E-T-A ElectroTechnical Applications

E-T-A ElectroTechnical Applications News

The 1120 thermal overcurrent circuit breaker

1120 thermal overcurrent circuit breakers from E-T-A ElectroTechnical Applications (21/01/2009)

The new E-T-A 1120 thermal overcurrent circuit breaker, available from E-T-A ElectroTechnical Applications, is a single or double pole combined circuit breaker and On/Off switch with rocker actuation.

ESX10-T electronic circuit protector available from E-T-A ElectroTechnical Applications (20/01/2009)

Electronic overcurrent protection provided by the E-T-A ElectroTechnical Applications electronic circuit protector, ESX10-T, ensures selective disconnection of faulty load circuits with high cable attenuation.

4220-T thermal magnetic circuit breakers available from E-T-A ElectroTechnical Applications (19/01/2009)

According to E-T-A ElectroTechnical Applications, trailing cables, blocked motors, defective peripherals are some of the risks in modern factory automation and process control as they can be dangerous to both personnel and ...

Miniaturised thermal type 1610 from E-T-A ElectroTechnical Applications (7/02/2008)

E-T-A ElectroTechnical Applications’ miniaturised thermal type 1610 protects loads and electrical systems in passenger cars and commercial vehicles.

Type 1170 circuit breaker available from E-T-A ElectroTechnical Applications (6/02/2008)

Type 1170 is a compact thermal E-T-A circuit breaker with push-to-reset trip free double contact mechanism.

E-T-A’s thermal magnetic type 452 Circuit Breaker

Thermal magnetic type 452 Circuit Breaker from E-T-A ElectroTechnical Applications (5/02/2008)

E-T-A ElectroTechnical Applications’ thermal magnetic type 452 Circuit Breaker provides continuous current ratings of up to 100A.

Types 412 and 413 E-T-A circuit breakers

Type 412 and 413 E-T-A circuit breakers from E-T-A ElectroTechnical Applications (4/02/2008)

Type 412 and 413 E-T-A circuit breakers offer a high level of reliability and safety.

E-T-A circuit breakers 4130 and 2-5700 from E-T-A ElectroTechnical Applications (1/02/2008)

The single pole thermal E-T-A circuit breakers 4130 and 2-5700 are a good choice when it comes to protecting your equipment in harsh conditions.

Types 3120 and 3130 - Combined switch and circuit breaker

Combined E-T-A switch/circuit breaker from E-T-A ElectroTechnical Applications (31/01/2008)

Fewer components, less wiring time, attractive styling – these are some of the benefits of choosing the combined E-T-A switch/circuit breaker type 3120 or 3130.

Thermal overcurrent circuit breaker (10/08/2006)

THE new E-T-A thermal overcurrent circuit breaker is a single or double pole combined circuit breaker with an ON/OFF switch with rocker actuation. The new device - designed particularly for manufacturers of high quantities ...

Magnetic CB remote ON/OFF actuation (10/08/2006)

THE X8345-R is an additional module which provides remotely controlled ON and OFF functionality for the E-T-A series 8345 magnetic circuit breaker range. Combined with the motor-driven remote control module, type 8345 may ...

Auto-electrical fault finding kit (10/08/2006)

THE E-T-A fault finding kit provides auto-electrical tradesmen with a safe and reliable method of testing low voltage circuits up to 28V. By installing a circuit breaker the circuits can be tested and reset numerous times ...

Rocker-actuated circuit breaker (9/08/2006)

THE E-T-A circuit breaker series 3131 is a combination of an attractively designed switch with overload protection. IP66-rated integral water splash protection helps to make the series suitable for marine applications, including ...

Monitoring head for big pipe sizes (2/02/2006)

THE new E-T-A ElectroTechnical Applications’ monitoring head, MKV has been especially designed for applications where flow monitor and monitoring head have to work independently from each other and for applications involving ...

The NR260 sensor is also suitable for the chemical industry.

Capacitive level sensor for use in fuel cells (1/02/2006)

E-T-A's capacitive level sensor NR 260 further extends the company’s product range of capacitive level sensors. It is an extremely robust and high-quality device particularly designed for use in fuel cells. This seminal ...

Suitable for use in tool machines or packaging machines.

Electronic circuit protector for automation (31/01/2006)

E-T-A Electrotechnical Applications, specialists for the protection of DC24V circuits in factory automation, has extended their product range of electronic overcurrent protectors with an electronic circuit protector, the ...

Extended range of flow monitors (30/01/2006)

E-T-A's range of flow monitors and meters is suitable for widespread applications ranging from the chemical industry over industrial engineering up to process control in cooling equipment. Monitored media are water and watery ...

RSS Feed

News sign up

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.