SMC 1.27 mm connector system for SMT available from Erntec

By ERNTEC

Got a Question for ERNTEC?

SMC 1.27 mm connector system

ERNI SMC 1.27mm connectors from Erntec are the answer for applications where space is at a premium and packaging density and high-speed performance are a necessity.

These two-piece connectors are ideal for applications such as: notebooks, laptop and portable computers, compact peripherals, portable test and measurement equipment and other small electronic equipment.

Both male and female connectors are available in standard and inverse designs, with 12, 26 and 50 positions. A selection of three termination types are available:

IDC for .025” (0.635mm) ribbon cable
SMT straight and right angle
Thru hole straight and right angle

18/11/2008

Got a question about this product

More information about this product

Contact Details

Send to a friend

Contact ERNTEC

By sending this enquiry you will also be informed of other related opportunities.

First Name

Surname

* Your Name

So the company can address you personally

* Your Email

So the company can contact you

Phone

So the company can contact you

State

So you receive the most relevant information

Add Your Message

Yes No

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

* does not match

Send Enquiry

More products from ERNTEC

Precision Machining Services from Erntec

Connector Solutions from Erntec

Subrack / Card Frame Solutions from Erntec

Fieldbus and Profibus Solutions from Erntec

Miniature Enclosure Solutions from Erntec

Miniature Drive Solutions from Erntec

Optical Electronic Solutions from Erntec

Erntec Specialised LED Light Guide Systems

Custom Cabinet and Large Enclosure Solutions from Erntec

Miniature Motor Drives from Erntec

News sign up

ERNTEC News

Erntec offers complete ERmet ZD portfolio of connectors (6/02/2010)

Erntec now offers the ERmetZD range of straight male connectors and right-angled female connectors with the addition of new right-angled male connectors in 2, 3 and 4 contact pair versions.

ERbic profibus switches, now available from Erntec (5/02/2010)

ERNI Electronics continuously expands its well established ERbic field bus connectors for the Profibus, CANbus and SafetyBus standards, and are available from Erntec.

Custom welded cabinets are now available from Erntec (21/01/2010)

Erntec can manufacture fully welded cabinets to meet individual and specific requirements.

ConPower P150 connectors from Erntec (20/01/2010)

CONINVERS expands its circular connector product program by the power class M58, available from Erntec, with metric screw locking for the cable connector and the cable connecting receptacle, available with the usual pin ...

M8 circular connectors now available from Erntec (19/01/2010)

CONINVERS M8 circular connectors from Erntec are used for 3-/4-wire cables, for example within sensor applications.

New panel mounting connector with knurled nut now available from Erntec (18/01/2010)

Panel mounting connectors with knurled nuts make system parts and control cabinets "pluggable". A new variant - the Y4 style - now expands the product range of the modular M23 signal connectors of the modular M23 signal ...

Signal Indicators 2271 from Erntec (17/01/2010)

Mentor’s new signal indicators, now available from Erntec, are used as signal or warning light in key pads for instance in order to indicate visually switch status.

Push button caps 2271 from Erntec (16/01/2010)

The new illuminable push button cap line 2271 by MENTOR, and available from Erntec, has been designed for the use with SMD short-travel keys such as can be found with key pads.

C-HC stamped-rolled crimp contacts from Erntec (15/01/2010)

Stamped/rolled C-HC male and female contacts from CONINVERS, and available from Erntec guarantee reliable and permanent contacting, even under the most difficult application conditions.

Erntec offer encoders PA2-50 and PA2-100 (14/01/2010)

Faulhaber have expanded their encoder product line with the addition of its PA2-50 and PA2-100. They are now available from ERNTEC.

Brushless Flat DC Micromotors in two diameters with integrated electronics from Erntec (13/01/2010)

These durable flat DC micromotors are an ideal choice for portable devices or continuous duty operations like pumps and fans.

Brushless DC-Servomotors, series 32...BX4 from Erntec (12/01/2010)

The brushless 4 Pole DC servomotors of the renowned BX4 Series from FAULHABER are supplemented by motors with a diameter of 32mm.

Customised welded cabinets by ERNTEC (29/08/2009)

Erntec manafacture fully welded cabinets in a variety of construction materials.

19” desktop enclosure from ERNTEC (28/08/2009)

The InterMeZo housing is based on a frame work construction composed of profiles and angle connectors.

