Eaton Filtration offers the standard size Type 10-R Series gas liquid separators designed for liquid slugs or heavy liquid loads and can be provided with a large reservoir to meet liquid hold-up requirements.
These 2-stage gas liquid separators feature a flanged design and fabricated carbon steel construction.
For applications where space is restricted, a compact model is available.
Type 10-R Series gas liquid separators are widely used in the chemical and process industries where large volumes of liquid must be separated from gases. They also may be used as a flash or surge tank, or as a scrubber or demister ahead of steam turbines.
Eaton Type 10-R Series gas liquid separators have two stages for separating large volumes of liquid from a smaller volume of a gas or vapour.
In stage one, the flow enters the inlet and is deflected downward by the impingement plate causing it to lose velocity. This results in the majority of the liquid dropping into the reservoir.
In the second stage the moisture laden gas passes through a vane element where the remaining moisture is separated and flows down to the reservoir. The separator will remove all liquid and solid entrainment where the particle size is 10 microns or greater.
Type R gas liquid separators are constructed in accordance with the ASME Code Section VIII, Division 1 and are code stamped.
They are available with 150# slip-on raised face flanges rated at 200psi at 300F or with 300# slip-on raised face flanges rated at 250psi at 650F.
The separators feature fabricated carbon steel construction and internal vane blades made of 304L stainless steel.
Key features of Type R gas liquid separators:
- Standard and compact models
- Capable of handling slugs of liquids
- ASME code stamp
- Two 1/2" NPT water gauge connection
- One 1/2" NPT vent connection
- Zero maintenance required
- Removes 99% of liquid and solid entrainment with particles larger than 10 microns
- Suitable for gas, steam or air applications
Options available for Type R separators:
- Support stand
- Stainless steel construction
- Multiple inlets and/or outlets
- Sizes larger than 16"