Erntec distribute Sloped Handheld Enclosures Series 1100

By ERNTEC

Got a Question for ERNTEC?

Sloped Handheld Enclosures Series 1100

Erntec distribute Series1100 miniature sloped handheld enclosures. These miniature enclosures are ideal for keyboard, controllers, test instruments, computer accessories, remote actuators and controls. The miniature enclosures supplied by Erntec are available in customised sizes and shapes.

Erntec’s Sloped Handheld Enclosures Series 1100 have the following design features:

Moulded in high impact ABS plastic
Type 1189 (BAT) is available with battery compartment

30/09/2008 12:00 AM

Got a question about this product

More information about this product

Contact Details

Send to a friend

Contact ERNTEC

By sending this enquiry you will also be informed of other related opportunities.

* First Name

Surname

Phone

* Your Email

State

Message

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

Get new security code

* does not match

Send Enquiry

More products from ERNTEC

Precision Machining Services from Erntec

Erntec Precision Routing Erntec offer precision routing, punching and folding services for mechanical packaging. Erntec machining centre offers economic milling, drilling, counter boring, counter sinking and engraving ...

Enquire Now

Connector Solutions from Erntec

Erntec offers a range of European precision connectors (also know as sub racks) encompassing specific mechanical requirements to EMI/shielding considerations and press fit of connectors on the backplane. ERNI PCB and I/O ...

Enquire Now

Subrack / Card Frame Solutions from Erntec

Erntec offers custom mechanical design and assembly of card frames (also know as subracks). Encompassing specific mechanical requirements to EMI/shielding considerations and press fit of connectors on the backplane. ...

Enquire Now

Fieldbus and Profibus Solutions from Erntec

Erntec offers custom mechanical design and assembly of card frames (also known as subracks). Encompassing specific mechanical requirements to EMI/shielding considerations and press fit of connectors on the backplane. ...

Enquire Now

Miniature Enclosure Solutions from Erntec

Erntec offers quality DIN rail, wall mount and standalone enclosures. Along side the flexibility of customisation, Erntec can provide the perfect tailored solution for PCB/equipment packaging requirements. Bernic offers ...

Enquire Now

Miniature Drive Solutions from Erntec

Faulhaber servo amplifiers and full motion controllers are optimized for each type of drive system (from DC motors to brushless DC to micro systems). Faulhaber linear controllers and motion controllers are optimized ...

Enquire Now

Optical Electronic Solutions from Erntec

Erntec has access to high quality optoelectronic solutions from Mentor Germany. From standard LED to custom light guide systems Erntec can offer a wide range of options to give any project a reliable and professional finish. ...

Enquire Now

LED Light Guide Systems from Erntec

Mentors M-TUBE is the first LED light guide system that provides perfectly homogeneous light to the environment with just two LEDs. LED light enters at the ends of a clear guide bar and is disipitated in a targeted way ...

Enquire Now

Custom Cabinet and Large Enclosure Solutions from Erntec

Erntec has a reputation for superior tailored design in this area. Their experienced team combines modern tools (3D-CAD design) and manufacturing know how to provide practical solutions to match any budget. 19” ...

Enquire Now

Miniature Motor Drives from Erntec

Erntec offers Faulhaber drive technology a global network of companies renowned for their expertise in drive, precision and micro systems. Faulhaber products are designed to meet demanding requirements in all fields of ...

Enquire Now

News sign up

Additional ERNTEC News

Customised welded cabinets by ERNTEC (29/08/2009)

Erntec manafacture fully welded cabinets in a variety of construction materials.

19” desktop enclosure from ERNTEC (28/08/2009)

The InterMeZo housing is based on a frame work construction composed of profiles and angle connectors.

Vertical male connectors: 4 Pair cable headers from ERNTEC (27/08/2009)

Cable assembly from ERNTEC.

Ermet ZD connector cable system (26/08/2009)

ERmet ZD Cable Assemblies allow high speed digital signals to be transmitted further and with superior signal fidelity.

Push button cap line 2271 SMD short travel keys (25/08/2009)

The new illuminable push button cap line 2271 by MENTOR has been designed for the use with SMD short-travel keys such as those that are found with key pads.

C-HC stamped-rolled crimp contacts from Erntec (24/08/2009)

High performance for cost-effective processing

M-TUBE high brightness (20/08/2009)

Unlike conventional LED strips which emit isolated, lined up spots of light the M-TUBE is the first LED light guide system that dissipitates light perfectly homogeneous to the environment.

M-TUBE Flex by Erntec (19/08/2009)

The M-TUBE is an LED light system designed as a construction set

Magnetic Encoders Series IE3-256 (L) Combination with DC- Micromotors (4/08/2009)

The new incremental encoders of the IE3-256 (L) series are designed specially for combination with motors from the CR and CXR series and controllers of the SC 2804 or MCDC 30xx series.

Panel mounting connector with knurled nut from Erntec (4/08/2009)

Panel mounting connectors with knurled nuts make system parts and control cabinets "pluggable". A new variant - the Y4 style - now expands the product range of the modular M23 signal connectors of the RC series.

Brushless DC- Motor with integrated encoder and servo controller (4/08/2009)

The Brushless DC- Motor with integrated Encoder and Servo Controller features precision run with low speeds.

MiniBridge Cable-to-Cable Connection (27/07/2009)

The ERNI MiniBridge product line opens the door for several additional fields of application.

ERNI Electronics Offers a Broad Portfolio of DIN-Rail-Enclosures for Industrial and Building Automation (17/07/2009)

ERNI Electronics continues to expand its popular and well-established 1.27mm SMC connector family with new adapters.

Brushless micromotors available from ERNTEC (20/05/2009)

Brushless micromotors, available from ERNTEC, feature Smovvy technology.

FAULHABER drive electronics available from ERNTEC (19/05/2009)

FAULHABER drive electronics, available from ERNTEC, are specifically designed for controlling FAULHABER motors. Motion controllers and amplifiers offer a range of controlling options for torque, speed

FAULHABER incremental shaft encoders available from Erntec (18/05/2009)

FAULHABER offer incremental shaft encoders for use with DC motors and brushless DC servomotors to indicate and control shaft velocity, direction of rotation and positioning. These incremental shaft en

New planetary gearhead 32A series available from Erntec (8/05/2009)

The new planetary gearheads of the 32A series, available from Erntec, come in one to four stage variants and are available in 17 finely graduated reduction ratios from 4:1 to 2076:1.