Vertical male connectors: 4 Pair cable headers from ERNTEC (27/08/2009)

Cable assembly from ERNTEC.

Ermet ZD connector cable system (26/08/2009)

ERmet ZD Cable Assemblies allow high speed digital signals to be transmitted further and with superior signal fidelity.

Push button cap line 2271 SMD short travel keys (25/08/2009)

The new illuminable push button cap line 2271 by MENTOR has been designed for the use with SMD short-travel keys such as those that are found with key pads.

C-HC stamped-rolled crimp contacts from Erntec (24/08/2009)

High performance for cost-effective processing

M-TUBE high brightness (20/08/2009)

Unlike conventional LED strips which emit isolated, lined up spots of light the M-TUBE is the first LED light guide system that dissipitates light perfectly homogeneous to the environment.

M-TUBE Flex by Erntec (19/08/2009)

The M-TUBE is an LED light system designed as a construction set

Magnetic Encoders Series IE3-256 (L) Combination with DC- Micromotors (4/08/2009)

The new incremental encoders of the IE3-256 (L) series are designed specially for combination with motors from the CR and CXR series and controllers of the SC 2804 or MCDC 30xx series.

Panel mounting connector with knurled nut from Erntec (4/08/2009)

Brushless DC- Motor with integrated encoder and servo controller (4/08/2009)

The Brushless DC- Motor with integrated Encoder and Servo Controller features precision run with low speeds.

MiniBridge Cable-to-Cable Connection (27/07/2009)

The ERNI MiniBridge product line opens the door for several additional fields of application.

ERNI Electronics Offers a Broad Portfolio of DIN-Rail-Enclosures for Industrial and Building Automation (17/07/2009)

ERNI Electronics continues to expand its popular and well-established 1.27mm SMC connector family with new adapters.

Brushless micromotors available from ERNTEC (20/05/2009)

Brushless micromotors, available from ERNTEC, feature Smovvy technology.

FAULHABER drive electronics available from ERNTEC (19/05/2009)

FAULHABER drive electronics, available from ERNTEC, are specifically designed for controlling FAULHABER motors. Motion controllers and amplifiers offer a range of controlling options for torque, speed

FAULHABER incremental shaft encoders available from Erntec (18/05/2009)

FAULHABER offer incremental shaft encoders for use with DC motors and brushless DC servomotors to indicate and control shaft velocity, direction of rotation and positioning. These incremental shaft en

New planetary gearhead 32A series available from Erntec (8/05/2009)

The new planetary gearheads of the 32A series, available from Erntec, come in one to four stage variants and are available in 17 finely graduated reduction ratios from 4:1 to 2076:1.

IE3-256 (L) series incremental encoders available from ERNTEC (7/05/2009)

IE3-256 (L) series incremental encoders, available from ERNTEC, feature robust housings and a compact 22 x 18mm format. These are designed to combine with motors from the CR and CXR series and controllers of the SC 2804 ...

FAULHABER 2237 CXR DC motor series available from ERNTEC (6/05/2009)

FAULHABER offer ultra-miniature 2237 CXR DC motor series, which are graphite commutated motors and is an addition to their drive range. The 2237 CXR DC motor series, available from ERNTEC, was developed on the basis of the ...

ERbic bus systems available from ERNTEC (5/05/2009)

For different ERbic bus systems, the interface connectors combine compact dimensions with horizontal or vertical cable termination. ERbic bus systems are available from ERNTEC. The colour coding describes different bus systems, ...

ERNI Electronics MicroStac connectors with 10 and 54 pins available from ERNTEC (4/05/2009)

ERNI Electronics have expanded their 0.8mm MicroStac SMT connector series to include a 10 (single row) and 54 pin (dual row) version. The MicroStac SMT connector series, available from ERNTEC, is based on a hermaphroditic ...

ERmet line of connectors available from Erntec (1/05/2009)

ERmet line of connectors, available from Erntec, offers performance and flexibility for today's system designs. With constant technical advancements and expansions, this series of connectors supports any possible arrangement ...

Board-to-cable connectors available from Erntec (30/04/2009)

Erntec's LPV family of IEC 60603-13 (DIN 41651) compliant connectors offers a spectrum of board-to-cable connectors with a 2.54mm pitch.

Power tap connectors for connecting power supply lines available from Erntec (29/04/2009)

Two-row power taps featuring either an elastic pressfit zone or soldering termination were developed by Erntec for connecting power supply lines. Cable plugs or terminal sockets can be optionally used for cable termination.

