Unipower's distribution panel series is designed for users who need, or prefer, front panel connections.
The DPGF1U series provides distribution and overload protection for six or 12 circuits and the 1U high unit can be mounted in either a 19 or 23in rack.
The GMT fuse panels provide up to six single-bus fuses or 12 dual-bus (A&B) fuses with a capacity of 80A of load current per bus.
As a result, the DPGF1U can distribute up to a total of 160A with true A & B distribution and alarm functions. Fuse sizes from 0.5 to 20A can be accommodated.
Both sections of the dual-bus distribution panel are isolated and can be separately configured to operate from 12, 24 or 48V, positive or negative ground. Fuse alarm is indicated by a red LED for each bus and two Form C relay contacts per load.
To allow the new distribution panel to be aligned with other rack-mounted equipment, the DPGF1U can be mounted from the front of the rack, with offsets every quarter-inch from front to back.
All models meet the requirements of all relevant safety standards including UL60950-1, CSA22.2 No. 60950-1 and EN60950-1. The DPGF1U series units are RoHS compliant.
The DPGF1U series units are available from Dewar Electronics.