IE3-256 (L) series incremental encoders available from ERNTEC (7/05/2009)

IE3-256 (L) series incremental encoders, available from ERNTEC, feature robust housings and a compact 22 x 18mm format. These are designed to combine with motors from the CR and CXR series and controllers of the SC 2804 ...

FAULHABER 2237 CXR DC motor series available from ERNTEC (6/05/2009)

FAULHABER offer ultra-miniature 2237 CXR DC motor series, which are graphite commutated motors and is an addition to their drive range. The 2237 CXR DC motor series, available from ERNTEC, was developed on the basis of the ...

ERbic bus systems available from ERNTEC (5/05/2009)

For different ERbic bus systems, the interface connectors combine compact dimensions with horizontal or vertical cable termination. ERbic bus systems are available from ERNTEC. The colour coding describes different bus systems, ...

ERNI Electronics MicroStac connectors with 10 and 54 pins available from ERNTEC (4/05/2009)

ERNI Electronics have expanded their 0.8mm MicroStac SMT connector series to include a 10 (single row) and 54 pin (dual row) version. The MicroStac SMT connector series, available from ERNTEC, is based on a hermaphroditic ...

ERmet line of connectors available from Erntec (1/05/2009)

ERmet line of connectors, available from Erntec, offers performance and flexibility for today's system designs. With constant technical advancements and expansions, this series of connectors supports any possible arrangement ...

Board-to-cable connectors available from Erntec (30/04/2009)

Erntec's LPV family of IEC 60603-13 (DIN 41651) compliant connectors offers a spectrum of board-to-cable connectors with a 2.54mm pitch.

Power tap connectors for connecting power supply lines available from Erntec (29/04/2009)

Two-row power taps featuring either an elastic pressfit zone or soldering termination were developed by Erntec for connecting power supply lines. Cable plugs or terminal sockets can be optionally used for cable termination.

Erntec unveil illuminated tray handle system (6/04/2009)

Erntec launched the illuminated tray handle system, which allows several options in the customer specific handling.

Industrial circular connectors with quick locking system available from Erntec (3/04/2009)

Coninvers circular connectors of the series ConPower P20 (M17) and ConPower P70 (M40) is available from Erntec.

Modular M23 signal connectors available from Erntec (2/04/2009)

Panel mounting connectors with knurled nuts make system parts and control cabinets ‘pluggable’.

Coninvers M16 circular signal connectors available from Erntec (1/04/2009)

Coninvers M16 circular signal connectors, available from Erntec, come with terminated cables, assembled and plastic-moulded and are extended by pin connectors and flanges. The production of connectors with a number of positions ...

LDG-S4 DIN Rail enclosures available from Erntec (31/03/2009)

The LDG-S series of DIN Rail enclosures, available from Erntec, are insulated enclosures according to the specifications of the machinery and automotive industries.

LDG-S2 DIN Rail enclosures available from Erntec (30/03/2009)

The LDG-S series of DIN Rail enclosures are insulated enclosures according to the specifications of the machinery and the automotive industries. The LDG-S series of DIN Rail enclosures are designed for easy snap-on assembly ...

Series 3564 brushless DC-servomotors with motion controller available from Erntec (27/03/2009)

Erntec offer series 3564 brushless DC-servomotors. These brushless DC-servomotors with integral motion controller provide a range of functions and enhanced performance. Series 3564 brushless DC-servomotors are optionally ...

The QUICKSHAFT Linear DC-Servomotor LM 1247

QUICKSHAFT Linear DC-Servomotors series LM 1247 available from Erntec (26/03/2009)

The newly developed Linear DC-Servomotor series LM 1247, available from Erntec, measures 12.5 x 47mm and weighs 56g. This actuator can produce a peak force of up to 9,4 N at full power. The standard p

2057 series brushless DC-Servomotor available from Erntec (25/03/2009)

Brushless DC-Servomotors Series 2057…B, available from Erntec, offer high power-to-volume ratio. The brushless motor is fitted with a high-energy, rare earth magnet, which results in a responsive mech

SMD components for 3mm-LEDs available from Erntec (24/03/2009)

Mentor have developed a horizontal SMD component for 3mm-LEDs that is suitable as switching status indicators. The housing caters for one as well as for two duo LEDs. The SMD component for 3mm-LEDs, a

Mentor Dynamism keyboards available from Erntec (23/03/2009)

Mentor's new Dynasim keyboard, available from Erntec, is flexibly designed, resistant to environmental influences and has an adjustable operating force. The Dynasim keyboard is robust and belongs to a

Mentor capacitive switches available from Erntec (20/03/2009)

The capacitive switch developed by Mentor and available from Erntec, belongs to a family of sensors. As the capacitive switch has been conceived for ‘no contact’ or ‘soft touch’ switches, where depressing a mechanical button ...

MicroSpeed Blind Mate Connectors available from Erntec (13/03/2009)

ERNI’s 10 Gbit/s MicroSpeed Blind Mate connector housing comes along with thicker side walls and is manufactured of high impact resistant thermoplastic UL94 V-0 rated LCP. The housing provides two polarised guide elements ...

Mentor’s LED testers available from Erntec (3/02/2009)

Mentor’s new LED tester, available from Erntec, provides fast, easy and reliable testing of SMD and THT LEDs. The device is useful for checking individual LEDs with varying specs and for comparative measuring of different ...

Mentor SMD-Light guides available from Erntec (2/02/2009)

The Mentor SMD-Light guides, available from Erntec, achieve an optimal luminous efficacy on the radiation area and avoid mixed instrumentation of THT- and SMD-components on the pcb (printed circuit board).

Mentor’s Dynasim keyboard available from Erntec (30/01/2009)

Mentor’s new Dynasim keyboard is flexibly designed, resistant to environmental influences and available with an adjustable operating force. Dynasim is the new version of the familiar low-profile keyboard with high end features. ...

Mentor M-Tube light guide bar available from Erntec (29/01/2009)

The M-Tube light guide bar, available from Erntec, consists of a modular design with the single elements light guide, accompanying clamping sleeve, housing equipped with an LED and a second equipped housing for the double ...

Illuminated tray handle systems available from Erntec (28/01/2009)

The outside tray handle system, available from Erntec, allows several options in the customer specific handling. The tray handle system can be used wherever there is no space for an integrated tray handle.

Mentor’s opto-electronic constructional elements with switch and key functions available from Erntec (27/01/2009)

Mentor have developed opto-electronic constructional elements with switch and key functions, which is based on the principle of light reflection. The opto-electronic constructional elements are available from Erntec.