Erntec unveil illuminated tray handle system (6/04/2009)

Erntec launched the illuminated tray handle system, which allows several options in the customer specific handling.

Industrial circular connectors with quick locking system available from Erntec (3/04/2009)

Coninvers circular connectors of the series ConPower P20 (M17) and ConPower P70 (M40) is available from Erntec.

Modular M23 signal connectors available from Erntec (2/04/2009)

Panel mounting connectors with knurled nuts make system parts and control cabinets ‘pluggable’.

Coninvers M16 circular signal connectors available from Erntec (1/04/2009)

Coninvers M16 circular signal connectors, available from Erntec, come with terminated cables, assembled and plastic-moulded and are extended by pin connectors and flanges. The production of connectors with a number of positions ...

LDG-S4 DIN Rail enclosures available from Erntec (31/03/2009)

The LDG-S series of DIN Rail enclosures, available from Erntec, are insulated enclosures according to the specifications of the machinery and automotive industries.

LDG-S2 DIN Rail enclosures available from Erntec (30/03/2009)

The LDG-S series of DIN Rail enclosures are insulated enclosures according to the specifications of the machinery and the automotive industries. The LDG-S series of DIN Rail enclosures are designed for easy snap-on assembly ...

Series 3564 brushless DC-servomotors with motion controller available from Erntec (27/03/2009)

Erntec offer series 3564 brushless DC-servomotors. These brushless DC-servomotors with integral motion controller provide a range of functions and enhanced performance. Series 3564 brushless DC-servomotors are optionally ...

The QUICKSHAFT Linear DC-Servomotor LM 1247

QUICKSHAFT Linear DC-Servomotors series LM 1247 available from Erntec (26/03/2009)

The newly developed Linear DC-Servomotor series LM 1247, available from Erntec, measures 12.5 x 47mm and weighs 56g. This actuator can produce a peak force of up to 9,4 N at full power. The standard p

2057 series brushless DC-Servomotor available from Erntec (25/03/2009)

Brushless DC-Servomotors Series 2057…B, available from Erntec, offer high power-to-volume ratio. The brushless motor is fitted with a high-energy, rare earth magnet, which results in a responsive mech

SMD components for 3mm-LEDs available from Erntec (24/03/2009)

Mentor have developed a horizontal SMD component for 3mm-LEDs that is suitable as switching status indicators. The housing caters for one as well as for two duo LEDs. The SMD component for 3mm-LEDs, a

Mentor Dynamism keyboards available from Erntec (23/03/2009)

Mentor's new Dynasim keyboard, available from Erntec, is flexibly designed, resistant to environmental influences and has an adjustable operating force. The Dynasim keyboard is robust and belongs to a

Mentor capacitive switches available from Erntec (20/03/2009)

The capacitive switch developed by Mentor and available from Erntec, belongs to a family of sensors. As the capacitive switch has been conceived for ‘no contact’ or ‘soft touch’ switches, where depressing a mechanical button ...

MicroSpeed Blind Mate Connectors available from Erntec (13/03/2009)

ERNI’s 10 Gbit/s MicroSpeed Blind Mate connector housing comes along with thicker side walls and is manufactured of high impact resistant thermoplastic UL94 V-0 rated LCP. The housing provides two polarised guide elements ...

Mentor’s LED testers available from Erntec (3/02/2009)

Mentor’s new LED tester, available from Erntec, provides fast, easy and reliable testing of SMD and THT LEDs. The device is useful for checking individual LEDs with varying specs and for comparative measuring of different ...

Mentor SMD-Light guides available from Erntec (2/02/2009)

The Mentor SMD-Light guides, available from Erntec, achieve an optimal luminous efficacy on the radiation area and avoid mixed instrumentation of THT- and SMD-components on the pcb (printed circuit board).

Mentor’s Dynasim keyboard available from Erntec (30/01/2009)

Mentor’s new Dynasim keyboard is flexibly designed, resistant to environmental influences and available with an adjustable operating force. Dynasim is the new version of the familiar low-profile keyboard with high end features. ...

Mentor M-Tube light guide bar available from Erntec (29/01/2009)

The M-Tube light guide bar, available from Erntec, consists of a modular design with the single elements light guide, accompanying clamping sleeve, housing equipped with an LED and a second equipped housing for the double ...

