as precise positioning and low speeds. The high degree of efficiency permits a continuous output current of up to 6 amperes.
Optimally coordinated with the control of brush and brushless DC-Motors, they feature accurate speed/torque regulation as well as precise positioning with resolution of up to 1/3000 revolutions.
The inputs and outputs can be used for different purposes depending on the application, and can be configured through the interface. As a printed circuit board version the controller can also be integrated into superordinate systems.
In addition to the RS232 interface, these Motion Controllers are now also available with a CAN interface and CANopen protocol. This enables the networked control of up to 127 drives.
An easy-to-operate user interface and the next-generation Motion Manager 3 software are available for effortless operation of the Motion Controllers even without a profound knowledge of CAN interface technology.
The clear representation of all the connected drives and the simple menu structure complement each other perfectly in this high-performance controller.
2-Sep-2008