Light guide junction available from Erntec (26/01/2009)

Light guide junction, available from Erntec, can be connected to one, two or three SMD LEDs and type 0805 or smaller.

SMD press switch and push button systems available from Erntec (23/01/2009)

The SMD component, available from Erntec, is mountable as a front panel component as well as directly on circuit cards and can be used in various applications. The SMD component is available as a push button and press switch ...

Single and two-row connectors equipped with 6 to 54 pins

MicroStac single and two row connectors available from Erntec (22/01/2009)

ERNI Electronics have expanded their 0.8mm MicroStac SMT connector series to include a 10-pin (single row) and 54-pin (dual row) version. The MicroStac advantage is based on a patented hermaphroditic design, a special design ...

New design concept of SMARTSHELL brushless DC-Servomotors available from Erntec (20/01/2009)

Faulhaber Group, represented by Erntec in Australia, have introduced a new design series SMARTSHELL Brushless DC-Servomotors.

Unidirectional single phase stepper motors available from Erntec (12/01/2009)

ARSAPE have released two new stepper motors suitable for applications where µA (Micro-Ampere) current consumption is the key requirement. These stepper motors series ASP, available from Erntec, are designed to offer minimum ...

MiniBridge 1.27mm single row connectors available from Erntec (9/01/2009)

The MiniBridge, a single-row, 1.27mm pitch SRC connector system, available from Erntec, is suitable for space-saving board to cable connections.

Precision Gearheads available from Erntec (3/12/2008)

Erntec offer a range of Precision Gearheads made by FAULHABER.

FTB miniature drive systems available in Erntec (2/12/2008)

Thin profile DC motors from Erntec are slim and therefore ideal for applications with a minimum of space.

AM 2224 compact power house stepper motor

Compact power house stepper motor AM 2224 available from Erntec (1/12/2008)

The 2-phase miniature stepper motor, available from Erntec, has a diameter of 22mm and a high power-to-volume ratio. In order to also have the advantages of this motor technology where more torque is required, the AM 2224 ...

ARSAPE stepper motors available from Erntec (28/11/2008)

ARSAPE offer stepper motors with lead screws or hollow shafts. These stepper motors are available from Erntec.

4490 BS series and 4490 B series of DC-servomotors

4490 BS series DC-servomotors available from Erntec (27/11/2008)

The 4490 BS series DC-servomotors are available from Erntec. Externally there is no difference between the ‘B’ series motors and the new ‘BS’ series.

FAULHABER Group’s miniature drive systems available from Erntec (26/11/2008)

FAULHABER Group, represented by Erntec in Australia, offer power-efficient series of miniature drive systems. Three Hall sensors detect the position of the rotor by evaluating its magnetic field, which, with their output ...

DC-Micromotor Type 0615 and Planetary Gearhead Type 06/1 available from Erntec (25/11/2008)

The ironless DC-Micromotor, Type 0615 measures 6mm in diametre, 15mm in length and weighs 2g. It is available from Erntec. The DC-Micromotors are available in nominal voltages of 1.5, 3 and 4.5VDC, with no-load speeds of ...

DC-Micromotors and Gearheads available from Erntec (24/11/2008)

With a diameter of only 26mm, a new family of precision miniature DC-Micromotors and Gearheads, which offers a compact high-performance drive package, is available from Erntec.

Microdrive system Ø 1.9mm available from Erntec (21/11/2008)

Microdrive system Ø 1.9 mm is a small Motor and Planetary Gearhead Ø 1.9mm produced in series for demanding microdrive applications. The objective of this development is to open up an entirely new field of applications, ...

DC-Micromotors, Encoders and Gearheads from Erntec (20/11/2008)

With a diameter of only 12mm, a whole new family of precision miniature in-line DC-Micromotors, Encoders and Gearheads, available from Erntec, offers a compact high-performance drive package for today's demanding market.

New 32mm drive system series available from Erntec (19/11/2008)

Erntec offer the new powerful miniature DC-Micromotors with an outside diameter of 32mm and lengths of 42mm and 57mm supplement the proven series of graphite-commutation FAULHABER motors from diameter 13 mm up to 38 mm.

SMC 1.27 mm connector system for SMT available from Erntec (18/11/2008)

ERNI SMC 1.27mm connectors from Erntec are the answer for applications where space is at a premium and packaging density and high-speed performance are a necessity.

M8/M12 I/O connectors distribution box available from Erntec (17/11/2008)

The M8/M12 I/O connectors distribution box is available from Erntec. The I/O modules are well accepted within industrial automation not least because they avoid parallel cabling and complex installation towards control units ...

The 3 module miniature enclosure for M36 DIN-Rail

3 Module Miniature Enclosure for M36 DIN-Rail from Erntec (11/11/2008)

The series 525 enclosures for M36 DIN-Rail mounting available from Erntec has 3 module. This enclosure series are designed for modern applications as for instance housing management equipment, relays for measurement, modular ...

The 2 module miniature enclosure for M36 DIN-Rail

2 module miniature enclosure for M36 DIN-Rail from Erntec (10/11/2008)

The series 350 enclosures for M36 DIN-Rail mounting available from Erntec has 2 module. This enclosure series are designed for modern applications as for instance housing management equipment, relays for measurement, modular ...

The 1 module miniature enclosure for M36 DIN-Rail

1 module miniature enclosure for M36 DIN-Rail available from Erntec (7/11/2008)

The series 175 enclosures for M36 DIN-Rail mounting from Erntec has 1 module. This enclosure series are designed for modern applications as for instance housing management equipment, relays for measurement, modular time ...

4 module miniature enclosures for M36 DIN-Rail from Erntec (6/11/2008)

The series 700 enclosures for M36 DIN-Rail mounting available from Erntec has 4 modules. These enclosure series are designed for modern applications as for instance housing management equipment, relays for measurement, modular ...

Series 1000 Sealed Miniature Enclosures (6/11/2008)

These enclosures meet the IP65 dust and hose-proof requirements.

Erntec offer IDG-B Miniature Enclosures for housing management and sensors (5/11/2008)

The IDG-B DIN miniature enclosures from Erntec are fully insulated and fulfil the requirements of the machinery and car industry. The enclosures have the installation width of 35 mm for the IDG-B2, 70 mm for the IDG-B4, ...

Erntec provide LDG-A – DIN rail miniature enclosure (4/11/2008)

The LDG-A miniature enclosures from Erntec are engineered for quick and easy installation for standard DIN-rail or screw mounting. These non-metallic enclosures are ideal for housing electrical, electronic and electromechanical ...