Illuminated tray handle systems available from Erntec (28/01/2009)

The outside tray handle system, available from Erntec, allows several options in the customer specific handling. The tray handle system can be used wherever there is no space for an integrated tray handle.

Mentor’s opto-electronic constructional elements with switch and key functions available from Erntec (27/01/2009)

Mentor have developed opto-electronic constructional elements with switch and key functions, which is based on the principle of light reflection. The opto-electronic constructional elements are available from Erntec.

Light guide junction available from Erntec (26/01/2009)

Light guide junction, available from Erntec, can be connected to one, two or three SMD LEDs and type 0805 or smaller.

SMD press switch and push button systems available from Erntec (23/01/2009)

The SMD component, available from Erntec, is mountable as a front panel component as well as directly on circuit cards and can be used in various applications. The SMD component is available as a push button and press switch ...

Single and two-row connectors equipped with 6 to 54 pins

MicroStac single and two row connectors available from Erntec (22/01/2009)

ERNI Electronics have expanded their 0.8mm MicroStac SMT connector series to include a 10-pin (single row) and 54-pin (dual row) version. The MicroStac advantage is based on a patented hermaphroditic design, a special design ...

New design concept of SMARTSHELL brushless DC-Servomotors available from Erntec (20/01/2009)

Faulhaber Group, represented by Erntec in Australia, have introduced a new design series SMARTSHELL Brushless DC-Servomotors.

Unidirectional single phase stepper motors available from Erntec (12/01/2009)

ARSAPE have released two new stepper motors suitable for applications where µA (Micro-Ampere) current consumption is the key requirement. These stepper motors series ASP, available from Erntec, are designed to offer minimum ...

MiniBridge 1.27mm single row connectors available from Erntec (9/01/2009)

The MiniBridge, a single-row, 1.27mm pitch SRC connector system, available from Erntec, is suitable for space-saving board to cable connections.

Precision Gearheads available from Erntec (3/12/2008)

Erntec offer a range of Precision Gearheads made by FAULHABER.

FTB miniature drive systems available in Erntec (2/12/2008)

Thin profile DC motors from Erntec are slim and therefore ideal for applications with a minimum of space.

AM 2224 compact power house stepper motor

Compact power house stepper motor AM 2224 available from Erntec (1/12/2008)

The 2-phase miniature stepper motor, available from Erntec, has a diameter of 22mm and a high power-to-volume ratio. In order to also have the advantages of this motor technology where more torque is required, the AM 2224 ...

ARSAPE stepper motors available from Erntec (28/11/2008)

ARSAPE offer stepper motors with lead screws or hollow shafts. These stepper motors are available from Erntec.

4490 BS series and 4490 B series of DC-servomotors

4490 BS series DC-servomotors available from Erntec (27/11/2008)

The 4490 BS series DC-servomotors are available from Erntec. Externally there is no difference between the ‘B’ series motors and the new ‘BS’ series.

FAULHABER Group’s miniature drive systems available from Erntec (26/11/2008)

FAULHABER Group, represented by Erntec in Australia, offer power-efficient series of miniature drive systems. Three Hall sensors detect the position of the rotor by evaluating its magnetic field, which, with their output ...

DC-Micromotor Type 0615 and Planetary Gearhead Type 06/1 available from Erntec (25/11/2008)

The ironless DC-Micromotor, Type 0615 measures 6mm in diametre, 15mm in length and weighs 2g. It is available from Erntec. The DC-Micromotors are available in nominal voltages of 1.5, 3 and 4.5VDC, with no-load speeds of ...

DC-Micromotors and Gearheads available from Erntec (24/11/2008)

With a diameter of only 26mm, a new family of precision miniature DC-Micromotors and Gearheads, which offers a compact high-performance drive package, is available from Erntec.

Microdrive system Ø 1.9mm available from Erntec (21/11/2008)

Microdrive system Ø 1.9 mm is a small Motor and Planetary Gearhead Ø 1.9mm produced in series for demanding microdrive applications. The objective of this development is to open up an entirely new field of applications, ...

DC-Micromotors, Encoders and Gearheads from Erntec (20/11/2008)

With a diameter of only 12mm, a whole new family of precision miniature in-line DC-Micromotors, Encoders and Gearheads, available from Erntec, offers a compact high-performance drive package for today's demanding market.

