Eaton Filtration ’s Internal Gas/Liquid Separators are designed to be installed inside receivers, steam drums and other vessels where they will remove 99% of particles and liquid droplets of 10 microns or larger from air, gas or steam.
These are centrifugal Gas/Liquid separators that cause the gas stream to enter a controlled centrifugal flow. This action forces the entrained liquids and solids to the outer wall of the internal Gas/Liquid separator where they fall to a bottom drain.
The exit stream is drawn from the clean and dry center of the Gas/Liquid separator and that assures a clean and dry gas stream at the outlet. The Type 60-I has an upflow configuration while the 70-I has a downflow configuration. Both are fabricated from carbon steel and have 304L stainless steel blades.
To operate effectively, the internal Gas/Liquid separator must be located a minimum of 12 inches above the surface of the liquid, plus the pressure drop across the element in inches of water.