IDG-A miniature enclosures for home automation controls and decentralised automation available from Erntec (3/11/2008)

IDG-A miniature enclosures, available from Erntec, have been designed for modern applications in housing management equipment, measurement relays, modular time switches, light switching units and for modules in decentralised ...

LDG-S series of DIN Rail miniature enclosures available from Erntec (31/10/2008)

The LDG-S series of miniature enclosures, available from Erntec, are fully insulated enclosures according to the specifications of the machinery and the automotive industries.

MaxiBridge cable connectors available from Erntec (30/10/2008)

The MaxiBridge connector family, available from Erntec, is designed with four mechanical keying options in four different colours (red, green, black and blue) to provide fast, accurate installation that is completed with ...

Plug and Turn for circular connectors from Erntec (29/10/2008)

Erntec offer plug and turn for circular connectors, which provide the following advantages:Quick locking system for signal and power transmission in the field of device connection technology/drive engineering, measuring ...

Erntec offer THR pin headers (28/10/2008)

The THR pin headers available from Erntec are in accordance with the IEC 603-13 and are standard for the connection of printed circuit boards or between interfaces. The THR (Thru Hole Reflow) pin headers are designed for ...

Miniature enclosures for M36 DIN-rail from Erntec (27/10/2008)

Erntec distribute the series 450 miniature enclosure, which was developed for M36 DIN-rail fitting with the feature to fit PCBs inside the enclosure, as it is in standard edition fitted with several PCB tracks.

Erntec introduce miniature enclosures for wall mounting (24/10/2008)

The series 602 miniature enclosures from Erntec are designed for wall mounting. These enclosures are still fitted with the same bottom part as the two others with four taps for cold fixture of the PCB. However, the top part ...

ConPower range of power and feedback connectors available from Erntec (23/10/2008)

Erntec’s ConPower is a complete connector family. The ConPower comprises power and feedback connectors and saves time for the connection of electrical drive components with transmission power up to 630 V and 150 A.

Erntec provide PCI Express Right Angle Connector System (23/10/2008)

The Right Angle PCIe connector available from Erntec is identical to the standard vertical mount configuration. The connector pins are insert molded into the connector to allow for exact registration of the contacts on both ...

M58 Power Connectors available from Erntec (22/10/2008)

Coninvers expand their circular connector product programme by the power class M58 with metric screw locking for the cable connector and the cable connecting receptacle, available with the usual pin assignments 6-position ...

2- Component plastic bow- type handles available from Erntec (21/10/2008)

Erntec offer the 2- Component plastic bow- type handles. This new handle product line in 2-component design connects functionality and look through the choice of different materials.

Telecomms 19” cabinets available from Erntec (20/10/2008)

The 19 inch cabinet, available from Erntec, was built for Telecomms applications. This cabinet is made out of mild steel and has powder coated finish.

Mentor’s turning knob lighting set available from Erntec (17/10/2008)

Mentor’s new turning knob lighting set, available from Erntec, helps to get the right knack. The illumination unit makes it possible to see the exact setting of the knob, regardless of the ambient light.

Mentor's illuminated handles available from Erntec (16/10/2008)

Safe grip in the dark and indication of states and conditions Mentor's innovative illuminated bow-type handles offer real added value to the user. The illuminated handles are available from Erntec.

3mm horizontal multi-LEDs in SMD-technique from Erntec (15/10/2008)

Suitable for displaying switching status Mentor developed horizontal SMD components for 3mm LEDs. The 3mm horizontal multi-LEDs in SMD-technique are available from Erntec.

Coloured light guide system for front panel assembly from Erntec (14/10/2008)

Coloured light guides, manufactured by MENTOR, are available from Erntec. These coloured light guides are designed for transfer of light to the front panel.

Sensor actuator connectors available from Erntec (13/10/2008)

Erntec supply a range of sensor actuator connectors.

Quick Termination Piercecon connectors available from Erntec (10/10/2008)

With Quick Termination Piercecon connectors available from Erntec, normal circular cables can be attached to plug-in connectors, sensors, actuators, or field devices, without the need for supplementary specialist tools.

Vertical RoHS-compliant D-Sub connectors available from Erntec (9/10/2008)

Erntec supply the new vertical SMT D-Sub Series of connectors.

Fully insulated compact connector cable housings

KSG Series connector cable housings from Erntec (8/10/2008)

Erntec offer the KSG Series 173, 193, 200, 203, 253 connector cable housings. This cable housing family meets the demand for a fully insulated compact housing suitable for holding either the male or female half of connectors ...

Connivers' plastic moulded connectors available from Erntec (7/10/2008)

Connivers manufacture plastic-moulded connectors in many different versions. Available from Erntec, these connectors are manufactured depending on the cable specification, the cable length and the desired cable assembly.

Signal connectors available from Erntec (7/10/2008)

The signal connectors, available from Erntec, are all-purpose connectors that can be used for transmitting signal voltages in a frequency range from DC up to 100MHz with electric currents up to 20A.

Plastic moulded connectors available from Erntec (6/10/2008)

Connivers, suppliers of Erntec, manufacture plastic-moulded connectors in many different versions. Available from Erntec, these connectors are manufactured depending on the cable specification, the cable length and the desired ...

Wall mounting enclosures for room thermostats and sensors

Wall mounting enclosures with Knob Series 600 available from Erntec (6/10/2008)

Erntec offer wall mounting enclosures with the Knob Series 600. The miniature wall mounting enclosures are suitable for room thermostats and sensors. These wall mounting enclosures are self-extinguishing according to UL94-V0.

ECO Series 200 sealed enclosures available from Erntec (3/10/2008)

The ECO series 200 miniature sealed enclosures from Erntec are designed to IP65 specifications and are suitable for the electrical and electronic industries. The moulded ECO series 200 sealed enclosures are designed with ...

MicroStac 12 pin single row SMT Connector available from Erntec (3/10/2008)

The MicroStac 12 pin single row SMT Connector with 0.8mm pitch and with SMT termination, available from Erntec, is based on a hermaphroditic design. As a result, the male and the female connectors are identical.

Erntec supply Desk Top Miniature Enclosures Series 2000 (2/10/2008)

Erntec distribute Series 2000 Desk Top Miniature enclosures.

Power board for 19” cabinets available from Erntec (1/10/2008)

The power boards for 19” cabinets are available from Erntec. The power boards are capable of being mounted vertical or horizontal.