New 32mm drive system series available from Erntec (19/11/2008)

Erntec offer the new powerful miniature DC-Micromotors with an outside diameter of 32mm and lengths of 42mm and 57mm supplement the proven series of graphite-commutation FAULHABER motors from diameter 13 mm up to 38 mm.

M8/M12 I/O connectors distribution box available from Erntec (17/11/2008)

The M8/M12 I/O connectors distribution box is available from Erntec. The I/O modules are well accepted within industrial automation not least because they avoid parallel cabling and complex installation towards control units ...

The 3 module miniature enclosure for M36 DIN-Rail

3 Module Miniature Enclosure for M36 DIN-Rail from Erntec (11/11/2008)

The series 525 enclosures for M36 DIN-Rail mounting available from Erntec has 3 module. This enclosure series are designed for modern applications as for instance housing management equipment, relays for measurement, modular ...

The 2 module miniature enclosure for M36 DIN-Rail

2 module miniature enclosure for M36 DIN-Rail from Erntec (10/11/2008)

The series 350 enclosures for M36 DIN-Rail mounting available from Erntec has 2 module. This enclosure series are designed for modern applications as for instance housing management equipment, relays for measurement, modular ...

The 1 module miniature enclosure for M36 DIN-Rail

1 module miniature enclosure for M36 DIN-Rail available from Erntec (7/11/2008)

The series 175 enclosures for M36 DIN-Rail mounting from Erntec has 1 module. This enclosure series are designed for modern applications as for instance housing management equipment, relays for measurement, modular time ...

4 module miniature enclosures for M36 DIN-Rail from Erntec (6/11/2008)

The series 700 enclosures for M36 DIN-Rail mounting available from Erntec has 4 modules. These enclosure series are designed for modern applications as for instance housing management equipment, relays for measurement, modular ...

Series 1000 Sealed Miniature Enclosures (6/11/2008)

These enclosures meet the IP65 dust and hose-proof requirements.

Erntec offer IDG-B Miniature Enclosures for housing management and sensors (5/11/2008)

The IDG-B DIN miniature enclosures from Erntec are fully insulated and fulfil the requirements of the machinery and car industry. The enclosures have the installation width of 35 mm for the IDG-B2, 70 mm for the IDG-B4, ...

Erntec provide LDG-A – DIN rail miniature enclosure (4/11/2008)

The LDG-A miniature enclosures from Erntec are engineered for quick and easy installation for standard DIN-rail or screw mounting. These non-metallic enclosures are ideal for housing electrical, electronic and electromechanical ...

IDG-A miniature enclosures for home automation controls and decentralised automation available from Erntec (3/11/2008)

IDG-A miniature enclosures, available from Erntec, have been designed for modern applications in housing management equipment, measurement relays, modular time switches, light switching units and for modules in decentralised ...

LDG-S series of DIN Rail miniature enclosures available from Erntec (31/10/2008)

The LDG-S series of miniature enclosures, available from Erntec, are fully insulated enclosures according to the specifications of the machinery and the automotive industries.

MaxiBridge cable connectors available from Erntec (30/10/2008)

The MaxiBridge connector family, available from Erntec, is designed with four mechanical keying options in four different colours (red, green, black and blue) to provide fast, accurate installation that is completed with ...

Plug and Turn for circular connectors from Erntec (29/10/2008)

Erntec offer plug and turn for circular connectors, which provide the following advantages:Quick locking system for signal and power transmission in the field of device connection technology/drive engineering, measuring ...

Erntec offer THR pin headers (28/10/2008)

The THR pin headers available from Erntec are in accordance with the IEC 603-13 and are standard for the connection of printed circuit boards or between interfaces. The THR (Thru Hole Reflow) pin headers are designed for ...

Miniature enclosures for M36 DIN-rail from Erntec (27/10/2008)

Erntec distribute the series 450 miniature enclosure, which was developed for M36 DIN-rail fitting with the feature to fit PCBs inside the enclosure, as it is in standard edition fitted with several PCB tracks.

Erntec introduce miniature enclosures for wall mounting (24/10/2008)

The series 602 miniature enclosures from Erntec are designed for wall mounting. These enclosures are still fitted with the same bottom part as the two others with four taps for cold fixture of the PCB. However, the top part ...

Erntec provide PCI Express Right Angle Connector System (23/10/2008)

The Right Angle PCIe connector available from Erntec is identical to the standard vertical mount configuration. The connector pins are insert molded into the connector to allow for exact registration of the contacts on both ...

