Home > Exhaust Heads from Eaton Filtration

Exhaust Heads from Eaton Filtration

Supplier News
article image Type 40EHMF Exhaust Heads

Exhaust Heads from Eaton Filtration are designed to separate entrained water and oil from exhaust air, gas or steam prior to being discharged directly into the atmosphere. They will remove more than 99% of liquids and solids over 10 microns in size from the discharged flow, reducing maintenance costs on roofs and surrounding objects.

The moisture laden gas, air or steam enters at the inlet of the exhaust head where it is directed into a centrifugal upward motion. The entrained solids and moisture droplets are separated out by a reduction in velocity. Separated material falls into a drain reservoir.

Type 40EHMF Exhaust Heads

The Eaton Type 40EHMF exhaust head muffler is fabricated from carbon or stainless steel and is electrically welded at all joints to withstand heavy duty usage. These exhaust heads work at high temperatures and remain efficient even when steam or gas is discharged at high velocities. The Type 40EHMF has been designed to minimize the noise associated with high discharge velocities. The units permit free flow of steam, gas or vapors with an absolute minimum of back pressure.

Type 40EHC Exhaust Heads

The Eaton Type 40EHC exhaust head is designed for long service life…with body, cover and separating element made of high tensile strength cast iron. Sizes 4" and smaller have threaded (NPT) connections. Sizes 3" and 4" and larger have 125# Flanged connections. The flange bolt holes are drilled to straddle the center line of the drain outlet. Flanges are cast integral with the body and have slotted holes which are recessed to prevent the bolt heads from turning (except for the 3" and 4" sizes which is available with flanged or threaded connections).

Newsletter sign-up

The latest products and news delivered to your inbox