Air Filtered Fan Tray for 19 inch cabinets available from Erntec (29/09/2008)

Air Filtered Fan Trays for 19 inch cabinets are available from Erntec. The Air Filtered Fan Tray is a removable drawer that holds fans and fan-control circuitry.

Instrumentation Enclosures Series 400 available from Erntec (26/09/2008)

Erntec distribute 400 series of instrumentation enclosures.

Cable tray for 19” cabinets available from Erntec (26/09/2008)

Cable trays for 19” cabinets are available from Erntec. The cable trays can hold up and distribute cables in the cabinet.

Connector evaluation kits available from Erntec (25/09/2008)

Erntec offer two connector evaluation kits, the single line version (part no. 163210) and the multi-line version (part no. 163211).

ERmet ZD type 3 male connector from Erntec (24/09/2008)

Erntec offer the ERmet ZD type 3 male connector, which provides in the 10 wafer version 30 contact pairs (60 signal contacts and 30 ground contacts). This series supports three levels of sequential mating.

Erntec offer ERmet ZD type 2 male connector (23/09/2008)

The ERmet ZD type 2 male connector, available from Erntec, provides in the 10 wafer version 20 contact pairs (40 signal contacts and 20 ground contacts). This series supports three levels of sequential mating.

ERmet ZD type 4 male connector available from Erntec (22/09/2008)

The ERmet ZD type 4 male connector, available from Erntec, provides in the 10 wafer version 40 contact pairs (80 signal contacts and 40 ground contacts). This series supports three levels of sequential mating.

ERmet ZD type 4 female connector from Erntec (19/09/2008)

The ERmet ZD type 4 female connector, available from Erntec, provides in the 10 wafer version 20 contact pairs (80 signal contacts and 40 ground contacts).

Erntec offer ERmet ZD type 3 female connector (18/09/2008)

The ERmet ZD type 3 female connector, available from Erntec, provides in the 10 wafer version 20 contact pairs (60 signal contacts and 30 ground contacts).

ERmet ZD type 2 female connector available from Erntec (17/09/2008)

The ERmet ZD type 2 female connector, available from Erntec, provides in the 10 wafer version 20 contact pairs (40 signal contacts and 20 ground contacts).

ERmetZD connectors available from Erntec (16/09/2008)

The ERmetZD connectors, available from Erntec, easily integrate into existing backplane and subrack designs utilising the Hard Metric (HM), CompactPCI or Eurocard design standards.

ERmet zeroXT connectors available from Erntec (15/09/2008)

ERNI’s new ERmet zeroXT Connector System with 100 Ohm matched differential impedance for enhanced signal integrity, available from Erntec, is suitable for modern high speed backplane designs with data transmission rates ...

MicroStac 50 pin single row SMT Connector from Erntec (12/09/2008)

The MicroStac 6 pin single row SMT Connector with 0.8mm pitch and with SMT termination, available from Erntec, is based on a hermaphroditic design.

MicroStac 6 pin single row SMT Connector from Erntec (11/09/2008)

The MicroStac 6 pin single row SMT Connector with 0.8mm pitch and with SMT termination, available from Erntec, is based on a hermaphroditic design.

AM 2224 miniature Stepper Motor available from Erntec (10/09/2008)

The new 2-phase miniature Stepper Motor, available from Erntec, has a diameter of 22mm and a high power-to-volume ratio.

Smoovy series 0515 ... B brushless DC micromotor from Erntec (9/09/2008)

Despite compact dimensions of 5mm outer diameter and a length of 15mm, the new smoovy series 0515 ... B, available from Erntec, offers ample power, with minimal current consumption.

SC 1801 and SC 2804 series of software-controlled PI controller from Erntec (8/09/2008)

The new SC 1801 and SC 2804 series of software-controlled PI controller, available from Erntec, enables the universal operation, with one and the same controller, of either electronically commutated drives (BL) or brush-type ...

Erntec’s vented slimline shelve (5/09/2008)

Erntec’s vented slimline shelve supports weights up to 30kg. It is supplied with mounting hardware and can be made to depths of 600mm, 700mm or 800mm.

Erntec’s fan roof assembly (4/09/2008)

Erntec’s fan roof assembly helps to draw cool air near the cabinet base and exhaust the hot air through the cabinet roof.

ASP series of Miniature Stepper Motors from Erntec (3/09/2008)

The ASP series of Miniature Stepper Motors, available from Erntec, offers system designers that use battery, capacitor or solar cell based power to include, along with their low consumption processors, mechanical functions ...

Motion controllers for brush and brushless DC-Motors from Erntec (2/09/2008)

The compact FAULHABER motion controllers, available from Erntec, are now more efficient and can be optionally operated through a RS232 or CAN interface.

Vertical PDU for 19” cabinets available from Erntec (1/09/2008)

Vertical PDU in metal duct for 19” cabinets is available from Erntec. Erntec offer a wide range of cabinet accessories to suit customer’s requirements.

Brushless DC-Servomotors from Erntec (29/08/2008)

The high power-to-volume ratio and the advantages of electronic commutation make the new brushless DC-Servomotor series 2057 ... B, available from Erntec, an absolute power-pack in this frame size.

Electrical 19 inch cabinets from Erntec (28/08/2008)

Erntec offer cabinets for the Electrical industry. Erntec provide 19 inch cabinet built for transmission and distribution.

Scientific 19 inch cabinets from Erntec (27/08/2008)

Erntec offer cabinets for the scientific industry. Erntec provide 19 inch cabinet built for gas analysis. This cabinet is made out of mild steel and aluminium.

Welded cabinets from Erntec (26/08/2008)

The welded cabinets, from Erntec, offer higher IP protection rating and are generally used in aggressive or outdoor environments.

Enhanced SMC board-to-board adapter from Erntec (25/08/2008)

The new SMC board-to-board-adapter, from ERNI Electronics, is an addition to the extensive SMC 1.27mm (.050") pitch connector line, offering flexibility in its board-to-board heights ranging from 20mm to 40mm in 2mm increments.

Enhanced right angled female DIN connectors from Erntec (22/08/2008)

ERNI’s new family of right angled DIN 41612 connectors is available, from Erntec, in type R, R/2 and R/3 variants.

19 inch cabinets for defence applications from Erntec (21/08/2008)

Erntec offer cabinets for the Defence industry. Erntec offer 19 inch cabinet for switiching equipment/ vibration environment.

19 inch cabinets for computer applications from Erntec (20/08/2008)

Erntec offer cabinets for the computer industry. The 19 inch cabinet, from Erntec, is built computer server applications.