ConPower range of power and feedback connectors available from Erntec (23/10/2008)

Erntec’s ConPower is a complete connector family. The ConPower comprises power and feedback connectors and saves time for the connection of electrical drive components with transmission power up to 630 V and 150 A.

M58 Power Connectors available from Erntec (22/10/2008)

Coninvers expand their circular connector product programme by the power class M58 with metric screw locking for the cable connector and the cable connecting receptacle, available with the usual pin assignments 6-position ...

2- Component plastic bow- type handles available from Erntec (21/10/2008)

Erntec offer the 2- Component plastic bow- type handles. This new handle product line in 2-component design connects functionality and look through the choice of different materials.

Telecomms 19” cabinets available from Erntec (20/10/2008)

The 19 inch cabinet, available from Erntec, was built for Telecomms applications. This cabinet is made out of mild steel and has powder coated finish.

Mentor’s turning knob lighting set available from Erntec (17/10/2008)

Mentor’s new turning knob lighting set, available from Erntec, helps to get the right knack. The illumination unit makes it possible to see the exact setting of the knob, regardless of the ambient light.

Mentor's illuminated handles available from Erntec (16/10/2008)

Safe grip in the dark and indication of states and conditions Mentor's innovative illuminated bow-type handles offer real added value to the user. The illuminated handles are available from Erntec.

3mm horizontal multi-LEDs in SMD-technique from Erntec (15/10/2008)

Suitable for displaying switching status Mentor developed horizontal SMD components for 3mm LEDs. The 3mm horizontal multi-LEDs in SMD-technique are available from Erntec.

Coloured light guide system for front panel assembly from Erntec (14/10/2008)

Coloured light guides, manufactured by MENTOR, are available from Erntec. These coloured light guides are designed for transfer of light to the front panel.

Sensor actuator connectors available from Erntec (13/10/2008)

Erntec supply a range of sensor actuator connectors.

Quick Termination Piercecon connectors available from Erntec (10/10/2008)

With Quick Termination Piercecon connectors available from Erntec, normal circular cables can be attached to plug-in connectors, sensors, actuators, or field devices, without the need for supplementary specialist tools.

Vertical RoHS-compliant D-Sub connectors available from Erntec (9/10/2008)

Erntec supply the new vertical SMT D-Sub Series of connectors.

Fully insulated compact connector cable housings

KSG Series connector cable housings from Erntec (8/10/2008)

Erntec offer the KSG Series 173, 193, 200, 203, 253 connector cable housings. This cable housing family meets the demand for a fully insulated compact housing suitable for holding either the male or female half of connectors ...

Connivers' plastic moulded connectors available from Erntec (7/10/2008)

Connivers manufacture plastic-moulded connectors in many different versions. Available from Erntec, these connectors are manufactured depending on the cable specification, the cable length and the desired cable assembly.

Signal connectors available from Erntec (7/10/2008)

The signal connectors, available from Erntec, are all-purpose connectors that can be used for transmitting signal voltages in a frequency range from DC up to 100MHz with electric currents up to 20A.

Plastic moulded connectors available from Erntec (6/10/2008)

Connivers, suppliers of Erntec, manufacture plastic-moulded connectors in many different versions. Available from Erntec, these connectors are manufactured depending on the cable specification, the cable length and the desired ...

Wall mounting enclosures for room thermostats and sensors

Wall mounting enclosures with Knob Series 600 available from Erntec (6/10/2008)

Erntec offer wall mounting enclosures with the Knob Series 600. The miniature wall mounting enclosures are suitable for room thermostats and sensors. These wall mounting enclosures are self-extinguishing according to UL94-V0.

ECO Series 200 sealed enclosures available from Erntec (3/10/2008)

The ECO series 200 miniature sealed enclosures from Erntec are designed to IP65 specifications and are suitable for the electrical and electronic industries. The moulded ECO series 200 sealed enclosures are designed with ...

MicroStac 12 pin single row SMT Connector available from Erntec (3/10/2008)

The MicroStac 12 pin single row SMT Connector with 0.8mm pitch and with SMT termination, available from Erntec, is based on a hermaphroditic design. As a result, the male and the female connectors are identical.

Erntec supply Desk Top Miniature Enclosures Series 2000 (2/10/2008)

Erntec distribute Series 2000 Desk Top Miniature enclosures.

