Erntec offer plug and turn for circular connectors, which provide the following advantages:
- Quick locking system for signal and power transmission in the field of device connection technology/drive engineering, measuring technology and medical technology. Low effort needed for locking (can be handled with two fingers).
- ‘Blind’ plugging and unplugging result in easy handling under cramped or ‘non-viewable’ assembly conditions.
- Device flanges can be combined optionally with Speedcon cable connector or with standard cable connector without any restrictions.
With Erntec’s plug and turn for circular connectors, the plug pairs can be plugged and locked without long screwing.
The correct plug-in position of both circular connectors is clear and can be found easily. For the identification of the correct plug-in position, the coupling nut is turned to its initial position at the mechanical stop to the left.
The initial position is then marked by an arrow symbol. After plugging the circular connectors, they are locked by turning the coupling nut by approximately a half rotation to the right until reaching the mechanical stop.
The handling of circular connectors is easy. Once locked, an O-ring secures the coupling nut at its position and prevents loosening caused by vibrations.