The ADM1220 stepper motor from Erntec (19/08/2008)

The ADM1220 motor, from Erntec, offers 20 full-steps per revolution. Due to its optimum sinusoidal torque it is fully micro-stepping compatible.

Brushless DC-motor with integrated encoder from Erntec (18/08/2008)

Erntec present a new addition to their miniature drive system range. The new brushless thin-profile micromotor with integrated encoder features broad speed range, with high-precision control allowing minimal speeds without ...

Micromotor series drives with integrated encoder

Micromotor series of drives with integrated encoder from Erntec (15/08/2008)

The two new thin-profile micromotor series with integrated encoder, from Erntec, are 2.3mm longer than the standard versions.

SRC connector system available from Erntec (14/08/2008)

The small size of the single-row, 1.27mm pitch SRC connector system makes it suitable for space-saving board to cable connections. The SRC connector system, available from Erntec, can be used in a wide range of applications ...

D-Sub High Power Connectors 7W2 available from Erntec (13/08/2008)

The D-Sub High Power Connectors 7W2, available from Erntec, were built as pure high current versions or as mixed connectors which are also loaded with signal contacts.

MicroSpeed Power Module Connectors available from Erntec (12/08/2008)

The MicroSpeed Power Module Connectors, available from Erntec, with 2.0mm contact pitch fulfils the need for miniaturised and high reliability power systems and offers a large number of options for mezzanine applications. ...

DIN 41612 / IEC 60603-2 female DIN connectors from Erntec (11/08/2008)

Erntec offer their range of ERNI female DIN connectors. The DIN 41612 / IEC 60603-2 female DIN connectors offer several advantages.

ERNI pin header and socket strip from Erntec (8/08/2008)

The ERNI pin header range, available from Erntec, offers several possibilities to users who need to connect two PCBs which are arranged on top of each other or to attach connecting cables to PCBs inside the equipment.

SafetyBUS p Connectors available from Erntec (7/08/2008)

The SafetyBUS p Connectors, from Erntec, utilises the advantages of the CAN bus. A protocol has been developed by Pilz that satisfies safety engineering requirements.

Profibus Ex i connectors from Erntec (6/08/2008)

Erntec offers a special Profibus specification for safety-orientated intrinsically safe applications. Intrinsic safety is achieved by limiting the energy. At low voltage, this is reflected, among other things, by a higher ...

Profibus connectors available from Erntec (5/08/2008)

Profibus is a widely used field bus. The IP 20 interface on the device side is standardised as a 9-pin D-Sub female connector. With its comprehensive program, Erntec provides customers with various options.

19” Desktop Enclosure available from Erntec (4/08/2008)

19” Desktop Enclosure is available from Erntec. The InterMeZo housing is based on a frame work construction composed of profiles and angle connectors. Flexible design permits the assembly of individual sizes in a quick and ...

ERbic MAX CAN Switch Connectors from Erntec (1/08/2008)

The ERbic MAX CAN Switch Connector, from Erntec, designates the metal version with axial cable outlet. A special feature of the ERbic MAX CAN Switch Connector is the robust diecast metal housing, making it ideal for applications ...

CAN-Bus connector available from Erntec (30/07/2008)

The CAN bus, originally developed for automobile engine management, is highly reliable. The CAN-Bus connector is available from Erntec.

LDG-S Enclosures series from Erntec (29/07/2008)

The LDG-S Enclosures series, from Erntec, is designed with an integrated snap-on clip for easy snap-on assembly onto DIN-rails (EN 50 022). The LDG-S enclosures feature a base part with integrated ventilation slot for effective ...

M36 DIN Rail mounting enclosures from Erntec (28/07/2008)

Erntec offers enclosures for M36 DIN-Rail mounting ranging from 1 module up to 9 modules. The M36 DIN Rail mounting enclosures series are designed for modern applications as, for instance, housing management equipment, relays ...

IDG-B2 and IDG-B4 DIN enclosures available from Erntec (28/07/2008)

The IDG-B2 and IDG-B4 DIN enclosures, available from Erntec, are fully insulated and fulfil the requirements of the machinery and car industry. The IDG-B2 and IDG-B4 DIN enclosures have an installation width of 35mm for ...

SMARTSHELL series of brushless DC-Servomotors

Faulhaber Group's brushless DC-Servomotors available from Erntec (25/07/2008)

Faulhaber Group, represented by Erntec, has introduced a new series of brushless DC-Servomotors, SMARTSHELL series.

Linear DC-Servomotor with non-magnetic alloy casing

Faulhaber Group's Linear DC-Servomotors available from Erntec (24/07/2008)

Faulhaber Group, represented by Erntec in Australia, has introduced new Linear DC-Servomotors, QUICKSHAFT LM 1247 series.

Erntec launches 4-pole brushless DC servomotors (23/07/2008)

Erntec has released a new range of 4-pole brushless DC servomotors, planetary gearheads, encoders and speed contollers.

ConPower circular connectors from Erntec (22/07/2008)

Erntec offers ConPower circular connectors. ConPower is a new power connector product series consisting of two lines: P30 with M23 and P70 with M40 threaded locking system.

ConPower P150 - series SL circular connector range from Erntec (18/07/2008)

With the product family, ConPower P150 - series SL, Coninvers has expanded its circular connector product programme by the power class M58 with metric screw locking for the cable connector and the cable connector receptacle, ...

D-Sub Connectors from Erntec (13/06/2008)

Erni Electronics is offering an extensive range of D-Sub connectors with precision stamped high-current contacts to meet the needs of SMT, Through-Hole Reflow (THR) and Press Fit applications.

ERmet ZD plus family for high-speed designs

Electrical connector system from Erntec (14/04/2008)

ERNI Electronics (DesignCon 2008, Booth 624) has announced the development of a new high-speed, differential, board-to-backplane electrical connector system which is available from Erntec.

MicroStac SMT connector series from Erntec (11/04/2008)

ERNI Electronics has expanded its MicroStac SMT connector series, available from Erntec, to include a 0.8mm grid with 9- and 14-pin versions.

Universal Power Modules from Erntec (10/04/2008)

ERNI Electronics has upgraded its hard metric Universal Power Module (UPM) to include new 5-, 6- and 7-pin versions which are available from Erntec.

Cable connectors available from Erntec (9/04/2008)

ERNI Electronics has made an even more compact version of its proven and tested board-on-IDC connector available as part of its 1.27mm SMC series.