Power board for 19” cabinets available from Erntec (1/10/2008)

The power boards for 19” cabinets are available from Erntec. The power boards are capable of being mounted vertical or horizontal.

Erntec distribute Sloped Handheld Enclosures Series 1100 (30/09/2008)

Erntec distribute Series1100 miniature sloped handheld enclosures.

Air Filtered Fan Tray for 19 inch cabinets available from Erntec (29/09/2008)

Air Filtered Fan Trays for 19 inch cabinets are available from Erntec. The Air Filtered Fan Tray is a removable drawer that holds fans and fan-control circuitry.

Instrumentation Enclosures Series 400 available from Erntec (26/09/2008)

Erntec distribute 400 series of instrumentation enclosures.

Cable tray for 19” cabinets available from Erntec (26/09/2008)

Cable trays for 19” cabinets are available from Erntec. The cable trays can hold up and distribute cables in the cabinet.

Connector evaluation kits available from Erntec (25/09/2008)

Erntec offer two connector evaluation kits, the single line version (part no. 163210) and the multi-line version (part no. 163211).

ERmet ZD type 3 male connector from Erntec (24/09/2008)

Erntec offer the ERmet ZD type 3 male connector, which provides in the 10 wafer version 30 contact pairs (60 signal contacts and 30 ground contacts). This series supports three levels of sequential mating.

Erntec offer ERmet ZD type 2 male connector (23/09/2008)

The ERmet ZD type 2 male connector, available from Erntec, provides in the 10 wafer version 20 contact pairs (40 signal contacts and 20 ground contacts). This series supports three levels of sequential mating.

ERmet ZD type 4 male connector available from Erntec (22/09/2008)

The ERmet ZD type 4 male connector, available from Erntec, provides in the 10 wafer version 40 contact pairs (80 signal contacts and 40 ground contacts). This series supports three levels of sequential mating.

ERmet ZD type 4 female connector from Erntec (19/09/2008)

The ERmet ZD type 4 female connector, available from Erntec, provides in the 10 wafer version 20 contact pairs (80 signal contacts and 40 ground contacts).

Erntec offer ERmet ZD type 3 female connector (18/09/2008)

The ERmet ZD type 3 female connector, available from Erntec, provides in the 10 wafer version 20 contact pairs (60 signal contacts and 30 ground contacts).

ERmet ZD type 2 female connector available from Erntec (17/09/2008)

The ERmet ZD type 2 female connector, available from Erntec, provides in the 10 wafer version 20 contact pairs (40 signal contacts and 20 ground contacts).

ERmetZD connectors available from Erntec (16/09/2008)

The ERmetZD connectors, available from Erntec, easily integrate into existing backplane and subrack designs utilising the Hard Metric (HM), CompactPCI or Eurocard design standards.

RSS Feed

News sign up |

Collapse ERNTEC News

News sign up

EN3 line of connectors from Clarke & Severn Electronics now available for GPS and data acquisition applications (15/03/2010)

EN3 cord mounts with new strain relief EN3 right angle panel mounts now available from Clarke & Severn Electronics.

Harwin's Datamate connectors from Clarke & Severn Electronics extend high reliability choice (14/03/2010)

Harwin has further extended its 2.00mm pitch high reliability Datamate range to include mixed technology connectors with jackscrews, all available from Clarke & Severn Electronics.

ODU Ethernet MAC connectors now available from Clarke & Severn Electronics (13/03/2010)

Ethernet MAC connectors from Clarke & Severn Electronics are modules that transmits data in the ODU MAC LC modular connector and that makes it possible to connect Ethernet lines to the modular system.

ODU connectors from Clarke & Severn Electronics are now certified to medical standards (12/03/2010)

In order to better satisfy the wishes of customers in the medical technology segment, ODU connectros, available from Clarke & Severn Electronics, have now also been certified to ISO 13485 : 2003 + AC: 2007.

ODU SPC single power connectors from Clarke & Severn Electronics are economical and rugged (11/03/2010)

The ODU SPC single power connector product series, available from Clarke & Severn Electronics, are used for applications in regenerative energies, industrial systems and switching stations.

RSS Feed

News sign up

Sections

Cabinets
Clutches
Connectors

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.

SMC 1.27 mm connector system for SMT available from Erntec

More products from ERNTEC

ERNTEC News

Related Articles

Sections