Home > Board-to-cable connectors available from Erntec

Board-to-cable connectors available from Erntec

Supplier News
article image Board-to-cable connectors
+61 3 9756 4000

Contact supplier

Your Email * indicates mandatory fields.

Erntec 's LPV family of IEC 60603-13 (DIN 41651) compliant connectors offers a spectrum of board-to-cable connectors with a 2.54mm pitch. The proven and reliable IDC technology that is employed ensures gas-tight and corrosion-resistant contact with a low contact resistance throughout the product's service life.

An integrated polarising key in the middle of the connector housing prevents incorrect mating and damaged contacts. Optional locking latches secure the connection by providing additional protection against inadvertent release caused by strain from vibrations and shock loads. When the locking latch is opened, the female connectors are lifted out of the contact evenly in order to prevent damage.

The female connector is designed to be used with 1.27mm ribbon cables. The IDC contacts cut through the insulation material, so it is not necessary to strip off the insulation. The strain relief clamps that are included in the delivery make it possible to lead cables out at an angle of 90° or 180° to the plug connector.

The male connectors are available with press-fit, wave-soldering and through-hole-reflow termination. Besides the standard overall height of 17mm, there is also low-profile, 9.4mm versions available. There are ten housing sizes available for both male and female connectors in pin configurations, with 10, 14, 16, 20, 26, 34, 40, 50, 60 and 64 positions.

Newsletter sign-up

The latest products and news delivered to your inbox