Linear DC-servomotors available from Erntec (30/10/2007)

The newly developed linear DC-servomotor series LM 1247 responds to this demand: with dimensions as small as 12,5 x 47 mm and a weight of merely 56g, this actuator can produce a peak force of up to 9,4 nat full power.

Brushless DC-servomotors-sensorless available from Erntec (29/10/2007)

The new brushless DC-servomotors-sensorless design series completes the Faulhaber motor program; these motors exceed by far the operating lifetime of electro-mechanical commutated DC-micromotors.

New series circular connectors from Erntec (25/10/2007)

The new M8/M12 connectors available from Erntec are designed for lead-free processing.

New female DIN connectors available from Erntec (24/10/2007)

ERNI has introduced new female DIN connectors.

The DC-Micromotor Series 1024 with ironless rotor system.

High dynamic dc-micromotors (3/02/2006)

FAULHABER’S new DC-Micromotor Series 1024 with ironless rotor system is ideal whenever high torque in a small space is required. These motors with NdFeB magnets achieve a stall torque of 2,89mNm and speeds of up to 14 700rpm. ...

Illuminated bow-type handles (23/11/2005)

MENTOR's innovative illuminated bow-type handles offer real added value to the user. Available from Erntec Pty Ltd, the handles provide a safe grip in the dark, indicating states and conditions. The new illuminated handles ...

3mm horizontal multi-LEDs (22/11/2005)

MENTOR, represented in Australia by Erntec Pty Ltd, has developed horizontal SMD components for 3mm LEDs that are suitable for displaying switching status. An optional number of one to six LEDs are available in various quality, ...

Tray handle with integrated lighting (21/11/2005)

MENTOR has developed a new tray handle with integrated lighting especially for machine and casing doors. Available from Erntec Pty Ltd, the tray handle is uniformly light illuminated with a white LED, providing quick and ...

Coloured light guide system for front panel assembly (18/11/2005)

MENTOR’S coloured light guides are a novelty in the area of optoelectronics. Designed for transfer of light to the front panel, even if the light emitter is inactive - the system will still assign a signal display to the ...

Press-fit version of vertical D-sub connector (29/08/2005)

ERNI, represented in Australia by Erntec Pty Ltd, is now offering a press-fit version of its vertical D-subminiature (D-sub) series, which is part of the redesign of its complete family of D-sub connectors. The new part ...

LPV family with IDC termination for ribbon cables (23/08/2005)

ERNI's LPV family of IEC 60603-13 (DIN 41651) compliant connectors offers a comprehensive spectrum of board-to-cable connectors with a 2.54-mm pitch. The proven and reliable IDC technology ensures gas-tight and corrosion-resistant ...

Modular jacks with lightning strike protection (19/08/2005)

ERNI, represented in Australia by Erntec Pty Ltd, has developed a broad range of modular jacks, with integrated magnetics, for 10/100 Ethernet. These jacks are right-angle, single- port configurations meeting IEC60603-7 ...

The DiVar is suitable for custom specific applications.

New case line ‘DiVar’ (9/08/2005)

INTERMAS, represented in Australia by Erntec Pty Ltd, has released a new general case line, the DiVar, suitable for mounting non-standard (not 19 inch) components. Benefits include reasonable price and variable design of ...

Insertion forces are absorbed by the secure fit of the contacts in the insulating body.

D-sub vertical pressfit connectors (29/07/2005)

ERNTEC has released RoHS-compliant D-sub vertical pressfit connectors with a robust design that allows insertion forces to be absorbed by the secure fit of the contacts in the insulating body. Fully automatic processing ...

1mm diameter motor shaft ensures high rotational stability.

Micromotors achieve stall torque of 2.89mNm (28/07/2005)

ERNTEC has released the Faulhaber 1024 series of dc micromotors, with NdFeB magnets that achieve a stall torque of 2.89mNm and speeds of up to 14,700 rpm. It has an external motor diameter of 10mm and a length of 24mm, providing ...

Integrated magnetics in right-angle single-port and ganged configurations.

Modular jacks support Power-over-Ethernet (16/06/2005)

ERNI, represented in Australia by Erntec, has released integrated magnetic modular jacks that support remote power applications such as Power over Ethernet (PoE). The modular jacks have either hubs or circuitry for data ...

Dc-micromotor with integral encoder (18/03/2005)

FAULHABER Group, represented by Erntec, has added another powerful drive to its range of dc-micromotors with integral encoder, the 2232 SR series. The motor, featuring a diameter of 22mm, length of 32mm and an NdFeB magnet, ...

Can be used to implement a flexible input-output (I/O) or field-bus connection on the circuit board.

Four-pin M12 automation connector (10/02/2005)

ERNI, represented in Australia by Erntec, has released a four-pin M12 automation connector with D-coding. The connectors can be used to implement a flexible input-output (I/O) or field-bus connection on the circuit board. ...

Miniature motor with integral encoder (27/01/2005)

THE Faulhaber Group, represented by Erntec, has added another powerful drive to its range of dc-micromotors with integral encoder. The motor, featuring a diameter of 22mm, length of 32mm and an NdFeB magnet, boasts an exceptionally ...

Vertical RoHS-compliant D-Sub connectors (10/01/2005)

ERNI, represented by Erntec, is expanding its offering of SMT D-Subminiature connectors by adding vertical D-Subs for SMT applications. The vertical SMT D-Subs complement the existing right angle male and female SMT, press-fit, ...

Single port RJ45 connectors (3/12/2004)

ERNI has added RJ45 connectors to its MaxJack range. The new single-port MaxJack has a straight design and integrated magnetic filter components. It is configured for IEEE 802.3-compliant applications such as Gigabit Ethernet ...

Available in different sizes and custom pin-out configurations.

High speed cable connector systems (11/11/2004)

ERmet ZD cable assemblies are available from Erntec. They allow high-speed digital signals to be transmitted further and with superior signal fidelity.

Heat-resistant thermoplastic used for insulating body and suction pad.

D-sub vertical surface mount connectors (11/11/2004)

ERNI Elektroapparate GmbH, represented in Australia by Erntec, has released D-sub vertical surface mount connectors.

High pin-count application solution (13/10/2004)

ERNI has developed a solution to the dilemma posed by high pin-count hard-metric (HM) connectors and the need for precision connector mating combined with sufficient play between subrack guide rails and printed-circuit board ...

Unidirectional single-phase stepper motors. (4/06/2004)

ERNI has released two stepper motors from Arsape that are suitable for applications where µA current consumption is the key requirement.

