Home > Donaldson Australasia supplies ducting and fume extraction systems

Donaldson Australasia supplies ducting and fume extraction systems

Supplier News
article image Toyota plant
1800 345837

Contact supplier

Your Email * indicates mandatory fields.

Pneuvay Engineering has recently fitted a high-capacity welding fume extraction plant to the Toyota ‘Unit Parts’ manufacturing plant at Altona, Victoria. The extraction system was developed in collaboration with Donaldson Australasia .

In what rates as the large integrated installation of Donaldson Downflo collector technology in Australia, the design and fitout by Pneuvay utilised a Donaldson Torit DF04-80(x4) dust collector.

The system incorporates four individual 1200mm diameter ducts. Each of these ducts is installed with spark arresters to remove primary particulate. Dust and fume remnant is collected in 200litre drum.

The system is designed to handle approximately 200,000m3/hr and incorporates 160 filter cartridges and a duplex 2x150kw fan arrangement.

Toyota's ‘Unit Parts’ plant is being used to manufacture components for its new lines of Camry and Aurion vehicles.

All ducting and extraction technology supplied by Donaldson Australasia for this project was installed according to Australian Standards as well as Toyota’s stringent global benchmark on OH&S and environmental management.

Managing director of Pneuvay Engineering, Michael Francis, says Toyota laid down a strict project brief with a requirement for completely contained extraction of fumes generated by robotic welding,

“The integration of the fume extraction system was paramount in the new building meeting Toyotas strict OH&S requirements,” said Francis.

“Key to the integrated technology of this system is Donaldson’s DF04-80(x4) series fume extraction system that uses FR Ultra Web filters.”

“With the plant having capacity to operate on a 24/7 basis, it was imperative to ensure the system engineered completely contains the mist from the moment it is sucked through a collection point to the time it emerges as completely clean air.

“The entire installation is situated outside the plant and is more than 25 metres long,” said Francis

Overall there is nearly 300 m of ducting throughout the new building that draws fume generated by the robotic welding activity.

This fume is drawn up into any one of four spark arrestors through duct lines that are 1200mm in diameter.

From there the fume is transferred into a primary manifold and is passed through the filtration process filters.

Clean air is discharged, which can go through into the atmosphere or directed back into the building (which has conditioned air).

Pneuvay Engineering is a major user of Donaldson Australasia technology. The company specialises in pneumatic conveying and materials handling systems.

Newsletter sign-up

The latest products and news delivered to your inbox