Pin headers for IDC systems (4/06/2004)

ERNI has developed pin headers with through-hole reflow (THR) connections configured for IDC systems.

6 and 8-pole power connectors (13/05/2004)

ERNI has released ConPower, a power connector family with two lines, the P30 with M23 and the P70 with M40 threaded locking system. The transmitted electric power goes up to 70A at 630V max.

THR pin headers in a 2.54mm grid (22/04/2004)

ERNI's new LPV pin headers represent a popular standard for the connection of printed circuit boards or between interfaces. This is why THR (Thru Hole Reflow) pin headers were developed for today's modules with SMT assemblies.

D-sub connectors (10/03/2004)

ERNI’S new D-sub connectors have a silver plated surface and power contacts that are punched parts using SMT technology.

Mentor’s four section vertical light guide

Four section vertical light guide (10/03/2004)

MENTOR has developed a four section vertical light guide for applications where space is limited. It is available from Erni.

Thin profile dc micromotors (5/03/2004)

ERNI has released a series of thin profile dc micromotors. They offer low weight and superior reliability.

Angled surface mount connectors (16/01/2004)

ERNI has launched a new design for angled SMT D-Sub connectors. The new modular design improves functionality and allows easy generation of a large diversity of low cost variants.

Bus connector with spring technology (16/01/2004)

ERNI has introduced new cage clamp connection options for its ProfiBus and CanBus series field bus connectors. The connector contains a latching spring clip, which makes for very easy, quick connection - open the clip, insert ...

Lead-free Pressfit connectors (16/01/2004)

THE new D-Sub connectors for Pressfit technology from ERNI belong to a complete product family and supplement the SMT and THR technology variants. The Pressfit version is intended for applications in which, for example, ...

Smallest two-phase stepper motor (16/01/2004)

WITH an excellent power to volume ratio, 6mm outer diameter, 9.3mm length, and weighing only 1.4 grams, the new ADM 0620 from ERNI Australia is said to be the smallest two-phase stepper motor in the world.

Streamlined assembly of complex backplanes (12/12/2003)

ERNI has introduced a completely automated EPC III (ERNI Press Centre third generation) is now available for rapidly fitting printed circuit boards with connectors, accommodating large and complex backplanes with hundreds ...

Field bus connector with spring technology (29/08/2003)

ERNI has announced new cage clamp connection options for its ProfiBus and CanBus series field bus connectors. The connector contains a latching spring clip, which makes for very easy, quick connection -- open the clip, insert ...

World’s smallest 2-phase stepper motor (14/08/2003)

WITH an excellent power to volume ratio, 6mm outer diameter, 9.3mm length, and weighing only 1.4 grams, the new ADM 0620 from ERNI Australia is claimed as the smallest, produced in series, two-phase stepper motor in the ...

Bus compatible DIN-rail enclosures (14/08/2003)

THE LDG-S series enclosure is designed with an integrated snap-on clip for easy snap-on assembly onto DIN-rails (EN 50 022). The compact design allows economical space saving device assembly. For the termination of the cable ...

Protective covers for metric connectors (14/08/2003)

ERNI provides protective covers designed to protect the pre-alignment guides from breaking on 2mm Hard Metric right-angle and vertical female connectors. The protective covers are an extension of ERNI's broad 2mm Hard Metric ...

High-end piezo keyboards (14/08/2003)

FLEXIBLY designed, resistant to environmental influences and with an adjustable operating force: these are features of Mentor's Dynasim keyboard. Piezo keyboards do not have any moveable keys or contacts. When pressure is ...

PCB triple and quadruple light guides (14/08/2003)

ERNI Australia’s triple and quadruple light guides, on the basis of SMT technology, can be used as an alternative to a component with THT-LEDs, for showing the switching states at the front panel. Thanks to the smaller componentry ...

Integrated magnetic RJ45 connector (7/02/2003)

ERNI has announced the release of the integrated magnetic RJ45 connector for gigabit applications. This addition to the ERNI MaxJack line of integrated magnetic modular jacks is suitable for any application at this data ...

Wall mounting closed enclosure (31/01/2003)

AVAILABLE from ERNI Australia, the new enclosure type 602 is a closed version designed for wall mounting. This enclosure has not been fitted with ventilation slots, making it a suitable enclosure to fit into dusty and moistures ...

Controller area network (CAN) switch (31/01/2003)

ERNI has extended the established bus-interface connector family with the ERbic MAX CAN switch. The new backshell design MAX stands for a diecast metal housing, which is suitable for applications in rough environments and ...

THT and SMD LED tester (31/01/2003)

THE new LED tester from Mentor displays a host of features for fast and uncomplicated testing of standard SMD LEDs. It has numerous test slots for various LED types.

Two stage light pipe conductor (31/01/2003)

THE new variable length light conductor from Mentor, represented by Erni Australia, makes this two-stage display particularly suitable for display panel applications. Set onto CHIP LEDs, the light conductor replaces the ...

Dc-micromotor and planetary gearhead (29/01/2003)

MINIMOTOR, represented by Erni Australia, has developed a new subminiature line of dc-micromotors and planetary gearheads which further extends its range of precision miniature drive systems. The ironless dc-micromotor, ...

RSS Feed

News sign up |

Collapse Additional ERNTEC News

News sign up

Opengear's new system for centrally monitoring networks (20/11/2009)

Opengear's team of design engineers in Brisbane have created an affordable new system for centrally monitoring all the applications, computers and devices in distributed networks.

Introducing a small new Optical Mouse, the Z-Nano (13/11/2009)

Z-Nano is a small optical computer mouse around, measuring at a mere 42 x 21 x 17.65mm. Though small, Z-Nano performs all the functions of a normal mouse.

The Advanced Alarm System from Balmoral Technologies (13/11/2009)

The Advanced Alarm System from Balmoral Technologies comprises a range of features, including Alarm Database.

PC1620 Programmable Controller – Enclosure with LCD

PC1600 Series of Programmable Controllers - Tough, smart and very flexible (12/11/2009)

Dominion Electronics, designers and providers of hardened monitoring, automation, control and information systems are already recognised globally for their “tough and smart” products - but now there c

Metromatics releases the MetroSpec Rugged Industrial 12.1” Panel PC (10/11/2009)

The MS12 1500PC has been designed and manufactured to operate within these extremities whilst providing viewable and workable data, whatever environmental conditions.

RSS Feed

News sign up

Sections

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.

Erntec distribute Sloped Handheld Enclosures Series 1100

More products from ERNTEC

Additional ERNTEC News

Related Articles

Sections